Signal Processing Design of Low Probability of Intercept Waveforms

This thesis investigates a modification to Differential Phase Shift Keyed (DPSK) modulation to create a Low Probability of Interception/Exploitation (LPI/LPE) communications signal. A pseudorandom timing offset is applied to each symbol in the communications stream to intentionally create intersymbol interference (ISI) that hinders accurate symbol estimation and bit sequence recovery by a non-cooperative receiver. Two cooperative receiver strategies are proposed to mitigate the ISI due to symbol timing offset: a modified minimum Mean Square Error (MMSE) equalization algorithm and a multiplexed bank of equalizer filters determined by an adaptive Least Mean Square (LMS) algorithm. Both cooperative receivers require some knowledge of the pseudorandom symbol timing dither to successfully demodulate the communications waveform. Numerical Matlab® simulation is used to demonstrate the bit error rate performance of cooperative receivers and notional non-cooperative receivers for binary, 4-ary, and 8-ary DPSK waveforms transmitted through a line-of-sight, additive white Gaussian noise channel. Simulation results suggest that proper selection of pulse shape and probability distribution of symbol timing offsets produces a waveform that is accurately demodulated by the proposed cooperative receivers and significantly degrades non-cooperative receiver symbol estimation accuracy. In typical simulations, non-cooperative receivers required 2-8 dB more signal power than cooperative receivers to achieve a bit error rate of 1.0%. For nearly all reasonable parameter selections, non-cooperative receivers produced bit error rates in excess of 0.1%, even when signal power is unconstrained

Blind fractionally spaced channel equalization for shallow water PPM digital communications links

Underwater acoustic digital communications suffer from inter-symbol interference deriving from signal distortions caused by the channel propagation. Facing such kind of impairment becomes particularly challenging when dealing with shallow water scenarios characterized by short channel coherence time and large delay spread caused by time-varying multipath effects. Channel equalization operated on the received signal represents a crucial issue in order to mitigate the effect of inter-symbol interference and improve the link reliability. In this direction, this contribution presents a preliminary performance analysis of acoustic digital links adopting pulse position modulation in severe multipath scenarios. First, we show how the spectral redundancy offered by pulse position modulated signals can be fruitfully exploited when using fractional sampling at the receiver side, which is an interesting approach rarely addressed by the current literature. In this context, a novel blind equalization scheme is devised. Specifically, the equalizer is blindly designed according to a suitably modified Bussgang scheme in which the zero-memory nonlinearity is replaced by a M-memory nonlinearity, M being the pulse position modulation order. Numerical results not only confirm the feasibility of the technique described here, but also assess the quality of its performance. An extension to a very interesting complex case is also provided

Blind adaptive equalization for QAM signals: New algorithms and FPGA implementation.

Adaptive equalizers remove signal distortion attributed to intersymbol interference in band-limited channels. The tap coefficients of adaptive equalizers are time-varying and can be adapted using several methods. When these do not include the transmission of a training sequence, it is referred to as blind equalization. The radius-adjusted approach is a method to achieve blind equalizer tap adaptation based on the equalizer output radius for quadrature amplitude modulation (QAM) signals. Static circular contours are defined around an estimated symbol in a QAM constellation, which create regions that correspond to fixed step sizes and weighting factors. The equalizer tap adjustment consists of a linearly weighted sum of adaptation criteria that is scaled by a variable step size. This approach is the basis of two new algorithms: the radius-adjusted modified multitmodulus algorithm (RMMA) and the radius-adjusted multimodulus decision-directed algorithm (RMDA). An extension of the radius-adjusted approach is the selective update method, which is a computationally-efficient method for equalization. The selective update method employs a stop-and-go strategy based on the equalizer output radius to selectively update the equalizer tap coefficients, thereby, reducing the number of computations in steady-state operation. (Abstract shortened by UMI.) Source: Masters Abstracts International, Volume: 45-01, page: 0401. Thesis (M.A.Sc.)--University of Windsor (Canada), 2006

Channel estimation for SISO and MIMO OFDM communications systems.

Thesis (Ph.D.)-University of KwaZulu-Natal, Durban, 2010.Telecommunications in the current information age is increasingly relying on the wireless link. This is because wireless communication has made possible a variety of services ranging from voice to data and now to multimedia. Consequently, demand for new wireless capacity is growing rapidly at a very alarming rate. In a bid to cope with challenges of increasing demand for higher data rate, better quality of service, and higher network capacity, there is a migration from Single Input Single Output (SISO) antenna technology to a more promising Multiple Input Multiple Output (MIMO) antenna technology. On the other hand, Orthogonal Frequency Division Multiplexing (OFDM) technique has emerged as a very popular multi-carrier modulation technique to combat the problems associated with physical properties of the wireless channels such as multipath fading, dispersion, and interference. The combination of MIMO technology with OFDM techniques, known as MIMO-OFDM Systems, is considered as a promising solution to enhance the data rate of future broadband wireless communication Systems. This thesis addresses a major area of challenge to both SISO-OFDM and MIMO-OFDM Systems; estimation of accurate channel state information (CSI) in order to make possible coherent detection of the transmitted signal at the receiver end of the system. Hence, the first novel contribution of this thesis is the development of a low complexity adaptive algorithm that is robust against both slow and fast fading channel scenarios, in comparison with other algorithms employed in literature, to implement soft iterative channel estimator for turbo equalizer-based receiver for single antenna communication Systems. Subsequently, a Fast Data Projection Method (FDPM) subspace tracking algorithm is adapted to derive Channel Impulse Response Estimator for implementation of Decision Directed Channel Estimation (DDCE) for Single Input Single Output - Orthogonal Frequency Division Multiplexing (SISO-OFDM) Systems. This is implemented in the context of a more realistic Fractionally Spaced-Channel Impulse Response (FS-CIR) channel model, as against the channel characterized by a Sample Spaced-Channel Impulse Response (SS)-CIR widely assumed by other authors. In addition, a fast convergence Variable Step Size Normalized Least Mean Square (VSSNLMS)-based predictor, with low computational complexity in comparison with others in literatures, is derived for the implementation of the CIR predictor module of the DDCE scheme. A novel iterative receiver structure for the FDPM-based Decision Directed Channel Estimation scheme is also designed for SISO-OFDM Systems. The iterative idea is based on Turbo iterative principle. It is shown that improvement in the performance can be achieved with the iterative DDCE scheme for OFDM system in comparison with the non iterative scheme. Lastly, an iterative receiver structure for FDPM-based DDCE scheme earlier designed for SISO OFDM is extended to MIMO-OFDM Systems. In addition, Variable Step Size Normalized Least Mean Square (VSSNLMS)-based channel transfer function estimator is derived in the context of MIMO Channel for the implementation of the CTF estimator module of the iterative Decision Directed Channel Estimation scheme for MIMO-OFDM Systems in place of linear minimum mean square error (MMSE) criterion. The VSSNLMS-based channel transfer function estimator is found to show improved MSE performance of about -4 MSE (dB) at SNR of 5dB in comparison with linear MMSE-based channel transfer function estimator

Digital Signal Processing on FPGA for Short-Range Optical Communications Systems over Plastic Optical Fiber

Nowadays bandwidth requirements are increasing vertiginously. As new ways and concepts of how to share information emerge, new ways of how to access the web enter the market. Computers and mobile devices are only the beginning, the spectrum of web products and services such as IPTV, VoIP, on-line gaming, etc has been augmented by the possibility to share, store data, interact and work on the Cloud. The rush for bandwidth has led researchers from all over the world to enquire themselves on how to achieve higher data rates, and it is thanks to their efforts, that both long-haul and short-range communications systems have experienced a huge development during the last few years. However, as the demand for higher information throughput increases traditional short-range solutions reach their lim- its. As a result, optical solutions are now migrating from long-haul to short-range communication systems. As part of this trend, plastic optical fiber (POF) systems have arisen as promising candidates for applications where traditional glass optical fibers (GOF) are unsuitable. POF systems feature a series of characteristics that make them very suitable for the market requirements. More in detail, these systems are low cost, robust, easy to handle and to install, flexible and yet tolerant to bendings. Nonetheless, these features come at the expense of a considerable higher bandwidth limitation when compared to GOF systems. This thesis is aimed to the investigate the use of digital signal processing (DSP) algorithms to overcome the bandwidth limitation in short-range optical communications system based on POF. In particular, this dissertation presents the design and development of DSP algorithms on field programmable gate arrays (FPGAs) with the ultimate purpose of implementing a fully engineered 1Gbit/s Ethernet Media Converter capable of establishing data links over 50+ meters of PMMA-SI POF using an RC-LED as transmitte

Equalizers for communications satellites

Thesis (M. Eng.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2008.Includes bibliographical references (p. 57).This thesis investigates equalization for advanced protected satellite communications systems in development at MIT Lincoln Laboratory. Equalizers facilitate high data rate communication by correcting dispersion in the transmitter and receiver signal chains. An automated calibration procedure for finding optimal equalizers was developed. Repeated testing addressed questions about noise amplification, filter complexity requirements, and narrow band performance degradation. After examining various architectures, it was determined that the FIR filter was the best equalizer structure given the nature of the channel. The basic calibration procedure was also extended for use at high RF frequencies by using a spectrum analyzer as a tuned receiver.by Leon Fay.M.Eng

Compensation of fibre impairments in coherent optical systems

Tese de mestrado integrado. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 201