SoftCast

The focus of this demonstration is the performance of streaming video over the mobile wireless channel. We compare two schemes: the standard approach to video which transmits H.264/AVC-encoded stream over 802.11-like PHY, and SoftCast -- a clean-slate design for wireless video where the source transmits one video stream that each receiver decodes to a video quality commensurate with its specific instantaneous channel quality

SoftCast: Clean-slate Scalable Wireless Video

Video broadcast and mobile video challenge the conventional wireless design. In broadcast and mobile scenarios the bit rate supported by the channel differs across receivers and varies quickly over time. The conventional design however forces the source to pick a single bit rate and degrades sharply when the channel cannot not support the chosen bit rate. This paper presents SoftCast, a clean-slate design for wireless video where the source transmits one video stream that each receiver decodes to a video quality commensurate with its specific instantaneous channel quality. To do so, SoftCast ensures the samples of the digital video signal transmitted on the channel are linearly related to the pixels' luminance. Thus, when channel noise perturbs the transmitted signal samples, the perturbation naturally translates into approximation in the original video pixels. Hence, a receiver with a good channel (low noise) obtains a high fidelity video, and a receiver with a bad channel (high noise) obtains a low fidelity video. We implement SoftCast using the GNURadio software and the USRP platform. Results from a 20-node testbed show that SoftCast improves the average video quality (i.e., PSNR) across broadcast receivers in our testbed by up to 5.5dB. Even for a single receiver, it eliminates video glitches caused by mobility and increases robustness to packet loss by an order of magnitude

Exposing a waveform interface to the wireless channel for scalable video broadcast

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2011.Cataloged from PDF version of thesis.Includes bibliographical references (p. 157-167).Video broadcast and mobile video challenge the conventional wireless design. In broadcast and mobile scenarios the bit-rate supported by the channel differs across receivers and varies quickly over time. The conventional design however forces the source to pick a single bit-rate and degrades sharply when the channel cannot support it. This thesis presents SoftCast, a clean-slate design for wireless video where the source transmits one video stream that each receiver decodes to a video quality commensurate with its specific instantaneous channel quality. To do so, SoftCast ensures the samples of the digital video signal transmitted on the channel are linearly related to the pixels' luminance. Thus, when channel noise perturbs the transmitted signal samples, the perturbation naturally translates into approximation in the original video pixels. Hence, a receiver with a good channel (low noise) obtains a high fidelity video, and a receiver with a bad channel (high noise) obtains a low fidelity video. SoftCast's linear design in essence resembles the traditional analog approach to communication, which was abandoned in most major communication systems, as it does not enjoy the theoretical opimality of the digital separate design in point-topoint channels nor its effectiveness at compressing the source data. In this thesis, I show that in combination with decorrelating transforms common to modern digital video compression, the analog approach can achieve performance competitive with the prevalent digital design for a wide variety of practical point-to-point scenarios, and outperforms it in the broadcast and mobile scenarios. Since the conventional bit-pipe interface of the wireless physical layer (PHY) forces the separation of source and channel coding, to realize SoftCast, architectural changes to the wireless PHY are necessary. This thesis discusses the design of RawPHY, a reorganization of the PHY which exposes a waveform interface to the channel while shielding the designers of the higher layers from much of the perplexity of the wireless channel. I implement SoftCast and RawPHY using the GNURadio software and the USRP platform. Results from a 20-node testbed show that SoftCast improves the average video quality (i.e., PSNR) across diverse broadcast receivers in our testbed by up to 5.5 dB in comparison to conventional single- or multi-layer video. Even for a single receiver, it eliminates video glitches caused by mobility and increases robustness to packet loss by an order of magnitude.by Szymon Kazimierz Jakubczak.Ph.D

Semantic and effective communications

Shannon and Weaver categorized communications into three levels of problems: the technical problem, which tries to answer the question "how accurately can the symbols of communication be transmitted?"; the semantic problem, which asks the question "how precisely do the transmitted symbols convey the desired meaning?"; the effectiveness problem, which strives to answer the question "how effectively does the received meaning affect conduct in the desired way?". Traditionally, communication technologies mainly addressed the technical problem, ignoring the semantics or the effectiveness problems. Recently, there has been increasing interest to address the higher level semantic and effectiveness problems, with proposals ranging from semantic to goal oriented communications. In this thesis, we propose to formulate the semantic problem as a joint source-channel coding (JSCC) problem and the effectiveness problem as a multi-agent partially observable Markov decision process (MA-POMDP). As such, for the semantic problem, we propose DeepWiVe, the first-ever end-to-end JSCC video transmission scheme that leverages the power of deep neural networks (DNNs) to directly map video signals to channel symbols, combining video compression, channel coding, and modulation steps into a single neural transform. We also further show that it is possible to use predefined constellation designs as well as secure the physical layer communication against eavesdroppers for deep learning (DL) driven JSCC schemes, making such schemes much more viable for deployment in the real world. For the effectiveness problem, we propose a novel formulation by considering multiple agents communicating over a noisy channel in order to achieve better coordination and cooperation in a multi-agent reinforcement learning (MARL) framework. Specifically, we consider a MA-POMDP, in which the agents, in addition to interacting with the environment, can also communicate with each other over a noisy communication channel. The noisy communication channel is considered explicitly as part of the dynamics of the environment, and the message each agent sends is part of the action that the agent can take. As a result, the agents learn not only to collaborate with each other but also to communicate "effectively'' over a noisy channel. Moreover, we show that this framework generalizes both the semantic and technical problems. In both instances, we show that the resultant communication scheme is superior to one where the communication is considered separately from the underlying semantic or goal of the problem.Open Acces

Softcast with per-carrier power-constrained channels

This paper considers the Softcast joint source-channel video coding scheme for data transmission over parallel channels with different power constraints and noise characteristics, typical in DSL or PLT channels. To minimize the mean square error at receiver, an optimal precoding matrix design problem has to be solved, which requires the solution of an inverse eigenvalue problem. Such solution is taken from the MIMO channel precoder design literature. Alternative suboptimal precoding matrices are also proposed and analyzed, showing the efficiency of the optimal precoding matrix within Softcast, which provides gains increasing with the encoded video quality

Softcast with per-carrier power-constrained channels

International audienceThis paper considers the Softcast joint source-channel video coding scheme for data transmission over parallel channels with different power constraints and noise characteristics, typical in DSL or PLT channels. To minimize the mean square error at receiver, an optimal precoding matrix design problem has to be solved, which requires the solution of an inverse eigenvalue problem. Such solution is taken from the MIMO channel precoder design literature. Alternative sub-optimal precoding matrices are also proposed and analyzed, showing the efficiency of the optimal precoding matrix within Softcast, which provides gains increasing with the encoded video quality