2,423 research outputs found

    Cache Equalizer: A Cache Pressure Aware Block Placement Scheme for Large-Scale Chip Multiprocessors

    Get PDF
    This paper describes Cache Equalizer (CE), a novel distributed cache management scheme for large scale chip multiprocessors (CMPs). Our work is motivated by large asymmetry in cache sets usages. CE decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Temporal pressure at the on-chip last-level cache, is continuously collected at a group (comprised of cache sets) granularity, and periodically recorded at the memory controller to guide the placement process. An incoming block is consequently placed at a cache group that exhibits the minimum pressure. CE provides Quality of Service (QoS) by robustly offering better performance than the baseline shared NUCA cache. Simulation results using a full-system simulator demonstrate that CE outperforms shared NUCA caches by an average of 15.5% and by as much as 28.5% for the benchmark programs we examined. Furthermore, evaluations manifested the outperformance of CE versus related CMP cache designs

    Adaptive memory hierarchies for next generation tiled microarchitectures

    Get PDF
    Les últimes dècades el rendiment dels processadors i de les memòries ha millorat a diferent ritme, limitant el rendiment dels processadors i creant el conegut memory gap. Sol·lucionar aquesta diferència de rendiment és un camp d'investigació d'actualitat i que requereix de noves sol·lucions. Una sol·lució a aquest problema són les memòries “cache”, que permeten reduïr l'impacte d'unes latències de memòria creixents i que conformen la jerarquia de memòria. La majoria de d'organitzacions de les “caches” estan dissenyades per a uniprocessadors o multiprcessadors tradicionals. Avui en dia, però, el creixent nombre de transistors disponible per xip ha permès l'aparició de xips multiprocessador (CMPs). Aquests xips tenen diferents propietats i limitacions i per tant requereixen de jerarquies de memòria específiques per tal de gestionar eficientment els recursos disponibles. En aquesta tesi ens hem centrat en millorar el rendiment i la eficiència energètica de la jerarquia de memòria per CMPs, des de les “caches” fins als controladors de memòria. A la primera part d'aquesta tesi, s'han estudiat organitzacions tradicionals per les “caches” com les privades o compartides i s'ha pogut constatar que, tot i que funcionen bé per a algunes aplicacions, un sistema que s'ajustés dinàmicament seria més eficient. Tècniques com el Cooperative Caching (CC) combinen els avantatges de les dues tècniques però requereixen un mecanisme centralitzat de coherència que té un consum energètic molt elevat. És per això que en aquesta tesi es proposa el Distributed Cooperative Caching (DCC), un mecanisme que proporciona coherència en CMPs i aplica el concepte del cooperative caching de forma distribuïda. Mitjançant l'ús de directoris distribuïts s'obté una sol·lució més escalable i que, a més, disposa d'un mecanisme de marcatge més flexible i eficient energèticament. A la segona part, es demostra que les aplicacions fan diferents usos de la “cache” i que si es realitza una distribució de recursos eficient es poden aprofitar els que estan infrautilitzats. Es proposa l'Elastic Cooperative Caching (ElasticCC), una organització capaç de redistribuïr la memòria “cache” dinàmicament segons els requeriments de cada aplicació. Una de les contribucions més importants d'aquesta tècnica és que la reconfiguració es decideix completament a través del maquinari i que tots els mecanismes utilitzats es basen en estructures distribuïdes, permetent una millor escalabilitat. ElasticCC no només és capaç de reparticionar les “caches” segons els requeriments de cada aplicació, sinó que, a més a més, és capaç d'adaptar-se a les diferents fases d'execució de cada una d'elles. La nostra avaluació també demostra que la reconfiguració dinàmica de l'ElasticCC és tant eficient que gairebé proporciona la mateixa taxa de fallades que una configuració amb el doble de memòria.Finalment, la tesi es centra en l'estudi del comportament de les memòries DRAM i els seus controladors en els CMPs. Es demostra que, tot i que els controladors tradicionals funcionen eficientment per uniprocessadors, en CMPs els diferents patrons d'accés obliguen a repensar com estan dissenyats aquests sistemes. S'han presentat múltiples sol·lucions per CMPs però totes elles es veuen limitades per un compromís entre el rendiment global i l'equitat en l'assignació de recursos. En aquesta tesi es proposen els Thread Row Buffers (TRBs), una zona d'emmagatenament extra a les memòries DRAM que permetria guardar files de dades específiques per a cada aplicació. Aquest mecanisme permet proporcionar un accés equitatiu a la memòria sense perjudicar el seu rendiment global. En resum, en aquesta tesi es presenten noves organitzacions per la jerarquia de memòria dels CMPs centrades en la escalabilitat i adaptativitat als requeriments de les aplicacions. Els resultats presentats demostren que les tècniques proposades proporcionen un millor rendiment i eficiència energètica que les millors tècniques existents fins a l'actualitat.Processor performance and memory performance have improved at different rates during the last decades, limiting processor performance and creating the well known "memory gap". Solving this performance difference is an important research field and new solutions must be proposed in order to have better processors in the future. Several solutions exist, such as caches, that reduce the impact of longer memory accesses and conform the system memory hierarchy. However, most of the existing memory hierarchy organizations were designed for single processors or traditional multiprocessors. Nowadays, the increasing number of available transistors has allowed the apparition of chip multiprocessors, which have different constraints and require new ad-hoc memory systems able to efficiently manage memory resources. Therefore, in this thesis we have focused on improving the performance and energy efficiency of the memory hierarchy of chip multiprocessors, ranging from caches to DRAM memories. In the first part of this thesis we have studied traditional cache organizations such as shared or private caches and we have seen that they behave well only for some applications and that an adaptive system would be desirable. State-of-the-art techniques such as Cooperative Caching (CC) take advantage of the benefits of both worlds. This technique, however, requires the usage of a centralized coherence structure and has a high energy consumption. Therefore we propose the Distributed Cooperative Caching (DCC), a mechanism to provide coherence to chip multiprocessors and apply the concept of cooperative caching in a distributed way. Through the usage of distributed directories we obtain a more scalable solution and, in addition, has a more flexible and energy-efficient tag allocation method. We also show that applications make different uses of cache and that an efficient allocation can take advantage of unused resources. We propose Elastic Cooperative Caching (ElasticCC), an adaptive cache organization able to redistribute cache resources dynamically depending on application requirements. One of the most important contributions of this technique is that adaptivity is fully managed by hardware and that all repartitioning mechanisms are based on distributed structures, allowing a better scalability. ElasticCC not only is able to repartition cache sizes to application requirements, but also is able to dynamically adapt to the different execution phases of each thread. Our experimental evaluation also has shown that the cache partitioning provided by ElasticCC is efficient and is almost able to match the off-chip miss rate of a configuration that doubles the cache space. Finally, we focus in the behavior of DRAM memories and memory controllers in chip multiprocessors. Although traditional memory schedulers work well for uniprocessors, we show that new access patterns advocate for a redesign of some parts of DRAM memories. Several organizations exist for multiprocessor DRAM schedulers, however, all of them must trade-off between memory throughput and fairness. We propose Thread Row Buffers, an extended storage area in DRAM memories able to store a data row for each thread. This mechanism enables a fair memory access scheduling without hurting memory throughput. Overall, in this thesis we present new organizations for the memory hierarchy of chip multiprocessors which focus on the scalability and of the proposed structures and adaptivity to application behavior. Results show that the presented techniques provide a better performance and energy-efficiency than existing state-of-the-art solutions

    A Software Approach to Unifying Multicore Caches

    Get PDF
    Multicore chips will have large amounts of fast on-chip cache memory, along with relatively slow DRAM interfaces. The on-chip cache memory, however, will be fragmented and spread over the chip; this distributed arrangement is hard for certain kinds of applications to exploit efficiently, and can lead to needless slow DRAM accesses. First, data accessed from many cores may be duplicated in many caches, reducing the amount of distinct data cached. Second, data in a cache distant from the accessing core may be slow to fetch via the cache coherence protocol. Third, software on each core can only allocate space in the small fraction of total cache memory that is local to that core. A new approach called software cache unification (SCU) addresses these challenges for applications that would be better served by a large shared cache. SCU chooses the on-chip cache in which to cache each item of data. As an application thread reads data items, SCU moves the thread to the core whose on-chip cache contains each item. This allows the thread to read the data quickly if it is already on-chip; if it is not, moving the thread causes the data to be loaded into the chosen on-chip cache. A new file cache for Linux, called MFC, uses SCU to improve performance of file-intensive applications, such as Unix file utilities. An evaluation on a 16-core AMD Opteron machine shows that MFC improves the throughput of file utilities by a factor of 1.6. Experiments with a platform that emulates future machines with less DRAM throughput per core shows that MFC will provide benefit to a growing range of applications.This material is based upon work supported by the National Science Foundation under grant number 0915164

    Hardware-Oriented Cache Management for Large-Scale Chip Multiprocessors

    Get PDF
    One of the key requirements to obtaining high performance from chip multiprocessors (CMPs) is to effectively manage the limited on-chip cache resources shared among co-scheduled threads/processes. This thesis proposes new hardware-oriented solutions for distributed CMP caches. Computer architects are faced with growing challenges when designing cache systems for CMPs. These challenges result from non-uniform access latencies, interference misses, the bandwidth wall problem, and diverse workload characteristics. Our exploration of the CMP cache management problem suggests a CMP caching framework (CC-FR) that defines three main approaches to solve the problem: (1) data placement, (2) data retention, and (3) data relocation. We effectively implement CC-FR's components by proposing and evaluating multiple cache management mechanisms.Pressure and Distance Aware Placement (PDA) decouples the physical locations of cache blocks from their addresses for the sake of reducing misses caused by destructive interferences. Flexible Set Balancing (FSB), on the other hand, reduces interference misses via extending the life time of cache lines through retaining some fraction of the working set at underutilized local sets to satisfy far-flung reuses. PDA implements CC-FR's data placement and relocation components and FSB applies CC-FR's retention approach.To alleviate non-uniform access latencies and adapt to phase changes in programs, Adaptive Controlled Migration (ACM) dynamically and periodically promotes cache blocks towards L2 banks close to requesting cores. ACM lies under CC-FR's data relocation category. Dynamic Cache Clustering (DCC), on the other hand, addresses diverse workload characteristics and growing non-uniform access latencies challenges via constructing a cache cluster for each core and expands/contracts all clusters synergistically to match each core's cache demand. DCC implements CC-FR's data placement and relocation approaches. Lastly, Dynamic Pressure and Distance Aware Placement (DPDA) combines PDA and ACM to cooperatively mitigate interference misses and non-uniform access latencies. Dynamic Cache Clustering and Balancing (DCCB), on the other hand, combines DCC and FSB to employ all CC-FR's categories and achieve higher system performance. Simulation results demonstrate the effectiveness of the proposed mechanisms and show that they compare favorably with related cache designs

    Doctor of Philosophy

    Get PDF
    dissertationWith the explosion of chip transistor counts, the semiconductor industry has struggled with ways to continue scaling computing performance in line with historical trends. In recent years, the de facto solution to utilize excess transistors has been to increase the size of the on-chip data cache, allowing fast access to an increased portion of main memory. These large caches allowed the continued scaling of single thread performance, which had not yet reached the limit of instruction level parallelism (ILP). As we approach the potential limits of parallelism within a single threaded application, new approaches such as chip multiprocessors (CMP) have become popular for scaling performance utilizing thread level parallelism (TLP). This dissertation identifies the operating system as a ubiquitous area where single threaded performance and multithreaded performance have often been ignored by computer architects. We propose that novel hardware and OS co-design has the potential to significantly improve current chip multiprocessor designs, enabling increased performance and improved power efficiency. We show that the operating system contributes a nontrivial overhead to even the most computationally intense workloads and that this OS contribution grows to a significant fraction of total instructions when executing several common applications found in the datacenter. We demonstrate that architectural improvements have had little to no effect on the performance of the OS over the last 15 years, leaving ample room for improvements. We specifically consider three potential solutions to improve OS execution on modern processors. First, we consider the potential of a separate operating system processor (OSP) operating concurrently with general purpose processors (GPP) in a chip multiprocessor organization, with several specialized structures acting as efficient conduits between these processors. Second, we consider the potential of segregating existing caching structures to decrease cache interference between the OS and application. Third, we propose that there are components within the OS itself that should be refactored to be both multithreaded and cache topology aware, which in turn, improves the performance and scalability of many-threaded applications

    Many-Task Computing and Blue Waters

    Full text link
    This report discusses many-task computing (MTC) generically and in the context of the proposed Blue Waters systems, which is planned to be the largest NSF-funded supercomputer when it begins production use in 2012. The aim of this report is to inform the BW project about MTC, including understanding aspects of MTC applications that can be used to characterize the domain and understanding the implications of these aspects to middleware and policies. Many MTC applications do not neatly fit the stereotypes of high-performance computing (HPC) or high-throughput computing (HTC) applications. Like HTC applications, by definition MTC applications are structured as graphs of discrete tasks, with explicit input and output dependencies forming the graph edges. However, MTC applications have significant features that distinguish them from typical HTC applications. In particular, different engineering constraints for hardware and software must be met in order to support these applications. HTC applications have traditionally run on platforms such as grids and clusters, through either workflow systems or parallel programming systems. MTC applications, in contrast, will often demand a short time to solution, may be communication intensive or data intensive, and may comprise very short tasks. Therefore, hardware and software for MTC must be engineered to support the additional communication and I/O and must minimize task dispatch overheads. The hardware of large-scale HPC systems, with its high degree of parallelism and support for intensive communication, is well suited for MTC applications. However, HPC systems often lack a dynamic resource-provisioning feature, are not ideal for task communication via the file system, and have an I/O system that is not optimized for MTC-style applications. Hence, additional software support is likely to be required to gain full benefit from the HPC hardware

    CHOP: adaptive filter-based DRAM caching for CMP server platforms

    Get PDF
    Journal ArticleAs manycore architectures enable a large number of cores on the die, a key challenge that emerges is the availability of memory bandwidth with conventional DRAM solutions. To address this challenge, integration of large DRAM caches that provide as much as 5× higher bandwidth and as low as 1/3rd of the latency (as compared to conventional DRAM) is very promising. However, organizing and implementing a large DRAM cache is challenging because of two primary tradeoffs: (a) DRAM caches at cache line granularity require too large an on-chip tag area that makes it undesirable and (b) DRAM caches with larger page granularity require too much bandwidth because the miss rate does not reduce enough to overcome the bandwidth increase. In this paper, we propose CHOP (Caching HOt Pages) in DRAM caches to address these challenges. We study several filter-based DRAM caching techniques: (a) a filter cache (CHOP-FC) that profiles pages and determines the hot subset of pages to allocate into the DRAM cache, (b) a memory-based filter cache (CHOPMFC) that spills and fills filter state to improve the accuracy and reduce the size of the filter cache and (c) an adaptive DRAM caching technique (CHOP-AFC) to determine when the filter cache should be enabled and disabled for DRAM caching. We conduct detailed simulations with server workloads to show that our filter-based DRAM caching techniques achieve the following: (a) on average over 30% performance improvement over previous solutions, (b) several magnitudes lower area overhead in tag space required for cache-line based DRAM caches, (c) significantly lower memory bandwidth consumption as compared to page-granular DRAM caches. Index Terms-DRAM cache; CHOP; adaptive filter; hot page; filter cache

    Architecting Data Centers for High Efficiency and Low Latency

    Full text link
    Modern data centers, housing remarkably powerful computational capacity, are built in massive scales and consume a huge amount of energy. The energy consumption of data centers has mushroomed from virtually nothing to about three percent of the global electricity supply in the last decade, and will continuously grow. Unfortunately, a significant fraction of this energy consumption is wasted due to the inefficiency of current data center architectures, and one of the key reasons behind this inefficiency is the stringent response latency requirements of the user-facing services hosted in these data centers such as web search and social networks. To deliver such low response latency, data center operators often have to overprovision resources to handle high peaks in user load and unexpected load spikes, resulting in low efficiency. This dissertation investigates data center architecture designs that reconcile high system efficiency and low response latency. To increase the efficiency, we propose techniques that understand both microarchitectural-level resource sharing and system-level resource usage dynamics to enable highly efficient co-locations of latency-critical services and low-priority batch workloads. We investigate the resource sharing on real-system simultaneous multithreading (SMT) processors to enable SMT co-locations by precisely predicting the performance interference. We then leverage historical resource usage patterns to further optimize the task scheduling algorithm and data placement policy to improve the efficiency of workload co-locations. Moreover, we introduce methodologies to better manage the response latency by automatically attributing the source of tail latency to low-level architectural and system configurations in both offline load testing environment and online production environment. We design and develop a response latency evaluation framework at microsecond-level precision for data center applications, with which we construct statistical inference procedures to attribute the source of tail latency. Finally, we present an approach that proactively enacts carefully designed causal inference micro-experiments to diagnose the root causes of response latency anomalies, and automatically correct them to reduce the response latency.PHDComputer Science & EngineeringUniversity of Michigan, Horace H. Rackham School of Graduate Studieshttps://deepblue.lib.umich.edu/bitstream/2027.42/144144/1/yunqi_1.pd
    corecore