Analysis of roof-to-street propagation for fixed broadband wireless access

Fixed Wireless Access (FWA) is an alternative solution to fiber that leverages mobile wireless technology to deliver internet connectivity to the final user in an affordable way. Now, with the advent of 5G New Radio (5G NR), The FWA capabilities can be fully exploited bringing several advantages, much more than before. When dimensioning a FWA network, two meaningful factors must be considered: the received power at CPE side and the estimation of the signal attenuation. In order to identify the best place where to locate the equipment, a detailed analysis is needed to investigate how the signal propagates and interacts with the radio environment, thus propagation models help us to achieve this important goal. Nowadays, several models of different kind and complexity have been studied and developed with the common assumption that the user equipment is at street level. Unfortunately, this restriction is not suitable for FWA commercial applications, since the receiving antenna should be placed higher than ground level for a good reception for both indoor and outdoor places, therefore it is necessary to tune these models for a more flexible analysis. The present work has statistically assessed the roof-to-user correction factor, here called floor gain factor, to take into account the actual placement of Customer Premise Equipment (CPE) with respect to the ground level. In particular, we provide the proper adjustment to propagation models at different heights from the ground, in order to have the right prediction of signal attenuation, in the 3.6 GHz frequency band. In addition, a physical-statistical model has been developed in order to is to validate empirical data and to support the analysis, offering the opportunity to examine each single ray and see how radio propagation mechanisms work in the roof-to-street (RTS) case

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Études des systèmes de communications sans-fil dans un environnement rural difficile

Les systèmes de communication sans fil, ayant de nombreux avantages pour les zones rurales, peuvent aider la population à bien s'y établir au lieu de déménager vers les centres urbains, accentuant ainsi les problèmes d’embouteillage, de pollution et d’habitation. Pour une planification et un déploiement efficace de ces systèmes, l'atténuation du signal radio et la réussite des liens d’accès doivent être envisagées. Ce travail s’intéresse à la provision d’accès Internet sans fil dans le contexte rural canadien caractérisé par sa végétation dense et ses variations climatiques extrêmes vu que les solutions existantes sont plus concentrées sur les zones urbaines. Pour cela, nous étudions plusieurs cas d’environnements difficiles affectant les performances des systèmes de communication. Ensuite, nous comparons les systèmes de communication sans fil les plus connus. Le réseau sans fil fixe utilisant le Wi-Fi ayant l’option de longue portée est choisi pour fournir les communications aux zones rurales. De plus, nous évaluons l'atténuation du signal radio, car les modèles existants sont conçus, en majorité, pour les technologies mobiles en zones urbaines. Puis, nous concevons un nouveau modèle empirique pour les pertes de propagation. Des approches utilisant l’apprentissage automatique sont ensuite proposées, afin de prédire le succès des liens sans fil, d’optimiser le choix des points d'accès et d’établir les limites de validité des paramètres des liens sans fil fiables. Les solutions proposées font preuve de précision (jusqu’à 94 % et 8 dB RMSE) et de simplicité, tout en considérant une multitude de paramètres difficiles à prendre en compte tous ensemble avec les solutions classiques existantes. Les approches proposées requièrent des données fiables qui sont généralement difficiles à acquérir. Dans notre cas, les données de DIGICOM, un fournisseur Internet sans fil en zone rurale canadien, sont utilisées. Wireless communication systems have many advantages for rural areas, as they can help people settle comfortably and conveniently in these regions instead of relocating to urban centers causing various overcrowding, habitation, and pollution problems. For effective planning and deployment of these technologies, the attenuation of the radio signal and the success of radio links must be precisely predicted. This work examines the provision of wireless internet access in the Canadian rural context, characterized by its dense vegetation and its extreme climatic variations, since existing solutions are more focused on urban areas. Hence, we study several cases of difficult environments affecting the performances of communication systems. Then, we compare the best-known wireless communication systems. The fixed wireless network using Wi-Fi, having the long-range option, is chosen to provide wireless access to rural areas. Moreover, we evaluate the attenuation of the radio signal, since the existing path loss models are generally designed for mobile technologies in urban areas. Then, we design a new path loss empirical model. Several approaches are then proposed by using machine learning to predict the success of wireless links, optimize the choice of access points and establish the validity limits for the pertinent parameters of reliable wireless connections. The proposed solutions are characterized by their accuracy (up to 94% and 8 dB RMSE) and simplicity while considering a wide range of parameters that are difficult to consider all together with conventional solutions. These approaches require reliable data, which is generally difficult to acquire. In our case, the dataset from DIGICOM, a rural Canadian wireless internet service provider, is used

Telecommunication Systems

This book is based on both industrial and academic research efforts in which a number of recent advancements and rare insights into telecommunication systems are well presented. The volume is organized into four parts: "Telecommunication Protocol, Optimization, and Security Frameworks", "Next-Generation Optical Access Technologies", "Convergence of Wireless-Optical Networks" and "Advanced Relay and Antenna Systems for Smart Networks." Chapters within these parts are self-contained and cross-referenced to facilitate further study

Impulse radio ultra wideband over fiber techniques for broadband in-building network applications

In recent years, the demand for high bandwidth and mobility from the end users has been continuously growing. To satisfy this demand, broadband communication technologies that combined the benefit of both wired and wireless are considered as vital solutions. These hybrid optical wireless solutions enable multi-Gbit/s transmission as well as adequate flexibility in terms of mobility. Optical fiber is the ideal medium for such hybrid solution due its signal transparency and wide bandwidth. On the other hand, ultra wideband(UWB) radio over optical fiber technology is considered to be one of the key promising technologies for broadband communication and sensor network applications. The growing interest for UWB is mainly due to its numerous attractive features, such as low power spectral density, tolerance to multipath fading, low probability of interception, coexistence with other wireless services and capability of providing cost-effective > 1 Gb/s transmission. The main idea of UWB over fiber is to deliver UWB radio signals over optical channels, where the optical part serves as a backbone communication infrastructure to carry the UWB signal with a bandwidth of several GHz. This enables multiple novel applications such as: range extension of high speed wireless personal area networks (WPANs), low cost distributed antenna systems, secure and intelligent networks, or delivering broadband services to remote areas. In particular, this thesis deals with novel concepts on shaping and generation of IR-UWB pulses, theoretical and experimental demonstrations over different fiber types, routing of integrated wired/wireless IR-UWB services and effect of fiber types on ranging/localization of IR-UWB-over-fiber systems. Accordingly, this thesis investigates techniques for delivery of high data rate wireless services using impulse radio ultra wideband (IR-UWB) over fiber technology for both access and in-building network applications. To effectively utilize the emission mask imposed for UWB technologies by the Federal Communications Commission(FCC), novel pulse shaping techniques have been investigated and experimentally demonstrated. Comparison of the proposed pulses with conventional ones in terms of the compliance to the FCC-mask requirements, spectral power efficiencies and wireless coverage has been theoretically studied. Simple and efficient optical generation of the new pulse has been experimentally demonstrated. Furthermore, performance evaluation of 2 Gb/s transmission of IR-UWB over different types of fiber such as 25 km silica single-mode, 4.4 km silica multi-mode and 100 m plastic heavily-multi-mode fiber have been performed. To improve the functionalities of in-building networks for the delivery of wireless services; techniques that provide flexibility in terms of dynamic capacity allocation have been investigated. By employing wavelength conversion based on cross-gain modulation in optical semiconductor amplifiers(SOA), routing of three optical channels of IR-UWB over fiber system has been experimentally realized. To reduce the cost of the overall system and share the optical infrastructure, an integrated testbed for wired baseband data and wireless IR-UWB over 1 km SMF-28 fiber has been developed. Accordingly, 1.25 Gb/s wired baseband and 2 Gb/s wireless IR-UWB data have been successfully transmitted over the testbed. Furthermore, to improve the network flexibility, routing of both wired baseband and wireless signals has been demonstrated. Additionally, the ranging and localization capability of IR-UWB over fiber for in-door wireless picocells have been investigated. The effect of different fiber types (4 km SMF, 4.4 km GI-MMF and 100 m PF GI-POF) on the accuracy of the range estimation using time-of-arrival (ToA) ranging technique has been studied. A high accuracy in terms of cm level was achieved due to the combined effect of high bandwidth IR-UWB pulses, short reach fiber and low chromatic dispersion at 1300nm wavelength. Furthermore, ranging/ localization using IR-UWB over fiber system provides additional benefit of centralizing complex processing algorithms, simplifying radio access points, relaxing synchronization requirement, enabling energy-efficient and efficient traffic management networks. All the concepts, design and system experiments presented in this thesis underline the strong potential of IR-UWB for over optical fiber(silica and plastic) techniques for future smart, capacity and energy-efficient broadband in-building network applications

Optimising BFWA networks

EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Optimising BFWA networks

EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Optimising BFWA networks

Broadband Fixed Wireless Access (BFWA) networks are an attractive alternative to cable-based technologies, in offering low-cost, high-speed data services, telephony and video-on-demand to residential and business users. However, in order to compete successfully with available alternative telecommunications solutions, the planning and design of efficient networks is crucial. This thesis presents two tools that enable the planning and evaluation of BFWA networks. AgentOpt is a network design and optimisation tool. A detailed account of the novel scheme, using the principles of emergent, selforganising systems, which AgentOpt employs for finding profit-optimal networks is given. The use of two distinct types of agent entity allows the multi-objective profit/coverage nature of the network planning problem to be satisfied. AgentOpt networks are compared with designs produced by other methods to establish to what extent this decentralised agent approach can optimise BFWA networks. The Network Validation Tool (NVT) analyses the network designs produced by AgentOpt and other automatic cell planning tools (ACPs). This is achieved through simulating the subscription take-up of the potential users in the network. By repetition of this process, statistical data about the various design configurations of the network is produced. This allows a planning engineer to compare and contrast network solutions that may differ in design but perform similarly in terms of expected profit. In this work the NVT is used to formulate some general guidelines about the best-practice use of ACPs