Automatic visualization and control of arbitrary numerical simulations

Authors’ preprint version as submitted to ECCOMAS Congress 2016, Minisymposium 505 - Interactive Simulations in Computational Engineering. Abstract: Visualization of numerical simulation data has become a cornerstone for many industries and research areas today. There exists a large amount of software support, which is usually tied to specific problem domains or simulation platforms. However, numerical simulations have commonalities in the building blocks of their descriptions (e. g., dimensionality, range constraints, sample frequency). Instead of encoding these descriptions and their meaning into software architecures we propose to base their interpretation and evaluation on a data-centric model. This approach draws much inspiration from work of the IEEE Simulation Interoperability Standards Group as currently applied in distributed (military) training and simulation scenarios and seeks to extend those ideas. By using an extensible self-describing protocol format, simulation users as well as simulation-code providers would be able to express the meaning of their data even if no access to the underlying source code was available or if new and unforseen use cases emerge. A protocol definition will allow simulation-domain experts to describe constraints that can be used for automatically creating appropriate visualizations of simulation data and control interfaces. Potentially, this will enable leveraging innovations on both the simulation and visualization side of the problem continuum. We envision the design and development of algorithms and software tools for the automatic visualization of complex data from numerical simulations executed on a wide variety of platforms (e. g., remote HPC systems, local many-core or GPU-based systems). We also envisage using this automatically gathered information to control (or steer) the simulation while it is running, as well as providing the ability for fine-tuning representational aspects of the visualizations produced

Automatic visualization and control of arbitrary numerical simulations

Authors’ preprint version as submitted to ECCOMAS Congress 2016, Minisymposium 505 - Interactive Simulations in Computational Engineering. Abstract: Visualization of numerical simulation data has become a cornerstone for many industries and research areas today. There exists a large amount of software support, which is usually tied to specific problem domains or simulation platforms. However, numerical simulations have commonalities in the building blocks of their descriptions (e. g., dimensionality, range constraints, sample frequency). Instead of encoding these descriptions and their meaning into software architecures we propose to base their interpretation and evaluation on a data-centric model. This approach draws much inspiration from work of the IEEE Simulation Interoperability Standards Group as currently applied in distributed (military) training and simulation scenarios and seeks to extend those ideas. By using an extensible self-describing protocol format, simulation users as well as simulation-code providers would be able to express the meaning of their data even if no access to the underlying source code was available or if new and unforseen use cases emerge. A protocol definition will allow simulation-domain experts to describe constraints that can be used for automatically creating appropriate visualizations of simulation data and control interfaces. Potentially, this will enable leveraging innovations on both the simulation and visualization side of the problem continuum. We envision the design and development of algorithms and software tools for the automatic visualization of complex data from numerical simulations executed on a wide variety of platforms (e. g., remote HPC systems, local many-core or GPU-based systems). We also envisage using this automatically gathered information to control (or steer) the simulation while it is running, as well as providing the ability for fine-tuning representational aspects of the visualizations produced

Merging LANDSAT Derived Land Covers into Quad-referenced Geographic Information Systems

An approach for merging multiscene LANDSAT data bases into existing geographic information systems having 5-second or smaller cells is described. The approach uses the output from the State of Maryland's UNIVAC 1180-based LANDSAT classification program ASTEP (Algorithm Simulation Test and Evaluation) developed by NASA. The structure of the technique was designed to address the problems that emerged as part of the LANDSAT classification of the 64,000 square mile Chesapeake water shed involving twelve scenes. The removal of overlap among adjacent scenes, the crossreferencing of ground control points, and the isolation of the appropriate pixels from the LANDSAT data base for subsequent positioning into a file containing ancillary data referenced to a specific USGS 7 1/2 minute quadrangle sheet are described. Examples illustrate the clustering of classified LANDSAT pixels to define the dominant land use for each of 8,100 cells within a series of quadrangle sheets distributed over the State of Maryland. The approach uses a hard copy terminal tied to an ASTEP algorithm through telephone lines. A coordinate digitizing board for inputing the position of ground control points is also valuable, although manual measurements are possible. The approach is quite efficient and should be especially attractive for use on regional scale studies

Automatic visualization and control of arbitrary numerical simulations

Authors’ preprint version as submitted to ECCOMAS Congress 2016, Minisymposium 505 - Interactive Simulations in Computational Engineering. Abstract: Visualization of numerical simulation data has become a cornerstone for many industries and research areas today. There exists a large amount of software support, which is usually tied to specific problem domains or simulation platforms. However, numerical simulations have commonalities in the building blocks of their descriptions (e. g., dimensionality, range constraints, sample frequency). Instead of encoding these descriptions and their meaning into software architecures we propose to base their interpretation and evaluation on a data-centric model. This approach draws much inspiration from work of the IEEE Simulation Interoperability Standards Group as currently applied in distributed (military) training and simulation scenarios and seeks to extend those ideas. By using an extensible self-describing protocol format, simulation users as well as simulation-code providers would be able to express the meaning of their data even if no access to the underlying source code was available or if new and unforseen use cases emerge. A protocol definition will allow simulation-domain experts to describe constraints that can be used for automatically creating appropriate visualizations of simulation data and control interfaces. Potentially, this will enable leveraging innovations on both the simulation and visualization side of the problem continuum. We envision the design and development of algorithms and software tools for the automatic visualization of complex data from numerical simulations executed on a wide variety of platforms (e. g., remote HPC systems, local many-core or GPU-based systems). We also envisage using this automatically gathered information to control (or steer) the simulation while it is running, as well as providing the ability for fine-tuning representational aspects of the visualizations produced

Patch-based Hybrid Modelling of Spatially Distributed Systems by Using Stochastic HYPE - ZebraNet as an Example

Individual-based hybrid modelling of spatially distributed systems is usually expensive. Here, we consider a hybrid system in which mobile agents spread over the space and interact with each other when in close proximity. An individual-based model for this system needs to capture the spatial attributes of every agent and monitor the interaction between each pair of them. As a result, the cost of simulating this model grows exponentially as the number of agents increases. For this reason, a patch-based model with more abstraction but better scalability is advantageous. In a patch-based model, instead of representing each agent separately, we model the agents in a patch as an aggregation. This property significantly enhances the scalability of the model. In this paper, we convert an individual-based model for a spatially distributed network system for wild-life monitoring, ZebraNet, to a patch-based stochastic HYPE model with accurate performance evaluation. We show the ease and expressiveness of stochastic HYPE for patch-based modelling of hybrid systems. Moreover, a mean-field analytical model is proposed as the fluid flow approximation of the stochastic HYPE model, which can be used to investigate the average behaviour of the modelled system over an infinite number of simulation runs of the stochastic HYPE model.Comment: In Proceedings QAPL 2014, arXiv:1406.156

Design & Evaluation of Path-based Reputation System for MANET Routing

Most of the existing reputation systems in mobile ad hoc networks (MANET) consider only node reputations when selecting routes. Reputation and trust are therefore generally ensured within a one-hop distance when routing decisions are made, which often fail to provide the most reliable, trusted route. In this report, we first summarize the background studies on the security of MANET. Then, we propose a system that is based on path reputation, which is computed from reputation and trust values of each and every node in the route. The use of path reputation greatly enhances the reliability of resulting routes. The detailed system architecture and components design of the proposed mechanism are carefully described on top of the AODV (Ad-hoc On-demand Distance Vector) routing protocol. We also evaluate the performance of the proposed system by simulating it on top of AODV. Simulation experiments show that the proposed scheme greatly improves network throughput in the midst of misbehavior nodes while requires very limited message overhead. To our knowledge, this is the first path-based reputation system proposal that may be implemented on top of a non-source based routing scheme such as AODV

An agent-based fuzzy cognitive map approach to the strategic marketing planning for industrial firms

This is the post-print version of the final paper published in Industrial Marketing Management. The published article is available from the link below. Changes resulting from the publishing process, such as peer review, editing, corrections, structural formatting, and other quality control mechanisms may not be reflected in this document. Changes may have been made to this work since it was submitted for publication. Copyright @ 2013 Elsevier B.V.Industrial marketing planning is a typical example of an unstructured decision making problem due to the large number of variables to consider and the uncertainty imposed on those variables. Although abundant studies identified barriers and facilitators of effective industrial marketing planning in practice, the literature still lacks practical tools and methods that marketing managers can use for the task. This paper applies fuzzy cognitive maps (FCM) to industrial marketing planning. In particular, agent based inference method is proposed to overcome dynamic relationships, time lags, and reusability issues of FCM evaluation. MACOM simulator also is developed to help marketing managers conduct what-if scenarios to see the impacts of possible changes on the variables defined in an FCM that represents industrial marketing planning problem. The simulator is applied to an industrial marketing planning problem for a global software service company in South Korea. This study has practical implication as it supports marketing managers for industrial marketing planning that has large number of variables and their cause–effect relationships. It also contributes to FCM theory by providing an agent based method for the inference of FCM. Finally, MACOM also provides academics in the industrial marketing management discipline with a tool for developing and pre-verifying a conceptual model based on qualitative knowledge of marketing practitioners.Ministry of Education, Science and Technology (Korea