5 research outputs found

    Self-Configuration and Self-Optimization Process in Heterogeneous Wireless Networks

    Get PDF
    Self-organization in Wireless Mesh Networks (WMN) is an emergent research area, which is becoming important due to the increasing number of nodes in a network. Consequently, the manual configuration of nodes is either impossible or highly costly. So it is desirable for the nodes to be able to configure themselves. In this paper, we propose an alternative architecture for self-organization of WMN based on Optimized Link State Routing Protocol (OLSR) and the ad hoc on demand distance vector (AODV) routing protocols as well as using the technology of software agents. We argue that the proposed self-optimization and self-configuration modules increase the throughput of network, reduces delay transmission and network load, decreases the traffic of HELLO messages according to network’s scalability. By simulation analysis, we conclude that the self-optimization and self-configuration mechanisms can significantly improve the performance of OLSR and AODV protocols in comparison to the baseline protocols analyzed

    Intelligent IoT and Dynamic Network Semantic Maps for more Trustworthy Systems

    Get PDF
    As technology evolves, the Internet of Things (IoT) concept is gaining importance for constituting a foundation to reach optimum connectivity between people and things. For this to happen and to allow easier integration of sensors and other devices in these technologic environments (or networks), the configuration is a key process, promoting interoperability between heterogeneous devices and providing strategies and processes to enhance the network capabilities. The optimization of this important process of creating a truly dynamic network must be based on models that provide a standardization of communication patterns, protocols and technologies between the sensors. Despite standing as a major tendency today, many obstacles still arise when implementing an intelligent dynamic network. Existing models are not as widely adopted as expected and semantics are often not properly represented, hence resulting in complex and unsuitable configuration time. Thus, this work aims to understand the ideal models and ontologies to achieve proper architectures and semantic maps, which allow management and redundancy based on the information of the whole network, without compromising performance, and to develop a competent configuration of sensors to integrate in a contemporary industrial typical dynamic network

    Cooperation in open, decentralized, and heterogeneous computer networks

    Get PDF
    Community Networks (CN) are naturally open and decentralized structures, that grow organically with the addition of heterogeneous network devices, contributed and configured as needed by their participants. The continuous growth in popularity and dissemination of CNs in recent years has raised the perception of a mature and sustainable model for the provisioning of networking services. However, because such infrastructures include uncontrolled entities with non delimited responsibilities, every single network entity does indeed represent a potential single-point of failure that can stop the entire network from working, and that no other entity can prevent or even circumvent. Given the open and decentralized nature of CNs, that brings together individuals and organizations with different and even conflicting economic, political, and technical interests, the achievement of no more than basic consensus on the correctness of all network nodes is challenging. In such environment, the lack of self-determination for CN participants in terms of control and security of routing can be regarded as an obstacle for growth or even as a risk of collapse. To address this problem we first consider deployments of existing Wireless CN and we analyze their technology, characteristics, and performance. We perform an experimental evaluation of a production 802.11an Wireless CN, and compare to studies of other Wireless CN deployments in the literature. We compare experimentally obtained throughput traces with path-capacity calculations based on well-known conflict graph models. We observe that in the majority of cases the path chosen by the employed BMX6 routing protocol corresponds with the best identified path in our model. We analyze monitoring and interaction shortcomings of CNs and address these with Network Characterization Tool (NCT), a novel tool that allows users to assess network state and performance, and improve their quality of experience by individually modifying the routing parameters of their devices. We also evaluate performance outcomes when different routing policies are in use. Routing protocols provide self-management mechanisms that allow the continuous operation of a Community Mesh Network (CMN). We focus on three widely used proactive mesh routing protocols and their implementations: BMX6, OLSR, and Babel. We describe the core idea behind these protocols and study the implications of these in terms of scalability, performance, and stability by exposing them to typical but challenging network topologies and scenarios. Our results show the relative merits, costs, and limitations of the three protocols. Built upon the studied characteristics of typical CN deployments, their requirements on open and decentralized cooperation, and the potential controversy on the trustiness of particular components of a network infrastructure, we propose and evaluate SEMTOR, a novel routing-protocol that can satisfy these demands. SEMTOR allows the verifiable and undeniable definition and distributed application of individually trusted topologies for routing traffic towards each node. One unique advantage of SEMTOR is that it does not require a global consensus on the trustiness of any node and thus preserves cooperation among nodes with even oppositional defined trust specification. This gives each node admin the freedom to individually define the subset, and the resulting sub-topology, from the whole set of participating nodes that he considers sufficiently trustworthy to meet their security, data-delivery objectives and concerns. The proposed mechanisms have been realized as a usable and open-source implementation called BMX7, as successor of BMX6. We have evaluated its scalability, contributed robustness, and security. These results show that the usage of SEMTOR for securing trusted routing topologies is feasible, even when executed on real and very cheap (10 Euro, Linux SoC) routers as commonly used in Community Mesh Networks.Las Redes Comunitarias (CNs) son estructuras de naturaleza abierta y descentralizada, que crecen orgánicamente con la adición de dispositivos de red heterogéneos que aportan y configuran sus participantes según sea necesario. Sin embargo, debido a que estas infraestructuras incluyen entidades con responsabilidades poco delimitadas, cada entidad puede representar un punto de fallo que puede impedir que la red funcione y que ninguna otra entidad pueda prevenir o eludir. Dada la naturaleza abierta y descentralizada de las CNs, que agrupa individuos y organizaciones con diferentes e incluso contrapuestos intereses económicos, políticos y técnicos, conseguir poco más que un consenso básico sobre los nodos correctos en la red puede ser un reto. En este entorno, la falta de autodeterminación para los participantes de una CN en cuanto a control y seguridad del encaminamiento puede considerarse un obstáculo para el crecimiento o incluso un riesgo de colapso. Para abordar este problema consideramos las implementaciones de redes comunitarias inalámbricas (WCN) y se analiza su tecnología, características y desempeño. Realizamos una evaluación experimental de una WCN establecida y se compara con estudios de otros despliegues. Comparamos las trazas de rendimiento experimentales con cálculos de la capacidad de los caminos basados en modelos bien conocidos del grafo. Se observa que en la mayoría de los casos el camino elegido por el protocolo de encaminamiento BMX6 corresponde con el mejor camino identificado en nuestro modelo. Analizamos las limitaciones de monitorización e interacción en CNs y los tratamos con NCT, una nueva herramienta que permite evaluar el estado y rendimiento de la red, y mejorar la calidad de experiencia modificando los parámetros de sus dispositivos individuales. También evaluamos el rendimiento resultante para diferentes políticas de encaminamiento. Los protocolos de encaminamiento proporcionan mecanismos de autogestión que hacen posible el funcionamiento continuo de una red comunitaria mesh (CMN). Nos centramos en tres protocolos de encaminamiento proactivos para redes mesh ampliamente utilizados y sus implementaciones: BMX6, OLSR y Babel. Se describe la idea central de estos protocolos y se estudian la implicaciones de éstos en términos de escalabilidad, rendimiento y estabilidad al exponerlos a topologías y escenarios de red típicos pero exigentes. Nuestros resultados muestran los méritos, costes y limitaciones de los tres protocolos. A partir de las características analizadas en despliegues típicos de redes comunitarias, y de las necesidades en cuanto a cooperación abierta y descentralizada, y la esperable divergencia sobre la confiabilidad en ciertos componentes de la infraestructura de red, proponemos y evaluamos SEMTOR, un nuevo protocolo de encaminamiento que puede satisfacer estas necesidades. SEMTOR permite definir de forma verificable e innegable, así como aplicar de forma distribuida, topologías de confianza individualizadas para encaminar tráfico hacia cada nodo. Una ventaja única de SEMTOR es que no precisa de consenso global sobre la confianza en cualquier nodo y por tanto preserva la cooperación entre los nodos, incluso con especificaciones de confianza definidas por oposición. Esto proporciona a cada administrador de nodo la libertad para definir el subconjunto, y la sub-topología resultante, entre el conjunto de todos los nodos participantes que considere dignos de suficiente confianza para cumplir con su objetivo y criterio de seguridad y entrega de datos. Los mecanismos propuestos se han realizado en forma de una implementación utilizable de código abierto llamada BMX7. Se ha evaluado su escalabilidad, robustez y seguridad. Estos resultados demuestran que el uso de SEMTOR para asegurar topologías de encaminamiento de confianza es factible, incluso cuando se ejecuta en routers reales y muy baratos utilizados de forma habitual en WCN.Postprint (published version

    Self-Configuration and Self-Optimization Process in Heterogeneous Wireless Networks

    No full text
    Self-organization in Wireless Mesh Networks (WMN) is an emergent research area, which is becoming important due to the increasing number of nodes in a network. Consequently, the manual configuration of nodes is either impossible or highly costly. So it is desirable for the nodes to be able to configure themselves. In this paper, we propose an alternative architecture for self-organization of WMN based on Optimized Link State Routing Protocol (OLSR) and the ad hoc on demand distance vector (AODV) routing protocols as well as using the technology of software agents. We argue that the proposed self-optimization and self-configuration modules increase the throughput of network, reduces delay transmission and network load, decreases the traffic of HELLO messages according to network’s scalability. By simulation analysis, we conclude that the self-optimization and self-configuration mechanisms can significantly improve the performance of OLSR and AODV protocols in comparison to the baseline protocols analyzed
    corecore