Generating Information-Diverse Microwave Speckle Patterns Inside a Room at a Single Frequency With a Dynamic Metasurface Aperture

We demonstrate that dynamic metasurface apertures (DMAs) are capable of generating a multitude of highly uncorrelated speckle patterns in a typical residential environment at a single frequency. We use a DMA implemented as an electrically-large cavity excited by a single port and loaded with many individually-addressable tunable metamaterial radiators. We placed such a DMA in one corner of a plywood-walled L-shape room transmitting microwave signals at 19 GHz as we changed the tuning states of the metamaterial radiators. In another corner, in the non-line-of-sight of the DMA, we conducted a scan of the field generated by the DMA. For comparison, we also performed a similar test where the DMA was replaced by a simple dipole antenna with fixed pattern but generating a signal that spanned 19-24 GHz. Using singular value decomposition of the scanned data, we demonstrate that the DMA can generate a multitude of highly uncorrelated speckle patterns at a single frequency. In contrast, a dipole antenna with a fixed pattern can only generate such a highly uncorrelated set of patterns when operating over a large bandwidth. The experimental results of this paper suggest that DMAs can be used to capture a diversity of information at a single frequency which can be used for single frequency computational imaging systems, NLOS motion detection, gesture recognition systems, and more

Holographic MIMO Communications: Theoretical Foundations, Enabling Technologies, and Future Directions

Future wireless systems are envisioned to create an endogenously holography-capable, intelligent, and programmable radio propagation environment, that will offer unprecedented capabilities for high spectral and energy efficiency, low latency, and massive connectivity. A potential and promising technology for supporting the expected extreme requirements of the sixth-generation (6G) communication systems is the concept of the holographic multiple-input multiple-output (HMIMO), which will actualize holographic radios with reasonable power consumption and fabrication cost. The HMIMO is facilitated by ultra-thin, extremely large, and nearly continuous surfaces that incorporate reconfigurable and sub-wavelength-spaced antennas and/or metamaterials. Such surfaces comprising dense electromagnetic (EM) excited elements are capable of recording and manipulating impinging fields with utmost flexibility and precision, as well as with reduced cost and power consumption, thereby shaping arbitrary-intended EM waves with high energy efficiency. The powerful EM processing capability of HMIMO opens up the possibility of wireless communications of holographic imaging level, paving the way for signal processing techniques realized in the EM-domain, possibly in conjunction with their digital-domain counterparts. However, in spite of the significant potential, the studies on HMIMO communications are still at an initial stage, its fundamental limits remain to be unveiled, and a certain number of critical technical challenges need to be addressed. In this survey, we present a comprehensive overview of the latest advances in the HMIMO communications paradigm, with a special focus on their physical aspects, their theoretical foundations, as well as the enabling technologies for HMIMO systems. We also compare the HMIMO with existing multi-antenna technologies, especially the massive MIMO, present various...Comment: double column, 58 page

Review : Deep learning in electron microscopy

Deep learning is transforming most areas of science and technology, including electron microscopy. This review paper offers a practical perspective aimed at developers with limited familiarity. For context, we review popular applications of deep learning in electron microscopy. Following, we discuss hardware and software needed to get started with deep learning and interface with electron microscopes. We then review neural network components, popular architectures, and their optimization. Finally, we discuss future directions of deep learning in electron microscopy

On the use of deep learning for phase recovery

Phase recovery (PR) refers to calculating the phase of the light field from its intensity measurements. As exemplified from quantitative phase imaging and coherent diffraction imaging to adaptive optics, PR is essential for reconstructing the refractive index distribution or topography of an object and correcting the aberration of an imaging system. In recent years, deep learning (DL), often implemented through deep neural networks, has provided unprecedented support for computational imaging, leading to more efficient solutions for various PR problems. In this review, we first briefly introduce conventional methods for PR. Then, we review how DL provides support for PR from the following three stages, namely, pre-processing, in-processing, and post-processing. We also review how DL is used in phase image processing. Finally, we summarize the work in DL for PR and outlook on how to better use DL to improve the reliability and efficiency in PR. Furthermore, we present a live-updating resource (https://github.com/kqwang/phase-recovery) for readers to learn more about PR.Comment: 82 pages, 32 figure

Broadband dual-comb hyperspectral imaging and adaptable spectroscopy with programmable frequency combs

We explore the advantages of a free-form dual-comb spectroscopy (DCS) platform based on time-programmable frequency combs for real-time, penalty-free apodized scanning. In traditional DCS, the fundamental spectral resolution, which equals the comb repetition rate, can be excessively fine for many applications. While the fine resolution is not itself problematic, it comes with the penalty of excess acquisition time. Post-processing apodization (windowing) can be applied to tailor the resolution to the sample, but only with a deadtime penalty proportional to the degree of apodization. The excess acquisition time remains. With free-form DCS, this deadtime is avoided by programming a real-time apodization pattern that dynamically reverses the pulse periods between the dual frequency combs. In this way, one can tailor the spectrometer's resolution and update rate to different applications without penalty. We show operation of a free-form DCS system where the spectral resolution is varied from the intrinsic fine resolution of 160 MHz up to 822 GHz by applying tailored real-time apodization. Because there is no deadtime penalty, the spectral signal-to-noise ratio increases linearly with resolution by 5000x over this range, as opposed to the square root increase observed for postprocessing apodization in traditional DCS. We explore the flexibility to change resolution and update rate to perform hyperspectral imaging at slow camera frame rates, where the penalty-free apodization allows for optimal use of each frame. We obtain dual-comb hyperspectral movies at a 20 Hz spectrum update rate with broad optical spectral coverage of over 10 THz

Distributed Compressive Sensing Algorithm for Photoacoustic Tomography

Biomedical imaging techniques are playing an essential role in diagnosing different kinds of diseases, which always motivates the search for improving their sensitivity and accuracy. Photoacoustic Tomography (PAT) is one of the most powerful techniques. PAT has many advantages as it is less expensive and faster than Magnetic Resonance Imaging (MRI). It combines the advantages of optical imaging and ultrasound imaging as it provides high contrast, high penetration, and high-resolution images for biological tissues. Also, it uses non-ionizing radiation which is very safe for human health. The main challenge in PAT is that human tissues can be exposed only to a limited amount of radiation, so a full-view of PAT requires many transducers and a great number of measurements. This thesis aims to develop an efficient reconstruction algorithm of Photoacoustic (PA) images that uses a few number of transducers, a few number of measurements, and offers low computational complexity while maintaining a high quality of recovered images. The proposed reconstruction algorithm depends on the Compressive Sensing (CS) theory which is a signal processing technique that is capable of forming a full view PAT images (under certain prerequisites) with a few number of measurements. The proposed algorithm solves the CS problem using a distributed and parallel implementation of the Alternating Direction Method of Multipliers (ADMM). ADMM is a well-known method for solving convex optimization problems. A group of local processors that work in parallel with one global processor is used to form the images. The iterative algorithm of ADMM is distributed over local processors in such a way perfect reconstruction of images is possible. Simulation results show that the proposed algorithm is powerful and successful in reconstructing different kinds of PA images with very high quality and significantly reduced computational complexity. Reducing the computational complexity is reflected in a much lower reconstruction time. Also, the algorithm requires lower cost and shorter acquisition time since the CS theory is used which allows the recovery of images from a few number of samples and sensors. Although the idea of distributed ADMM has been introduced before in literature but to the best of our knowledge, this is the first work to apply distributed ADMM method in recovering photoacoustic images by distributing the iterative algorithm among multiple processors working in parallel

Generating Information-Diverse Microwave Speckle Patterns Inside a Room at a Single Frequency With a Dynamic Metasurface Aperture

We demonstrate that dynamic metasurface apertures (DMAs) are capable of generating a multitude of highly uncorrelated speckle patterns in a typical residential environment at a single frequency. We use a DMA implemented as an electrically-large cavity excited by a single port and loaded with many individually-addressable tunable metamaterial radiators. We placed such a DMA in one corner of a plywood-walled L-shape room transmitting microwave signals at 19 GHz as we changed the tuning states of the metamaterial radiators. In another corner, in the non-line-of-sight of the DMA, we conducted a scan of the field generated by the DMA. For comparison, we also performed a similar test where the DMA was replaced by a simple dipole antenna with fixed pattern but generating a signal that spanned 19-24 GHz. Using singular value decomposition of the scanned data, we demonstrate that the DMA can generate a multitude of highly uncorrelated speckle patterns at a single frequency. In contrast, a dipole antenna with a fixed pattern can only generate such a highly uncorrelated set of patterns when operating over a large bandwidth. The experimental results of this paper suggest that DMAs can be used to capture a diversity of information at a single frequency which can be used for single frequency computational imaging systems, NLOS motion detection, gesture recognition systems, and more

Parallelisation of greedy algorithms for compressive sensing reconstruction

Compressive Sensing (CS) is a technique which allows a signal to be compressed at the same time as it is captured. The process of capturing and simultaneously compressing the signal is represented as linear sampling, which can encompass a variety of physical processes or signal processing. Instead of explicitly identifying redundancies in the source signal, CS relies on the property of sparsity in order to reconstruct the compressed signal. While linear sampling is much less burdensome than conventional compression, this is more than made up for by the high computational cost of reconstructing a signal which has been captured using CS. Even when using some of the fastest reconstruction techniques, known as greedy pursuits, reconstruction of large problems can pose a significant burden, consuming a great deal of memory as well as compute time. Parallel computing is the foundation of the field of High Performance Computing (HPC). Modern supercomputers are generally composed of large clusters of standard servers, with a dedicated low-latency high-bandwidth interconnect network. On such a cluster, an appropriately written program can harness vast quantities of memory and computational power. However, in order to exploit a parallel compute resource, an algorithm usually has to be redesigned from the ground up. In this thesis I describe the development of parallel variants of two algorithms commonly used in CS reconstruction, Matching Pursuit (MP) and Orthogonal Matching Pursuit (OMP), resulting in the new distributed compute algorithms DistMP and DistOMP. I present the results from experiments showing how DistMP and DistOMP can utilise a compute cluster to solve CS problems much more quickly than a single computer could alone. Speed-up of as much as a factor of 76 is observed with DistMP when utilising 210 workers across 14 servers, compared to a single worker. Finally, I demonstrate how DistOMP can solve a problem with a 429GB equivalent sampling matrix in as little as 62 minutes using a 16-node compute cluster.Funded by an ICASE award from the Engineering and Physical Sciences Research Council, with sponsorship provided by Thales Research and Technology