High-performance signal acquisition algorithms for wireless communications receivers

Due to the uncertainties introduced by the propagation channel, and RF and mixed signal circuits imperfections, digital communication receivers require efficient and robust signal acquisition algorithms for timing and carrier recovery, and interfer- ence rejection. The main theme of this work is the development of efficient and robust signal synchronization and interference rejection schemes for narrowband, wideband and ultra wideband communications systems. A series of novel signal acquisition schemes together with their performance analysis and comparisons with existing state-of-the- art results are introduced. The design effort is first focused on narrowband systems, and then on wideband and ultra wideband systems. For single carrier modulated narrowband systems, it is found that conventional timing recovery schemes present low efficiency, e.g., certain feedback timing recov- ery schemes exhibit the so-called hang-up phenomenon, while another class of blind feedforward timing recovery schemes presents large self-noise. Based on a general re- search framework, we propose new anti-hangup algorithms and prefiltering techniques to speed up the feedback timing recovery and reduce the self-noise of feedforward tim- ing estimators, respectively. Orthogonal frequency division multiplexing (OFDM) technique is well suited for wideband wireless systems. However, OFDM receivers require high performance car-rier and timing synchronization. A new coarse synchronization scheme is proposed for efficient carrier frequency offset and timing acquisition. Also, a novel highly accurate decision-directed algorithm is proposed to track and compensate the residual phase and timing errors after the coarse synchronization step. Both theoretical analysis and computer simulations indicate that the proposed algorithms greatly improve the performance of OFDM receivers. The results of an in-depth study show that a narrowband interference (NBI) could cause serious performance loss in multiband OFDMbased ultra-wideband (UWB) sys- tems. A novel NBI mitigation scheme, based on a digital NBI detector and adaptive analog notch filter bank, is proposed to reduce the effects of NBI in UWB systems. Simulation results show that the proposed NBI mitigation scheme improves signifi- cantly the performance of a standard UWB receiver (this improvement manifests as a signal-to-noise ratio (SNR) gain of 9 dB)

Timing synchronization in MIMO-OFDM systems

OFDM (Orthogonal Frequency Division Multiplexing) provides a promising physical layer for 4G and 3GPP LTE Systems in terms of efficient use of bandwidth and high data rates. It is used in several applications likeWiFi (IEEE 802.11n),WiMax (IEEE 802.16), Digital Audio Broadcasting (DAB), Digital Video Broadcasting (DVB) and so on. OFDM suffers from inter-symbol interference and inter-carrier interference in wireless and fading environments and it is important to estimate and correct the start of OFDM symbol efficiently to reduce timing and frequency offset errors. Synchronization issues in OFDM are crucial and can lead to certain amount of information loss if they are not properly addressed. There are two modes of implementation forDigital Video Broadcasting-Terrestrial (DVB-T) and this thesis implements the 2K mode. It highlights the implementation of OFDM in DVB-T according to the European Telecommunications Standards Institute (ETSI) . It mainly focuses on the timing offset problem present in OFDM systems and its proposed solution using Cyclic Prefix (CP) as a modified Schmidl and Cox’s (SC) algorithm. Simulations were performed to compare the different synchronization methods with different amount of timing offsets and under different channel environments

Timing and Carrier Synchronization in Wireless Communication Systems: A Survey and Classification of Research in the Last 5 Years

Timing and carrier synchronization is a fundamental requirement for any wireless communication system to work properly. Timing synchronization is the process by which a receiver node determines the correct instants of time at which to sample the incoming signal. Carrier synchronization is the process by which a receiver adapts the frequency and phase of its local carrier oscillator with those of the received signal. In this paper, we survey the literature over the last 5 years (2010–2014) and present a comprehensive literature review and classification of the recent research progress in achieving timing and carrier synchronization in single-input single-output (SISO), multiple-input multiple-output (MIMO), cooperative relaying, and multiuser/multicell interference networks. Considering both single-carrier and multi-carrier communication systems, we survey and categorize the timing and carrier synchronization techniques proposed for the different communication systems focusing on the system model assumptions for synchronization, the synchronization challenges, and the state-of-the-art synchronization solutions and their limitations. Finally, we envision some future research directions

System design and validation of multi-band OFDM wireless communications with multiple antennas

[no abstract

Architectures and synchronization techniques for distributed satellite systems: a survey

Cohesive Distributed Satellite Systems (CDSSs) is a key enabling technology for the future of remote sensing and communication missions. However, they have to meet strict synchronization requirements before their use is generalized. When clock or local oscillator signals are generated locally at each of the distributed nodes, achieving exact synchronization in absolute phase, frequency, and time is a complex problem. In addition, satellite systems have significant resource constraints, especially for small satellites, which are envisioned to be part of the future CDSSs. Thus, the development of precise, robust, and resource-efficient synchronization techniques is essential for the advancement of future CDSSs. In this context, this survey aims to summarize and categorize the most relevant results on synchronization techniques for Distributed Satellite Systems (DSSs). First, some important architecture and system concepts are defined. Then, the synchronization methods reported in the literature are reviewed and categorized. This article also provides an extensive list of applications and examples of synchronization techniques for DSSs in addition to the most significant advances in other operations closely related to synchronization, such as inter-satellite ranging and relative position. The survey also provides a discussion on emerging data-driven synchronization techniques based on Machine Learning (ML). Finally, a compilation of current research activities and potential research topics is proposed, identifying problems and open challenges that can be useful for researchers in the field.This work was supported by the Luxembourg National Research Fund (FNR), through the CORE Project COHEsive SATellite (COHESAT): Cognitive Cohesive Networks of Distributed Units for Active and Passive Space Applications, under Grant FNR11689919.Award-winningPostprint (published version

Pushing the Limits of Indoor Localization in Today’s Wi-Fi Networks

Wireless networks are ubiquitous nowadays and play an increasingly important role in our everyday lives. Many emerging applications including augmented reality, indoor navigation and human tracking, rely heavily on Wi-Fi, thus requiring an even more sophisticated network. One key component for the success of these applications is accurate localization. While we have GPS in the outdoor environment, indoor localization at a sub-meter granularity remains challenging due to a number of factors, including the presence of strong wireless multipath reflections indoors and the burden of deploying and maintaining any additional location service infrastructure. On the other hand, Wi-Fi technology has developed significantly in the last 15 years evolving from 802.11b/a/g to the latest 802.11n and 802.11ac standards. Single user multiple-input, multiple-output (SU-MIMO) technology has been adopted in 802.11n while multi-user MIMO is introduced in 802.11ac to increase throughput. In Wi-Fi’s development, one interesting trend is the increasing number of antennas attached to a single access point (AP). Another trend is the presence of frequency-agile radios and larger bandwidths in the latest 802.11n/ac standards. These opportunities can be leveraged to increase the accuracy of indoor wireless localization significantly in the two systems proposed in this thesis: ArrayTrack employs multi-antenna APs for angle-of-arrival (AoA) information to localize clients accurately indoors. It is the first indoor Wi-Fi localization system able to achieve below half meter median accuracy. Innovative multipath identification scheme is proposed to handle the challenging multipath issue in indoor environment. ArrayTrack is robust in term of signal to noise ratio, collision and device orientation. ArrayTrack does not require any offline training and the computational load is small, making it a great candidate for real-time location services. With six 8-antenna APs, ArrayTrack is able to achieve a median error of 23 cm indoors in the presence of strong multipath reflections in a typical office environment. ToneTrack is a fine-grained indoor localization system employing time difference of arrival scheme (TDoA). ToneTrack uses a novel channel combination algorithm to increase effective bandwidth without increasing the radio’s sampling rate, for higher resolution time of arrival (ToA) information. A new spectrum identification scheme is proposed to retrieve useful information from a ToA profile even when the overall profile is mostly inaccurate. The triangle inequality property is then applied to detect and discard the APs whose direct path is 100% blocked. With a combination of only three 20 MHz channels in the 2.4 GHz band, ToneTrack is able to achieve below one meter median error, outperforming the traditional super-resolution ToA schemes significantly

Orthogonal frequency division multiplexing for optical access networks

Orthogonal Frequency Division Multiplexing (OFDM) is a modulation scheme with numerous advantages that has for years been employed as the leading physical interface in many wired and wireless communication systems. Recently, with advancements made in digital signal processing, there has been a surge of interest in applying OFDM techniques for optical communications. This thesis presents extensive research on optical OFDM and how it is being applied in access networks. With the aid of theoretical analysis, simulations and experiments, it is shown that the system performance of direct-detection optical OFDM (DD-OOFDM) in the presence of MZM non-linear distortion can be improved by proper biasing and selection of appropriate drive to the MZM. Investigations are conducted to illustrate how a variation in the number of subcarriers and the modulation format influences the sensitivity of the DD-OOFDM system to the MZM non-linear distortion. The possibility of improving the spectral efficiency by reduction of the width of the guard band is also investigated. This thesis also looks into the radio-over-fibre (RoF) transmission of Multiband OFDM UWB as a transparent and low-cost solution for distributing multi-Gbit/s data to end-users in FTTH networks. Due to relaxed regulatory requirements and the wide bandwidth available, UWB operation in the 60-GHz band is also considered for this FTTH application scenario. Four techniques for enabling MB-OFDM UWB RoF operation in the 60-GHz band are experimentally demonstrated. The impacts of various parameters on the performance of the techniques as well as the limitations imposed by fibre distribution are illustrated. Finally, a digital pre-distorter is proposed for compensating for the MZM non-linearity. Experimental demonstration of this digital pre-distortion in an UWB over fibre transmission system shows an increased tolerance to the amplitude of the driving OFDM signal as well as an increase in the optimum modulation index of the OFDM signal

Advanced receiver structures for mobile MIMO multicarrier communication systems

Beyond third generation (3G) and fourth generation (4G) wireless communication systems are targeting far higher data rates, spectral efficiency and mobility requirements than existing 3G networks. By using multiple antennas at the transmitter and the receiver, multiple-input multiple-output (MIMO) technology allows improving both the spectral efficiency (bits/s/Hz), the coverage, and link reliability of the system. Multicarrier modulation such as orthogonal frequency division multiplexing (OFDM) is a powerful technique to handle impairments specific to the wireless radio channel. The combination of multicarrier modulation together with MIMO signaling provides a feasible physical layer technology for future beyond 3G and fourth generation communication systems. The theoretical benefits of MIMO and multicarrier modulation may not be fully achieved because the wireless transmission channels are time and frequency selective. Also, high data rates call for a large bandwidth and high carrier frequencies. As a result, an important Doppler spread is likely to be experienced, leading to variations of the channel over very short period of time. At the same time, transceiver front-end imperfections, mobility and rich scattering environments cause frequency synchronization errors. Unlike their single-carrier counterparts, multi-carrier transmissions are extremely sensitive to carrier frequency offsets (CFO). Therefore, reliable channel estimation and frequency synchronization are necessary to obtain the benefits of MIMO OFDM in mobile systems. These two topics are the main research problems in this thesis. An algorithm for the joint estimation and tracking of channel and CFO parameters in MIMO OFDM is developed in this thesis. A specific state-space model is introduced for MIMO OFDM systems impaired by multiple carrier frequency offsets under time-frequency selective fading. In MIMO systems, multiple frequency offsets are justified by mobility, rich scattering environment and large angle spread, as well as potentially separate radio frequency - intermediate frequency chains. An extended Kalman filter stage tracks channel and CFO parameters. Tracking takes place in time domain, which ensures reduced computational complexity, robustness to estimation errors as well as low estimation variance in comparison to frequency domain processing. The thesis also addresses the problem of blind carrier frequency synchronization in OFDM. Blind techniques exploit statistical or structural properties of the OFDM modulation. Two novel approaches are proposed for blind fine CFO estimation. The first one aims at restoring the orthogonality of the OFDM transmission by exploiting the properties of the received signal covariance matrix. The second approach is a subspace algorithm exploiting the correlation of the channel frequency response among the subcarriers. Both methods achieve reliable estimation of the CFO regardless of multipath fading. The subspace algorithm needs extremely small sample support, which is a key feature in the face of time-selective channels. Finally, the Cramér-Rao (CRB) bound is established for the problem in order to assess the large sample performance of the proposed algorithms.reviewe