1,762 research outputs found
Bit error performance of diffuse indoor optical wireless channel pulse position modulation system employing artificial neural networks for channel equalisation
The bit-error rate (BER) performance of a pulse position modulation (PPM) scheme for non-line-of-sight indoor optical links employing channel equalisation based on the artificial neural network (ANN) is reported. Channel equalisation is achieved by training a multilayer perceptrons ANN. A comparative study of the unequalised `soft' decision decoding and the `hard' decision decoding along with the neural equalised `soft' decision decoding is presented for different bit resolutions for optical channels with different delay spread. We show that the unequalised `hard' decision decoding performs the worst for all values of normalised delayed spread, becoming impractical beyond a normalised delayed spread of 0.6. However, `soft' decision decoding with/without equalisation displays relatively improved performance for all values of the delay spread. The study shows that for a highly diffuse channel, the signal-to-noise ratio requirement to achieve a BER of 10−5 for the ANN-based equaliser is ~10 dB lower compared with the unequalised `soft' decoding for 16-PPM at a data rate of 155 Mbps. Our results indicate that for all range of delay spread, neural network equalisation is an effective tool of mitigating the inter-symbol interference
Wavelet transform - artificial neural network receiver with adaptive equalisation for a diffuse indoor optical wireless OOK link
This paper presents an alternative approach for signal detection and equalization using the continuous wavelet transform (CWT) and the artificial neural network (ANN) in diffuse indoor optical wireless links (OWL). The wavelet analysis is used for signal preprocessing (feature extraction) and the ANN for signal detection. Traditional receiver architectures based on matched filter (MF) experience significant performance degradation in the presence of artificial light interference (ALI) and multipath induced intersymbol interference (ISI). The proposed receiver structure reduces the effect of ALI and ISI by selecting a particular scale of CWT that corresponds to the desired signal and classifying the signal into binary 1 and 0 based on an observation vector. By selecting particular scales corresponding to the signal, the effect of ALI is reduced. We show that there is little variation when using 30 and 5 neurons in the first layer, with one layer ANN model showing a consistently worse BER performance than other models, whilst the 15 neuron model show some behaviour anomalies from a BER of approximately 10-3. The simulation results show that the Wavelet-ANN architecture outperforms the traditional MF based receiver even with the filter is matched to the ISI affected pulse shape. The Wavelet-ANN receiver is also capable of providing a bit error rate (BER) performance comparable to the equalized forms of traditional receiver structure
Spread spectrum techniques for indoor wireless IR communications
Multipath dispersion and fluorescent light
interference are two major problems in indoor
wireless infrared communications systems. Multipath
dispersion introduces intersymhol interference
at data rates above 10 Mb/s, while
fluorescent light induces severe narrowband
interference to baseband modulation schemes
commonly used such as OOK and PPM. This
article reviews the research into the application
of direct sequence spread spectrum techniques
to ameliorate these key channel impairments
without having to resort to complex signal processing
techniques. The inherent properties of a
spreading sequence are exploited in order to
combat the ISI and narrowband interference. In
addition, to reduce the impact of these impairments,
the DSSS modulation schemes have
strived to be bandwidth-efficient and simple to
implement. Three main DSSS waveform techniques
have been developed and investigated.
These are sequence inverse keying, complementary
sequence inverse keying, and M-ary biorthogonal
keying (MBOK). The operations of
the three systems are explained; their performances
were evaluated through simulations and
experiments for a number of system parameters,
including spreading sequence type and length.
By comparison with OOK, our results show that
SIK, CSIK, and MBOK are effective against
multipath dispersion and fluorescent light interference
becausc the penalties incurred on the
DSSS schemes are between 0-7 dB, while the
penalty on OOK in the same environment is
more than 17 dB. The DSSS solution for IR
wireless transmission demonstrates that a transmission
waveform can he designed to remove
the key channel impairments in a wireless IR
system
Performance of the wavelet-transform-neural network based receiver for DPIM in diffuse indoor optical wireless links in presence of artificial light interference
Artificial neural network (ANN) has application in communication engineering in diverse areas such as channel equalization, channel modeling, error control code because of its capability of nonlinear processing, adaptability, and parallel processing. On the other hand, wavelet transform (WT) with both the time and the frequency resolution provides the exact representation of signal in both domains. Applying these signal processing tools for channel compensation and noise reduction can provide an enhanced performance compared to the traditional tools. In this paper, the slot error rate (SER) performance of digital pulse interval modulation (DPIM) in diffuse indoor optical wireless (OW) links subjected to the artificial light interference (ALI) is reported with new receiver structure based on the discrete WT (DWT) and ANN. Simulation results show that the DWT-ANN based receiver is very effective in reducing the effect of multipath induced inter-symbol interference (ISI) and ALI
Application of Expurgated PPM to Indoor Visible Light Communications - Part I: Single-User Systems
Visible light communications (VLC) in indoor environments suffer from the
limited bandwidth of LEDs as well as from the inter-symbol interference (ISI)
imposed by multipath. In this work, transmission schemes to improve the
performance of indoor optical wireless communication (OWC) systems are
introduced. Expurgated pulse-position modulation (EPPM) is proposed for this
application since it can provide a wide range of peak to average power ratios
(PAPR) needed for dimming of the indoor illumination. A correlation decoder
used at the receiver is shown to be optimal for indoor VLC systems, which are
shot noise and background-light limited. Interleaving applied on EPPM in order
to decrease the ISI effect in dispersive VLC channels can significantly
decrease the error probability. The proposed interleaving technique makes EPPM
a better modulation option compared to PPM for VLC systems or any other
dispersive OWC system. An overlapped EPPM pulse technique is proposed to
increase the transmission rate when bandwidth-limited white LEDs are used as
sources.Comment: Journal of Lightwave Technolog
- …