Silicon compilation

Silicon compilation is a term used for many different purposes. In this paper we define silicon compilation as a mapping from some higher level description into layout. We define the basic issues in structural and behavioral silicon compilation and some possible solutions to those issues. Finally, we define the concept of an intelligent silicon compiler in which the compiler evaluates the quality of the generated design and attempts to improve it if it is not satisfactory

SPDL Model Checking via Property-Driven State Space Generation

In this report we describe how both, memory and time requirements for stochastic model checking of SPDL (stochastic propositional dynamic logic) formulae can significantly be reduced. SPDL is the stochastic extension of the multi-modal program logic PDL.\ud SPDL provides means to specify path-based properties with or without timing restrictions. Paths can be characterised by so-called programs, essentially regular expressions, where the executability can be made dependent on the validity of test formulae. For model-checking SPDL path formulae it is necessary to build a product transition system (PTS)\ud between the system model and the program automaton belonging to the path formula that is to be verified.\ud In many cases, this PTS can be drastically reduced during the model checking procedure, as the program restricts the number of potentially satisfying paths. Therefore, we propose an approach that directly generates the reduced PTS from a given SPA specification and an SPDL path formula.\ud The feasibility of this approach is shown through a selection of case studies, which show enormous state space reductions, at no increase in generation time.\u

VSS : a VHDL synthesis system

This report describes a register transfer synthesis system that allows a designer to interact with the design process. The designer can modify the compiled design by changing the input description, selecting optimization and mapping strategies, or graphically changing the generated design schematic. The VHDL language is used for input and output descriptions. An intermediate representation which incorporates signal typing and component attributes simplifies compilation and facilitates design optimization. The compilation process consists of two phases. First, a design composed of generic components is synthesized from the input description. Second, this design is translated into components from a particular library by a mapper and optimized by a logic optimizer. Redesign to new technologies can be accomplished by changing only the component library

Testability considerations for implementing an embedded memory subsystem

textThere are a number of testability considerations for VLSI design, but test coverage, test time, accuracy of test patterns and correctness of design information for DFD (Design for debug) are the most important ones in design with embedded memories. The goal of DFT (Design-for-Test) is to achieve zero defects. When it comes to the memory subsystem in SOCs (system on chips), many flavors of memory BIST (built-in self test) are able to get high test coverage in a memory, but often, no proper attention is given to the memory interface logic (shadow logic). Functional testing and BIST are the most prevalent tests for this logic, but functional testing is impractical for complicated SOC designs. As a result, industry has widely used at-speed scan testing to detect delay induced defects. Compared with functional testing, scan-based testing for delay faults reduces overall pattern generation complexity and cost by enhancing both controllability and observability of flip-flops. However, without proper modeling of memory, Xs are generated from memories. Also, when the design has chip compression logic, the number of ATPG patterns is increased significantly due to Xs from memories. In this dissertation, a register based testing method and X prevention logic are presented to tackle these problems. An important design stage for scan based testing with memory subsystems is the step to create a gate level model and verify with this model. The flow needs to provide a robust ATPG netlist model. Most industry standard CAD tools used to analyze fault coverage and generate test vectors require gate level models. However, custom embedded memories are typically designed using a transistor-level flow, there is a need for an abstraction step to generate the gate models, which must be equivalent to the actual design (transistor level). The contribution of the research is a framework to verify that the gate level representation of custom designs is equivalent to the transistor-level design. Compared to basic stuck-at fault testing, the number of patterns for at-speed testing is much larger than for basic stuck-at fault testing. So reducing test and data volume are important. In this desertion, a new scan reordering method is introduced to reduce test data with an optimal routing solution. With in depth understanding of embedded memories and flows developed during the study of custom memory DFT, a custom embedded memory Bit Mapping method using a symbolic simulator is presented in the last chapter to achieve high yield for memories.Electrical and Computer Engineerin

Doctor of Philosophy

dissertationThe design of integrated circuit (IC) requires an exhaustive verification and a thorough test mechanism to ensure the functionality and robustness of the circuit. This dissertation employs the theory of relative timing that has the advantage of enabling designers to create designs that have significant power and performance over traditional clocked designs. Research has been carried out to enable the relative timing approach to be supported by commercial electronic design automation (EDA) tools. This allows asynchronous and sequential designs to be designed using commercial cad tools. However, two very significant holes in the flow exist: the lack of support for timing verification and manufacturing test. Relative timing (RT) utilizes circuit delay to enforce and measure event sequencing on circuit design. Asynchronous circuits can optimize power-performance product by adjusting the circuit timing. A thorough analysis on the timing characteristic of each and every timing path is required to ensure the robustness and correctness of RT designs. All timing paths have to conform to the circuit timing constraints. This dissertation addresses back-end design robustness by validating full cyclical path timing verification with static timing analysis and implementing design for testability (DFT). Circuit reliability and correctness are necessary aspects for the technology to become commercially ready. In this study, scan-chain, a commercial DFT implementation, is applied to burst-mode RT designs. In addition, a novel testing approach is developed along with scan-chain to over achieve 90% fault coverage on two fault models: stuck-at fault model and delay fault model. This work evaluates the cost of DFT and its coverage trade-off then determines the best implementation. Designs such as a 64-point fast Fourier transform (FFT) design, an I2C design, and a mixed-signal design are built to demonstrate power, area, performance advantages of the relative timing methodology and are used as a platform for developing the backend robustness. Results are verified by performing post-silicon timing validation and test. This work strengthens overall relative timed circuit flow, reliability, and testability

Chippe : a system for constraint driven behavioral synthesis

This report describes the Chippe system, gives some background previous work and describes several sample design runs of the system. Also presented are the sources of the design tradeoffs used by Chippe, and overview of the internal design model, and experiences using the system

Analysis of Hardware Descriptions

The design process for integrated circuits requires a lot of analysis of circuit descriptions. An important class of analyses determines how easy it will be to determine if a physical component suffers from any manufacturing errors. As circuit complexities grow rapidly, the problem of testing circuits also becomes increasingly difficult. This thesis explores the potential for analysing a recent high level hardware description language called Ruby. In particular, we are interested in performing testability analyses of Ruby circuit descriptions. Ruby is ammenable to algebraic manipulation, so we have sought transformations that improve testability while preserving behaviour. The analysis of Ruby descriptions is performed by adapting a technique called abstract interpretation. This has been used successfully to analyse functional programs. This technique is most applicable where the analysis to be captured operates over structures isomorphic to the structure of the circuit. Many digital systems analysis tools require the circuit description to be given in some special form. This can lead to inconsistency between representations, and involves additional work converting between representations. We propose using the original description medium, in this case Ruby, for performing analyses. A related technique, called non-standard interpretation, is shown to be very useful for capturing many circuit analyses. An implementation of a system that performs non-standard interpretation forms the central part of the work. This allows Ruby descriptions to be analysed using alternative interpretations such test pattern generation and circuit layout interpretations. This system follows a similar approach to Boute's system semantics work and O'Donnell's work on Hydra. However, we have allowed a larger class of interpretations to be captured and offer a richer description language. The implementation presented here is constructed to allow a large degree of code sharing between different analyses. Several analyses have been implemented including simulation, test pattern generation and circuit layout. Non-standard interpretation provides a good framework for implementing these analyses. A general model for making non-standard interpretations is presented. Combining forms that combine two interpretations to produce a new interpretation are also introduced. This allows complex circuit analyses to be decomposed in a modular manner into smaller circuit analyses which can be built independently

Behavioral synthesis from VHDL using structured modeling

This dissertation describes work in behavioral synthesis involving the development of a VHDL Synthesis System VSS which accepts a VHDL behavioral input specification and performs technology independent synthesis to generate a circuit netlist of generic components. The VHDL language is used for input and output descriptions. An intermediate representation which incorporates signal typing and component attributes simplifies compilation and facilitates design optimization.A Structured Modeling methodology has been developed to suggest standard VHDL modeling practices for synthesis. Structured modeling provides recommendations for the use of available VHDL description styles so that optimal designs will be synthesized.A design composed of generic components is synthesized from the input description through a process of Graph Compilation, Graph Criticism, and Design Compilation. Experiments were performed to demonstrate the effects of different modeling styles on the quality of the design produced by VSS. Several alternative VHDL models were examined for each benchmark, illustrating the improvements in design quality achieved when Structured Modeling guidelines were followed

Custom Integrated Circuits

Contains reports on ten research projects.Analog Devices, Inc.IBM CorporationNational Science Foundation/Defense Advanced Research Projects Agency Grant MIP 88-14612Analog Devices Career Development Assistant ProfessorshipU.S. Navy - Office of Naval Research Contract N0014-87-K-0825AT&TDigital Equipment CorporationNational Science Foundation Grant MIP 88-5876