On the Derivation of Optimal Partial Successive Interference Cancellation

The necessity of accurate channel estimation for Successive and Parallel Interference Cancellation is well known. Iterative channel estimation and channel decoding (for instance by means of the Expectation-Maximization algorithm) is particularly important for these multiuser detection schemes in the presence of time varying channels, where a high density of pilots is necessary to track the channel. This paper designs a method to analytically derive a weighting factor $\alpha$, necessary to improve the efficiency of interference cancellation in the presence of poor channel estimates. Moreover, this weighting factor effectively mitigates the presence of incorrect decisions at the output of the channel decoder. The analysis provides insight into the properties of such interference cancellation scheme and the proposed approach significantly increases the effectiveness of Successive Interference Cancellation under the presence of channel estimation errors, which leads to gains of up to 3 dB.Comment: IEEE GLOBECOM 201

Spectrally Modulated Spectrally Encoded Framework Based Cognitive Radio in Mobile Environment

Radio spectrum has become a precious resource, and it has long been the dream of wireless communication engineers to maximize the utilization of the radio spectrum. Dynamic Spectrum Access (DSA) and Cognitive Radio (CR) have been considered promising to enhance the efficiency and utilization of the spectrum. Since some of the spectrum bands are occupied by primary users (PUs), the available spectrum for secondary users (SUs) are non-contiguous, and multi-carrier transmission technologies become the natural solution to occupy those non-contiguous bands. Non-contiguous multi-carrier based modulations, such as NC-OFDM (non-contiguous Orthogonal Frequency Division Multiplexing), NC-MC-CDMA (non-contiguous multi-carrier code division multiple access) and NC-SC-OFDM (non-contiguous single carrier OFDM), allow the SUs to utilize the available spectrum. Spectrally Modulated Spectrally Encoded (SMSE) framework offers a general framework to generate multi-carrier based waveform for CR. However, it is well known that all multi-carrier transmission technologies suffer significant performance degradation resulting from inter-carrier interference (ICI) in high mobility environments. Current research work in cognitive radio has not sufficiently considered and addressed this issue yet. Hence, it is highly desired to study the effect of mobility on CR communication systems and how to improve the performance through affordable low-complexity signal processing techniques. In this dissertation, we analyze the inter-carrier interference for SMSE based multi-carrier transmissions in CR, and propose multiple ICI mitigation techniques and carrier frequency offset (CFO) estimator. Specifically, (1) an ICI self-cancellation algorithm is adapted to the MC-CDMA system by designing new spreading codes to enable the system with the capability to reduce the ICI; (2) a blind ICI cancellation technique named Total ICI Cancellation is proposed to perfectly remove the ICI effect for OFDM and MC-CDMA systems and provide the performance approximately identical to that of the systems without ICI; (3) a novel modulation scheme, called Magnitude Keyed Modulation (MKM), is proposed to combine with SC-OFDM system and provide ICI immunity feature so that the system performance is not affected by the mobility or carrier frequency offset; (4) a blind carrier frequency offset estimation algorithm is proposed to accurately estimate the CFO; (5) finally, compared to traditional ICI analysis and cancellation techniques with assumption of constant carrier frequency offset among all the subcarriers, subcarrier varying CFO scenario is considered for the wideband multi-carrier transmission and non-contiguous multi-carrier transmission for CR, and an ICI total cancellation algorithm is proposed for the multi-carrier system with subcarrier varying CFOs to entirely remove the ICI

Spectrally Modulated Spectrally Encoded Framework Based Cognitive Radio in Mobile Environment

Radio spectrum has become a precious resource, and it has long been the dream of wireless communication engineers to maximize the utilization of the radio spectrum. Dynamic Spectrum Access (DSA) and Cognitive Radio (CR) have been considered promising to enhance the efficiency and utilization of the spectrum. Since some of the spectrum bands are occupied by primary users (PUs), the available spectrum for secondary users (SUs) are non-contiguous, and multi-carrier transmission technologies become the natural solution to occupy those non-contiguous bands. Non-contiguous multi-carrier based modulations, such as NC-OFDM (non-contiguous Orthogonal Frequency Division Multiplexing), NC-MC-CDMA (non-contiguous multi-carrier code division multiple access) and NC-SC-OFDM (non-contiguous single carrier OFDM), allow the SUs to utilize the available spectrum. Spectrally Modulated Spectrally Encoded (SMSE) framework offers a general framework to generate multi-carrier based waveform for CR. However, it is well known that all multi-carrier transmission technologies suffer significant performance degradation resulting from inter-carrier interference (ICI) in high mobility environments. Current research work in cognitive radio has not sufficiently considered and addressed this issue yet. Hence, it is highly desired to study the effect of mobility on CR communication systems and how to improve the performance through affordable low-complexity signal processing techniques. In this dissertation, we analyze the inter-carrier interference for SMSE based multi-carrier transmissions in CR, and propose multiple ICI mitigation techniques and carrier frequency offset (CFO) estimator. Specifically, (1) an ICI self-cancellation algorithm is adapted to the MC-CDMA system by designing new spreading codes to enable the system with the capability to reduce the ICI; (2) a blind ICI cancellation technique named Total ICI Cancellation is proposed to perfectly remove the ICI effect for OFDM and MC-CDMA systems and provide the performance approximately identical to that of the systems without ICI; (3) a novel modulation scheme, called Magnitude Keyed Modulation (MKM), is proposed to combine with SC-OFDM system and provide ICI immunity feature so that the system performance is not affected by the mobility or carrier frequency offset; (4) a blind carrier frequency offset estimation algorithm is proposed to accurately estimate the CFO; (5) finally, compared to traditional ICI analysis and cancellation techniques with assumption of constant carrier frequency offset among all the subcarriers, subcarrier varying CFO scenario is considered for the wideband multi-carrier transmission and non-contiguous multi-carrier transmission for CR, and an ICI total cancellation algorithm is proposed for the multi-carrier system with subcarrier varying CFOs to entirely remove the ICI

Real-time digital signal processing for new wavelength-to-the-user optical access networks

Nowadays, optical access networks provide high capacity to end users with growing availability of multimedia contents that can be streamed to fixed or mobile devices. In this regard, one of the most flexible and low-cost approaches is Passive Optical Network (PON) that is used in Fiber-to-the-Home (FTTH). Due to the growing of the bandwidth demands, Wavelength Division Multiplexing (WDM), and later on ultra-dense WDM (udWDM) PON, with a narrow channel spacing, to increase the number of users through a single fiber, has been deployed. The udWDM-PON with coherent technology is an attractive solution for the next generation optical access networks with advanced digital signal processing (DSP). Thanks to the higher sensitivity and improved channel selectivity in coherent detection with efficient DSP, optical networks support larger number of users in longer distances. Since the cost is the main concern in the optical access networks, this thesis presents DSP architectures in coherent receiver (Rx), based on low-cost direct phase modulated commercial DFB lasers. The proposals are completely in agreement with consept of wavelength-to-the-user, where each client in optical network is dedicated to an individual wavelength. Next, in a 6.25 GHz spaced udWDM grid with the optimized DSP techniques and phase-shift-keying (PSK) modulation format, the high sensitivity is achieved in real-time field-programmable-gate-array (FPGA) implementations. Moreover, this thesis reduces hardware complexity of optical carrier recovery (CR) with two various strategies. First, based on differential mth-power frequency estimator (FE) by using look-up-tables (LUTs) and second, LUT-free CR architecture, with optimizing the power consumption and hardware resources, as well as improving the channel selectivity in terms of speed and robustness. Furthermore, by designing very simple but efficient clock recovery, a symbol-rate DSP architecture, which process data using only one sample per symbol (1-sps), for polarization diversity (POD) structure, becomes possible. It makes the DSP independent from state-of-polarization (SOP), even in the case of low-cost optical front-end and low-speed analog-to-digital converters (ADCs), keeps the performance high as well as sensitivity in real-time implementations on FPGA.Avui en dia, les xarxes d'accés òptic proporcionen una alta capacitat als usuaris finals amb una creixent disponibilitat de continguts multimèdia que es poden transmetre a dispositius fixos o mòbils. En aquest sentit, un dels enfocaments més flexibles i de baix cost és la Xarxa Òptica Passiva (PON) que s'utilitza a Fibra-fins-la-Llar (FTTH). A causa del creixent requeriment de l'ample de banda, s'ha desplegat la multiplexació de divisió d'ona (WDM) i, posteriorment, el PON amb WDM d'alta densitat (udWDM), amb un espaiat estret de canals, per augmentar el nombre d'usuaris a través d'una sola fibra. L'udWDM-PON amb tecnologia coherent és una solució atractiva per a les xarxes d'accés òptic d'última generació amb processament avançat de senyal digital (DSP). Gràcies a la major sensibilitat i a la selectivitat millorada del canal en la detecció coherent amb DSP eficient, les xarxes òptiques suporten un nombre més gran d'usuaris a distàncies més llargues. Atès que el cost és la principal preocupació en les xarxes d'accés òptic, aquesta tesi presenta arquitectures DSP en receptor coherent (Rx), basades en làsers DFB comercials modulats en fase directa de baix cost. Les propostes estan d'acord amb la asignació de la longitud d'ona a l'usuari, on a cada client de la xarxa òptica se li dedica a una longitud d'ona individual. A continuació, en una graella udWDM espaciada de 6,25 GHz amb les tècniques de DSP optimitzades i el format de modulació de fase (PSK), s'aconsegueix l'alta sensibilitat en implementacions field-programable-gate-array (FPGA) en temps real. A més, aquesta tesi redueix la complexitat del maquinari de recuperació òptica de portadors (CR) amb dues estratègies diverses. Primer, basat en un estimador de freqüència de potència diferencial (FE) mitjançant l'ús de taules de cerca (LUTs) i, en segon lloc, l'arquitectura CR sense LUT, amb l'optimització del consum d'energia i els recursos de maquinari, a més de millorar la selectivitat del canal en termes de velocitat i robustesa. A més, al dissenyar una recuperació de rellotge molt simple, però eficaç, es fa possible una arquitectura DSP a la velocitat dels símbols, que processa dades utilitzant només una mostra per símbol (1-sps) per a l'estructura de la diversitat de polarització òptica (POD). Fa que el DSP sigui independent de l'estat de polarització (SOP), fins i tot en el cas dels analog-to-digital converters (ADC) de front-end òptics de baix cost, i manté el rendiment alt i la sensibilitat en les implementacions en temps real de FPGA.Postprint (published version

Engineering evaluations and studies. Volume 3: Exhibit C

High rate multiplexes asymmetry and jitter, data-dependent amplitude variations, and transition density are discussed

Real-time digital signal processing for new wavelength-to-the-user optical access networks

Nowadays, optical access networks provide high capacity to end users with growing availability of multimedia contents that can be streamed to fixed or mobile devices. In this regard, one of the most flexible and low-cost approaches is Passive Optical Network (PON) that is used in Fiber-to-the-Home (FTTH). Due to the growing of the bandwidth demands, Wavelength Division Multiplexing (WDM), and later on ultra-dense WDM (udWDM) PON, with a narrow channel spacing, to increase the number of users through a single fiber, has been deployed. The udWDM-PON with coherent technology is an attractive solution for the next generation optical access networks with advanced digital signal processing (DSP). Thanks to the higher sensitivity and improved channel selectivity in coherent detection with efficient DSP, optical networks support larger number of users in longer distances. Since the cost is the main concern in the optical access networks, this thesis presents DSP architectures in coherent receiver (Rx), based on low-cost direct phase modulated commercial DFB lasers. The proposals are completely in agreement with consept of wavelength-to-the-user, where each client in optical network is dedicated to an individual wavelength. Next, in a 6.25 GHz spaced udWDM grid with the optimized DSP techniques and phase-shift-keying (PSK) modulation format, the high sensitivity is achieved in real-time field-programmable-gate-array (FPGA) implementations. Moreover, this thesis reduces hardware complexity of optical carrier recovery (CR) with two various strategies. First, based on differential mth-power frequency estimator (FE) by using look-up-tables (LUTs) and second, LUT-free CR architecture, with optimizing the power consumption and hardware resources, as well as improving the channel selectivity in terms of speed and robustness. Furthermore, by designing very simple but efficient clock recovery, a symbol-rate DSP architecture, which process data using only one sample per symbol (1-sps), for polarization diversity (POD) structure, becomes possible. It makes the DSP independent from state-of-polarization (SOP), even in the case of low-cost optical front-end and low-speed analog-to-digital converters (ADCs), keeps the performance high as well as sensitivity in real-time implementations on FPGA.Avui en dia, les xarxes d'accés òptic proporcionen una alta capacitat als usuaris finals amb una creixent disponibilitat de continguts multimèdia que es poden transmetre a dispositius fixos o mòbils. En aquest sentit, un dels enfocaments més flexibles i de baix cost és la Xarxa Òptica Passiva (PON) que s'utilitza a Fibra-fins-la-Llar (FTTH). A causa del creixent requeriment de l'ample de banda, s'ha desplegat la multiplexació de divisió d'ona (WDM) i, posteriorment, el PON amb WDM d'alta densitat (udWDM), amb un espaiat estret de canals, per augmentar el nombre d'usuaris a través d'una sola fibra. L'udWDM-PON amb tecnologia coherent és una solució atractiva per a les xarxes d'accés òptic d'última generació amb processament avançat de senyal digital (DSP). Gràcies a la major sensibilitat i a la selectivitat millorada del canal en la detecció coherent amb DSP eficient, les xarxes òptiques suporten un nombre més gran d'usuaris a distàncies més llargues. Atès que el cost és la principal preocupació en les xarxes d'accés òptic, aquesta tesi presenta arquitectures DSP en receptor coherent (Rx), basades en làsers DFB comercials modulats en fase directa de baix cost. Les propostes estan d'acord amb la asignació de la longitud d'ona a l'usuari, on a cada client de la xarxa òptica se li dedica a una longitud d'ona individual. A continuació, en una graella udWDM espaciada de 6,25 GHz amb les tècniques de DSP optimitzades i el format de modulació de fase (PSK), s'aconsegueix l'alta sensibilitat en implementacions field-programable-gate-array (FPGA) en temps real. A més, aquesta tesi redueix la complexitat del maquinari de recuperació òptica de portadors (CR) amb dues estratègies diverses. Primer, basat en un estimador de freqüència de potència diferencial (FE) mitjançant l'ús de taules de cerca (LUTs) i, en segon lloc, l'arquitectura CR sense LUT, amb l'optimització del consum d'energia i els recursos de maquinari, a més de millorar la selectivitat del canal en termes de velocitat i robustesa. A més, al dissenyar una recuperació de rellotge molt simple, però eficaç, es fa possible una arquitectura DSP a la velocitat dels símbols, que processa dades utilitzant només una mostra per símbol (1-sps) per a l'estructura de la diversitat de polarització òptica (POD). Fa que el DSP sigui independent de l'estat de polarització (SOP), fins i tot en el cas dels analog-to-digital converters (ADC) de front-end òptics de baix cost, i manté el rendiment alt i la sensibilitat en les implementacions en temps real de FPGA

Analysis and design of metal-surface mounted radio frequency identification (RFID) transponders

With the development of the radio frequency integrated circuit (RFIC), contactless radio frequency identification (RFID) technology, as one of the fastest growing sectors of automatic identification procedures (Auto-ID), gains broad application in tracking assets in supply chain management. However, one of the largest challenges for the RFID industry is that the ultra high frequency (UHF) RFID transponder doesn\u27t function well when it is applied to any conductive surface. In this dissertation, the communication principle of wireless transceivers is illustrated. As one fast-growing application field of wireless communication, the distinct operating principle of the RFID is clarified. The factors that limit the reading/writing distance of UHF RFID transponders are discussed in detail. Some potential solutions are proposed and verified. One nondestructive solution is to apply a metamaterial such as a frequency selective surface (FSS) or a mushroom-like electromagnetic bandgap (EBG) surface to block the transmission of electromagnetic waves from the RFID antenna to the metal ground and thus boost the antenna radiation efficiency. For this solution, a new design approach suppressing the TM wave but supporting the TE wave is demonstrated. Another low-cost solution is to use an inexpensive substrate material and obtain the most power-efficient antenna structure. More than six potentially patentable planar RFID transponder antennas were invented, designed and tested. Their compact size, low profile, low cost and superior performance paves the way for the RFID industry to expand their market share in the near future