Singular value decomposition rank-deficient-based estimators in TD-SCDMA systems

This paper presents a new joint channel estimation method for Time Division-Synchronous Code Division Multiple Access (TD-SCDMA) systems based on a Singular Value Decomposition (SVD) reduced-rank technique. The system capacity is increased by increasing the highest number of users in one time slot. The additional channel estimation processing required for the increasing number of users is solved by adopting the reduced-rank technique, which estimates a limited number of parameters that are needed to describe the channel matrix and reduce the dimensionality of this matrix. Simulation results prove the validity of the proposed reduced-rank technique for channel estimation accuracy enhancing. Additionally, it is shown that the detectors based on the reduced-rank estimators outperform traditional channel estimators, contributing to 7.8 and 6.9 dB BER performance improvements for indoor and vehicular channels, respectively

Reduced-rank technique for joint channel estimation in TD-SCDMA systems.

In time division-synchronous code division multiple access systems, the channel estimation for multiple subscribers requires the computation of very complicated algorithms through short training sequences. This situation causes mismodeling of the actual channels and introduces significant errors in the detected data of multiple users. This paper presents a novel channel estimation method with low complexity, which relies on reducing the rank order of the total channel matrix H. We exploit the rank deficient of H to reduce the number of parameters that characterizes this matrix. The adopted reduced rank technique is based on singular value decomposition algorithm. Equations for reduced rank-joint channel estimation (JCE) are derived and compared against traditional full rank-joint channel estimators: least square (LS) or Steiner, enhanced LS, and minimum mean square error algorithms. Simulation results of the normalized mean square error for the above mentioned estimators showed the superiority of reduced rank estimators. Multi-user joint data detectors based linear equalizers are used to suppress inter-symbol interference and mitigate intra-cell multiple access interference. The detectors: zero forcing block linear equalizer and minimum mean square error block linear equalizer algorithms are considered in this paper to recover the data. The results of bit error rate simulation have shown that reduced rank-JCE based detectors have an improvement by 5 dB lower than other traditional full rank-JCE based detectors

Multiuser MIMO-OFDM for Next-Generation Wireless Systems

This overview portrays the 40-year evolution of orthogonal frequency division multiplexing (OFDM) research. The amelioration of powerful multicarrier OFDM arrangements with multiple-input multiple-output (MIMO) systems has numerous benefits, which are detailed in this treatise. We continue by highlighting the limitations of conventional detection and channel estimation techniques designed for multiuser MIMO OFDM systems in the so-called rank-deficient scenarios, where the number of users supported or the number of transmit antennas employed exceeds the number of receiver antennas. This is often encountered in practice, unless we limit the number of users granted access in the base station’s or radio port’s coverage area. Following a historical perspective on the associated design problems and their state-of-the-art solutions, the second half of this treatise details a range of classic multiuser detectors (MUDs) designed for MIMO-OFDM systems and characterizes their achievable performance. A further section aims for identifying novel cutting-edge genetic algorithm (GA)-aided detector solutions, which have found numerous applications in wireless communications in recent years. In an effort to stimulate the cross pollination of ideas across the machine learning, optimization, signal processing, and wireless communications research communities, we will review the broadly applicable principles of various GA-assisted optimization techniques, which were recently proposed also for employment inmultiuser MIMO OFDM. In order to stimulate new research, we demonstrate that the family of GA-aided MUDs is capable of achieving a near-optimum performance at the cost of a significantly lower computational complexity than that imposed by their optimum maximum-likelihood (ML) MUD aided counterparts. The paper is concluded by outlining a range of future research options that may find their way into next-generation wireless systems

Bearing estimation techniques for improved performance spread spectrum receivers

The main topic of this thesis is the use of bearing estimation techniques combined with multiple antenna elements for spread spectrum receivers. The motivation behind this work is twofold: firstly, this type of receiver structure may offer the ability to locate the position of a mobile radio in an urban environment. Secondly, these algorithms permit the application of space division multiple access (SDMA) to cellular mobile radio, which can offer large system capacity increases. The structure of these receivers may naturally be divided into two parts: signal detection and spatial filtering blocks. The signal detection problem involves locating the bearings of the multipath components which arise from the transmission of the desired user’s signal. There are a number of approaches to this problem, but here the MUSIC algorithm will be adopted. This algorithm requires an initial estimate of the number of signals impinging on the receiver, a task which can be performed by model order determination techniques. A major deficiency of MUSIC is its inability to resolve the highly–correlated and coherent multipath signals which frequently occur in a spread spectrum system. One of the simplest ways to overcome this problem is to employ spatial smoothing techniques, which trade the size of the antenna array for the ability to resolve coherent signals. The minimum description length (MDL) is one method for determining the signal model order and it can easily be extended to calculating the required degree of spatial smoothing. In this thesis, an approach to analysing the probability of correct model order determination for the MDL with spatial smoothing is presented. The performance of MUSIC, combined with spatial smoothing, is also of great significance. Two smoothing algorithms, spatial smoothing and forward–backward spatial smoothing, are analysed to compare their performance. If SDMA techniques are to be deployed in cellular systems, it is important to first estimate the performance improvements available from applying antenna array spatial filters. Initially, an additive white Gaussian noise channel is used for estimating the capacity of a perfect power–controlled code division multiple access system with SDMA techniques. Results suggest that the mean interference levels are almost halved as the antenna array size doubles, permitting large capacity increases. More realistic multipath models for urban cellular radio channels are also considered. If the transmitter gives rise to a number of point source multipath components, the bearing estimation receiver is able to capture the signal energy of each multipath. However, when a multipath component has significant angular spread, bearing estimation receivers need to combine separate directional components, at an increased cost in complexity, to obtain similar results to a matched filter. Finally, a source location algorithm for urban environments is presented, based on bearing estimation of multipath components. This algorithm requires accurate knowledge of the positions of the major multipath reflectors present in the environment. With this knowledge it is possible to determine the position of a transmitting mobile unit. Simulation results suggest that the algorithm is very sensitive to angular separation of the multipath components used for the source location technique