Bistatic SAR data acquisition and processing using SABRINA-X, with TerraSAR-X as the opportunity transmitter

This thesis investigates the acquisition and processing of Bistatic SAR data using SABRINA-X, and with TerraSAR-X as the transmitter of opportunity. SABRINA-X is an X-band receiver system that has been recently designed at the UPC Remote-Sensing Laboratory, while TerraSARX is a German satellite for SAR-based active remote-sensing. Prior to the particular case of acquiring TerraSAR-X signals, the hardware aspects of SABRINAX have been investigated further, and improved as necessary (or suggested for up-gradation in future). Two successful data acquisitions have been carried out, to obtain bistatic SAR images of the Barcelona harbor, with the receiver set-up at the close-by Montjuïc hill. Each acquisition campaign necessitated an accurate prediction of the satellite overpass time and precise orientation of the antennas to acquire the direct signal from the satellite and the backscattered signals off the viewed terrain. The thesis also investigates the characteristics of the acquired signals, which is critical as regards the subsequent processing for imaging and interferometric applications. The hardware limitations, combined with ‘off-nominal’ transmissions of the satellite, necessitate improved range processing of the acquired signals. The thesis expounds the possible range compression techniques, and suggests ways for improved compression, thereby improving the quality of the subsequently processed images

Bistatic SAR data acquisition and processing using SABRINA-X, with TerraSAR-X as the opportunity transmitter

This thesis investigates the acquisition and processing of Bistatic SAR data using SABRINA-X, and with TerraSAR-X as the transmitter of opportunity. SABRINA-X is an X-band receiver system that has been recently designed at the UPC Remote-Sensing Laboratory, while TerraSARX is a German satellite for SAR-based active remote-sensing. Prior to the particular case of acquiring TerraSAR-X signals, the hardware aspects of SABRINAX have been investigated further, and improved as necessary (or suggested for up-gradation in future). Two successful data acquisitions have been carried out, to obtain bistatic SAR images of the Barcelona harbor, with the receiver set-up at the close-by Montjuïc hill. Each acquisition campaign necessitated an accurate prediction of the satellite overpass time and precise orientation of the antennas to acquire the direct signal from the satellite and the backscattered signals off the viewed terrain. The thesis also investigates the characteristics of the acquired signals, which is critical as regards the subsequent processing for imaging and interferometric applications. The hardware limitations, combined with ‘off-nominal’ transmissions of the satellite, necessitate improved range processing of the acquired signals. The thesis expounds the possible range compression techniques, and suggests ways for improved compression, thereby improving the quality of the subsequently processed images

Imaging Formation Algorithm of the Ground and Space-Borne Hybrid BiSAR Based on Parameters Estimation from Direct Signal

This paper proposes a novel image formation algorithm for the bistatic synthetic aperture radar (BiSAR) with the configuration of a noncooperative transmitter and a stationary receiver in which the traditional imaging algorithm failed because the necessary imaging parameters cannot be estimated from the limited information from the noncooperative data provider. In the new algorithm, the essential parameters for imaging, such as squint angle, Doppler centroid, and Doppler chirp-rate, will be estimated by full exploration of the recorded direct signal (direct signal is the echo from satellite to stationary receiver directly) from the transmitter. The Doppler chirp-rate is retrieved by modeling the peak phase of direct signal as a quadratic polynomial. The Doppler centroid frequency and the squint angle can be derived from the image contrast optimization. Then the range focusing, the range cell migration correction (RCMC), and the azimuth focusing are implemented by secondary range compression (SRC) and the range cell migration, respectively. At last, the proposed algorithm is validated by imaging of the BiSAR experiment configured with china YAOGAN 10 SAR as the transmitter and the receiver platform located on a building at a height of 109 m in Jiangsu province. The experiment image with geometric correction shows good accordance with local Google images

Opportunistic radar imaging using a multichannel receiver

Bistatic Synthetic Aperture Radars have a physically separated transmitter and receiver where one or both are moving. Besides the advantages of reduced procurement and maintenance costs, the receiving system can sense passively while remaining covert which offers obvious tactical advantages. In this work, spaceborne monostatic SARs are used as emitters of opportunity with a stationary ground-based receiver. The imaging mode of SAR systems over land is usually a wide-swath mode such as ScanSAR or TOPSAR in which the antenna scans the area of interest in range to image a larger swath at the expense of degraded cross-range resolution compared to the conventional stripmap mode. In the bistatic geometry considered here, the signals from the sidelobes of the scanning beams illuminating the adjacent sub-swath are exploited to produce images with high cross-range resolution from data obtained from a SAR system operating in wide-swath mode. To achieve this, the SAR inverse problem is rigorously formulated and solved using a Maximum A Posteriori estimation method providing enhanced cross-range resolution compared to that obtained by classical burst-mode SAR processing. This dramatically increases the number of useful images that can be produced using emitters of opportunity. Signals from any radar satellite in the receiving band of the receiver can be used, thus further decreasing the revisit time of the area of interest. As a comparison, a compressive sensing-based method is critically analysed and proves more sensitive to off-grid targets and only suited to sparse scene. The novel SAR imaging method is demonstrated using simulated data and real measurements from C-band satellites such as RADARSAT-2 and ESA’s satellites ERS-2, ENVISAT and Sentinel-1A. In addition, this thesis analyses the main technological issues in bistatic SAR such as the azimuth-variant characteristic of bistatic data and the effect of imperfect synchronisation between the non-cooperative transmitter and the receiver

Utilization of bistatic TanDEM-X data to derive land cover information

Forests have significance as carbon sink in climate change. Therefore, it is of high importance to track land use changes as well as to estimate the state as carbon sink. This is useful for sustainable forest management, land use planning, carbon modelling, and support to implement international initiatives like REDD+ (Reducing Emissions from Deforestation and Degradation). A combination of field measurements and remote sensing seems most suitable to monitor forests. Radar sensors are considered as high potential due to the weather and daytime independence. TanDEM-X is a interferometric SAR (synthetic aperture radar) mission in space and can be used for land use monitoring as well as estimation of biophysical parameters. TanDEM-X is a X-band system resulting in low penetration depth into the forest canopy. Interferometric information can be useful, whereas the low penetration can be considered as an advantage. The interferometric height is assumable as canopy height, which is correlated with forest biomass. Furthermore, the interferometric coherence is mainly governed by volume decorrelation, whereas temporal decorrelation is minimized. This information can be valuable for quantitative estimations and land use monitoring. The interferometric coherence improved results in comparison to land use classifications without coherence of about 10% (75% vs. 85%). Especially the differentiation between forest classes profited from coherence. The coherence correlated with aboveground biomass in a R² of about 0.5 and resulted in a root mean square error (RSME) of 14%. The interferometric height achieved an even higher correlation with the biomass (R²=0.68) resulting in cross-validated RMSE of 7.5%. These results indicated that TanDEM-X can be considered as valuable and consistent data source for forest monitoring. Especially interferometric information seemed suitable for biomass estimation

Coherent change detection with GNSS-based SAR -Experimental study-

Bistatic Synthetic Aperture Radar (BSAR) systems are under an increasing amount of research activity over the last years. The possibility of the use of transmitters of opportunity has increased the flexibility and the applications of radar systems. One of the options is the use of Global Navigation Satellite Systems (GNSS) as transmitters, such as GPS, GLONASS or the forthcoming Galileo and Beidou, that is used in this study. This thesis is the result of the study of a GNSS-based SAR used for detection of changes that may occur in a scene. Although passive SAR is outclassed by active SAR in terms of SAR imaging performance, Coherent Change Detection applications in passive SAR can be promising. A proof-of-concept study is presented in this thesis. The connection between spatial target change and the level of coherence before and after the change is investigated. The stages of theoretical analysis and experimental setup are described in detail. Simulated scenarios are presented and the experimental results are analysed

Sea target detection using spaceborne GNSS-R delay-doppler maps: theory and experimental proof of concept using TDS-1 data

© 2017 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.This study addresses a novel application of global navigation satellite system-reflectometry (GNSS-R) delay-Doppler maps (DDMs), namely sea target detection. In contrast with other competing remote sensing technologies, such as synthetic aperture radar and optical systems, typically exploited in the field of sea target detection, GNSS-R systems could be employed as satellite constellations, so as to fulfill the temporal requirements for near real-time ships and sea ice sheets monitoring. In this study, the revisit time offered by GNSS-R systems is quantitatively evaluated by means of a simulation analysis, in which three different realistic GNSS-R missions are simulated and analyzed. Then, a sea target detection algorithm from spaceborne GNSS-R DDMs is described and assessed. The algorithm is based on a sea clutter compensation step and uses an adaptive threshold to take into account spatial variations in the sea background and/or noise statistics. Finally, the sea target detector algorithm is tested and validated for the first time ever using experimental GNSS-R data from the U.K. TechDemoSat-1 dataset. Performance is assessed by providing the receiver operating characteristic curves, and some preliminary experimental results are presented.Peer ReviewedPostprint (published version