Maximum Multipath Routing Throughput in Multirate Wireless Mesh Networks

In this paper, we consider the problem of finding the maximum routing throughput between any pair of nodes in an arbitrary multirate wireless mesh network (WMN) using multiple paths. Multipath routing is an efficient technique to maximize routing throughput in WMN, however maximizing multipath routing throughput is a NP-complete problem due to the shared medium for electromagnetic wave transmission in wireless channel, inducing collision-free scheduling as part of the optimization problem. In this work, we first provide problem formulation that incorporates collision-free schedule, and then based on this formulation we design an algorithm with search pruning that jointly optimizes paths and transmission schedule. Though suboptimal, compared to the known optimal single path flow, we demonstrate that an efficient multipath routing scheme can increase the routing throughput by up to 100% for simple WMNs.Comment: This paper has been accepted for publication in IEEE 80th Vehicular Technology Conference, VTC-Fall 201

On the Benefits of a Cooperative Layer-2 based Routing Approach for Hybrid Wireless Mesh Networks

In a wireless mesh network, the convenience of a routing strategy strongly depends on the mobility of the intermediate nodes that compose the paths. Taking into account this behavior, this paper presents a routing scheme that works differently accordingly to the nodes mobility. In this sense, a proactive routing scheme is restricted to the backbone in order to promote the use of stable routes. On the other hand, the reactive protocol is used to search routes to or from a mobile destination. Both approaches are simultaneously implemented in the mesh nodes so that the routing protocols share routing information that optimize the network performance. Aiming at guaranteeing the IP compatibility, the combination of the two protocols in the core routers is carried out at the Medium Access Control (MAC) layer. Opposite to the operation at IP layer where two routing protocols are not able to concurrently work, the transfer of the routing tasks to the MAC layer enables the use of multiple independent forwarding tables. Simulation results show the goodness of the proposal in terms of packet losses and data delayTriviño, A.; Ariza, A.; Casilari, E.; Cano Escribá, JC. (2013). On the Benefits of a Cooperative Layer-2 based Routing Approach for Hybrid Wireless Mesh Networks. China Communications. 10(8):88-99. doi:10.1109/CC.2013.6633748S889910

Joint multicast routing and channel assignment in multiradio multichannel wireless mesh networks using tabu search

Copyright @ 2009 IEEE Computer SocietyThis paper proposes a tabu search (TS) based optimization approach to search a minimum-interference multicast tree which satisfies the end-to-end delay constraint and optimizes the usage of the scarce radio network resource in wireless mesh networks. The path-oriented encoding method is adopted and each candidate solution is represented by a tree data structure (i.e., a set of paths). Since we expect the multicast trees on which the minimum-interference channel assignment can be produced, a fitness function that returns the total channel conflict is devised. The techniques for controlling the tabu search procedure are well developed. A simple yet effective channel assignment algorithm is proposed to reduce the channel conflict. Simulation results show that the proposed TS multicast algorithm can produce the multicast trees which have better performance in terms of both the total channel conflict and the tree cost than that of a well known multicast algorithm in wireless mesh networks.This work was supported by the Engineering and Physical Sciences Research Council (EPSRC) of UK under Grant EP/E060722/1

Joint multicast routing and channel assignment in multiradio multichannel wireless mesh networks using simulated annealing

This is the post-print version of the article - Copyright @ 2008 Springer-VerlagThis paper proposes a simulated annealing (SA) algorithm based optimization approach to search a minimum-interference multicast tree which satisfies the end-to-end delay constraint and optimizes the usage of the scarce radio network resource in wireless mesh networks. In the proposed SA multicast algorithm, the path-oriented encoding method is adopted and each candidate solution is represented by a tree data structure (i.e., a set of paths). Since we anticipate the multicast trees on which the minimum-interference channel assignment can be produced, a fitness function that returns the total channel conflict is devised. The techniques for controlling the annealing process are well developed. A simple yet effective channel assignment algorithm is proposed to reduce the channel conflict. Simulation results show that the proposed SA based multicast algorithm can produce the multicast trees which have better performance in terms of both the total channel conflict and the tree cost than that of a well known multicast algorithm in wireless mesh networks.This work was supported by the Engineering and Physical Sciences Research Council (EPSRC) of UK under Grant EP/E060722/1

Joint QoS multicast routing and channel assignment in multiradio multichannel wireless mesh networks using intelligent computational methods

Copyright @ 2010 Elsevier B.V. All rights reserved.In this paper, the quality of service multicast routing and channel assignment (QoS-MRCA) problem is investigated. It is proved to be a NP-hard problem. Previous work separates the multicast tree construction from the channel assignment. Therefore they bear severe drawback, that is, channel assignment cannot work well with the determined multicast tree. In this paper, we integrate them together and solve it by intelligent computational methods. First, we develop a unified framework which consists of the problem formulation, the solution representation, the fitness function, and the channel assignment algorithm. Then, we propose three separate algorithms based on three representative intelligent computational methods (i.e., genetic algorithm, simulated annealing, and tabu search). These three algorithms aim to search minimum-interference multicast trees which also satisfy the end-to-end delay constraint and optimize the usage of the scarce radio network resource in wireless mesh networks. To achieve this goal, the optimization techniques based on state of the art genetic algorithm and the techniques to control the annealing process and the tabu search procedure are well developed separately. Simulation results show that the proposed three intelligent computational methods based multicast algorithms all achieve better performance in terms of both the total channel conflict and the tree cost than those comparative references.This work was supported by the Engineering and Physical Sciences Research Council (EPSRC) of UK under Grant EP/E060722/1

A genetic-inspired joint multicast routing and channel assignment algorithm in wireless mesh networks

Copyright @ 2008 IEEEThis paper proposes a genetic algorithm (GA) based optimization approach to search a minimum-interference multicast tree which satis¯es the end-to-end delay constraint and optimizes the usage of the scarce radio network resource in wireless mesh networks. The path-oriented en- coding method is used and each chromosome is represented by a tree data structure (i.e., a set of paths). Since we expect the multicast trees on which the minimum-interference channel assignment can be produced, a fitness function that returns the total channel conflict is devised. Crossover and mutation are well designed to adapt to the tree structure. A simple yet effective channel assignment algorithm is proposed to reduce the channel conflict. Simulation results show that the proposed GA based multicast algorithm achieves better performance in terms of both the total channel conflict and the tree cost than that of a well known algorithm

SMART DEPLOYMENT WITH ROUTING PROTOCOL FOR LOW-POWER AND LOSSY NETWORKS TOPOLOGY IN WIRELESS MESH NETWORKS BY MULTI-OBJECTIVE OPTIMIZATION ALGORITHM

Techniques are provided for a multi-objective model for the Wireless Mesh Networks (WMNs) planning problem where three conflicting objectives are optimized simultaneously. Different discrete recommendation areas may form different network topologies, thus screening out the best recommendation. In order to evaluate the network topology, a mechanism is described to simulate the radio coverage and Routing Protocol for Low-Power and Lossy Networks (RPL) simulator to search the optimal positon by new deployments generated iteratively. In particular, provided are (1) a networking deployment mathematical model based on RPL topology, (2) a multi-objective optimization approach to search the best RPL topology, and (3) model resolution after optimizing the candidate sets