1,659 research outputs found
Interconnect tree optimization algorithm in nanometer very large scale integration designs
This thesis proposes a graph-based maze routing and buffer insertion algorithm for nanometer Very Large Scale Integration (VLSI) layout designs. The algorithm is called Hybrid Routing Tree and Buffer insertion with Look-Ahead (HRTB-LA). In recent VLSI designs, interconnect delay becomes a dominant factor compared to gate delay. The well-known technique to minimize the interconnect delay is by inserting buffers along the interconnect wires. In conventional buffer insertion algorithms, the buffers are inserted on the fixed routing paths. However, in a modern design, there are macro blocks that prohibit any buffer insertion in their respective area. Most of the conventional buffer insertion algorithms do not consider these obstacles. In the presence of buffer obstacles, post routing algorithm may produce poor solution. On the other hand, simultaneous routing and buffer insertion algorithm offers a better solution, but it was proven to be NP-complete. Besides timing performance, power dissipation of the inserted buffers is another metric that needs to be optimized. Research has shown that power dissipation overhead due to buffer insertions is significantly high. In other words, interconnect delay and power dissipation move in opposite directions. Although many methodologies to optimize timing performance with power constraint have been proposed, no algorithm is based on grid graph technique. Hence, the main contribution of this thesis is an efficient algorithm using a hybrid approach for multi-constraint optimization in multi-terminal nets. The algorithm uses dynamic programming to compute the interconnect delay and power dissipation of the inserted buffers incrementally, while an effective runtime is achieved with the aid of novel look-ahead and graph pruning schemes. Experimental results prove that HRTB-LA is able to handle multi-constraint optimizations and produces up to 47% better solution compared to a post routing buffer insertion algorithm in comparable runtime
Throughput-driven floorplanning with wire pipelining
The size of future high-performance SoC is such that the time-of-flight of wires connecting distant pins in the layout can be much higher than the clock period. In order to keep the frequency as high as possible, the wires may be pipelined. However, the insertion of flip-flops may alter the throughput of the system due to the presence of loops in the logic netlist. In this paper, we address the problem of floorplanning a large design where long interconnects are pipelined by inserting the throughput in the cost function of a tool based on simulated annealing. The results obtained on a series of benchmarks are then validated using a simple router that breaks long interconnects by suitably placing flip-flops along the wires
Performance and power optimization in VLSI physical design
As VLSI technology enters the nanoscale regime, a great amount of efforts have
been made to reduce interconnect delay. Among them, buffer insertion stands out
as an effective technique for timing optimization. A dramatic rise in on-chip buffer
density has been witnessed. For example, in two recent IBM ASIC designs, 25% gates
are buffers.
In this thesis, three buffer insertion algorithms are presented for the procedure
of performance and power optimization. The second chapter focuses on improving circuit performance under inductance effect. The new algorithm works under
the dynamic programming framework and runs in provably linear time for multiple
buffer types due to two novel techniques: restrictive cost bucketing and efficient delay
update. The experimental results demonstrate that our linear time algorithm consistently outperforms all known RLC buffering algorithms in terms of both solution
quality and runtime. That is, the new algorithm uses fewer buffers, runs in shorter
time and the buffered tree has better timing.
The third chapter presents a method to guarantee a high fidelity signal transmission in global bus. It proposes a new redundant via insertion technique to reduce
via variation and signal distortion in twisted differential line. In addition, a new
buffer insertion technique is proposed to synchronize the transmitted signals, thus
further improving the effectiveness of the twisted differential line. Experimental results demonstrate a 6GHz signal can be transmitted with high fidelity using the new
approaches. In contrast, only a 100MHz signal can be reliably transmitted using a
single-end bus with power/ground shielding. Compared to conventional twisted differential line structure, our new techniques can reduce the magnitude of noise by 45%
as witnessed in our simulation.
The fourth chapter proposes a buffer insertion and gate sizing algorithm for
million plus gates. The algorithm takes a combinational circuit as input instead of
individual nets and greatly reduces the buffer and gate cost of the entire circuit.
The algorithm has two main features: 1) A circuit partition technique based on the
criticality of the primary inputs, which provides the scalability for the algorithm, and
2) A linear programming formulation of non-linear delay versus cost tradeoff, which
formulates the simultaneous buffer insertion and gate sizing into linear programming
problem. Experimental results on ISCAS85 circuits show that even without the circuit
partition technique, the new algorithm achieves 17X speedup compared with path
based algorithm. In the meantime, the new algorithm saves 16.0% buffer cost, 4.9%
gate cost, 5.8% total cost and results in less circuit delay
Silicon circuits for chip-to-chip communications in multi-socket server board interconnects
Multi-socket server boards (MSBs) exploit the interconnection of multiple processor chips towards forming powerful cache coherent systems, with the interconnect technology comprising a key element in boosting processing performance. Here, we present an overview of the current electrical interconnects for MSBs, outlining the main challenges currently faced. We propose the use of silicon photonics (SiPho) towards advancing interconnect throughput, socket connectivity and energy efficiency in MSB layouts, enabling a flat-topology wavelength division multiplexing (WDM)-based point-to-point (p2p) optical MSB interconnect scheme. We demonstrate WDM SiPho transceivers (TxRxs) co-assembled with their electronic circuits for up to 50 Gb/s line rate and 400 Gb/s aggregate data transmission and SiPho arrayed waveguide grating routers that can offer collision-less time of flight connectivity for up to 16 nodes. The capacity can scale to 2.8 Gb/s for an eight-socket MSB, when line rate scales to 50 Gb/s, yielding up to 69% energy reduction compared with the QuickPath Interconnect and highlighting the feasibility of single-hop p2p interconnects in MSB systems with >4 sockets
A neural probe with up to 966 electrodes and up to 384 configurable channels in 0.13 μm SOI CMOS
In vivo recording of neural action-potential and local-field-potential signals requires the use of high-resolution penetrating probes. Several international initiatives to better understand the brain are driving technology efforts towards maximizing the number of recording sites while minimizing the neural probe dimensions. We designed and fabricated (0.13-μm SOI Al CMOS) a 384-channel configurable neural probe for large-scale in vivo recording of neural signals. Up to 966 selectable active electrodes were integrated along an implantable shank (70 μm wide, 10 mm long, 20 μm thick), achieving a crosstalk of −64.4 dB. The probe base (5 × 9 mm2) implements dual-band recording and a 1
Recommended from our members
Interconnect optimizations for nanometer VLSI design
textAs the semiconductor technology scales into deeper sub-micron domain, billions of transistors can be used on a single system-on-chip (SOC) makes interconnection optimization more important roughly for two reasons. First, congestion, power, timing in routing and buffering requirements make inter- connection optimization more and more challenging. Second, gate delay get- ting shorter while the RC delay gets longer due to scaling. Study of interconnection construction and optimization algorithms in real industry flows and designs ends up with interesting findings. One used to be overlooked but very important and practical problem is how to utilize over- the-block routing resources intelligently. Routing over large IP blocks needs special attention as there is almost no way to insert buffers inside hard IP blocks, which can lead to unsolvable slew/timing violations. In current design flows we have seen, the routing resources over the IP blocks were either dealt as routing blockages leading to a significant waste, or simply treated in the same way as outside-the-block routing resources, which would violate the slew constraints and thus fail buffering. To handle that, this work proposes a novel buffering-aware over-the- block rectilinear Steiner minimum tree (BOB-RSMT) algorithm which helps reclaim the “wasted” over-the-block routing resources while meeting user-specified slew constraints. Proposed algorithm incrementally and efficiently migrates initial tree structures with buffering-awareness to meet slew constraints while minimizing wire-length. Moreover, due to the fact that timing optimization is important for the VLSI design, in this work, timing-driven over-the-block rectilinear Steiner tree (TOB-RST) is also studied to optimize critical paths. This proposed TOB-RST algorithm can be used in routing or post-routing stage to provide high-quality topologies to help close timing. Then a follow-up problem emerges: how to accomplish the whole routing with over-the-block routing resources used properly. Utilizing over-the- block routing resources could dramatically improve the routing solution, yet require special attention, since the slew, affected by different RC on different metal layers, must be constrained by buffering and is easily violated. Moreover, even of all nets are slew-legalized, the routing solution could still suffer from heavy congestion problem. A new global router, BOB-Router, is to solve the over-the-block global routing problem through minimizing overflows, wire-length and via count simultaneously without violating slew constraints. Based on my completed works, BOB-RSMT and BOB-Router tremendously improve the overall routing and buffering quality. Experimental results show that proposed over-the-block rectilinear Steiner tree construction and routing completely satisfies the slew constraints and significantly outperforms the obstacle-avoiding rectilinear Steiner tree construction and routing in terms of wire-length, via count and overflows.Electrical and Computer Engineerin
- …