Scalability of broadcast performance in wireless network-on-chip

Networks-on-Chip (NoCs) are currently the paradigm of choice to interconnect the cores of a chip multiprocessor. However, conventional NoCs may not suffice to fulfill the on-chip communication requirements of processors with hundreds or thousands of cores. The main reason is that the performance of such networks drops as the number of cores grows, especially in the presence of multicast and broadcast traffic. This not only limits the scalability of current multiprocessor architectures, but also sets a performance wall that prevents the development of architectures that generate moderate-to-high levels of multicast. In this paper, a Wireless Network-on-Chip (WNoC) where all cores share a single broadband channel is presented. Such design is conceived to provide low latency and ordered delivery for multicast/broadcast traffic, in an attempt to complement a wireline NoC that will transport the rest of communication flows. To assess the feasibility of this approach, the network performance of WNoC is analyzed as a function of the system size and the channel capacity, and then compared to that of wireline NoCs with embedded multicast support. Based on this evaluation, preliminary results on the potential performance of the proposed hybrid scheme are provided, together with guidelines for the design of MAC protocols for WNoC.Peer ReviewedPostprint (published version

The impact of traffic localisation on the performance of NoCs for very large manycore systems

The scaling of semiconductor technologies is leading to processors with increasing numbers of cores. The adoption of Networks-on-Chip (NoC) in manycore systems requires a shift in focus from computation to communication, as communication is fast becoming the dominant factor in processor performance. In large manycore systems, performance is predicated on the locality of communication. In this work, we investigate the performance of three NoC topologies for systems with thousands of processor cores under two types of localised traffic. We present latency and throughput results comparing fat quadtree, concentrated mesh and mesh topologies under different degrees of localisation. Our results, based on the ITRS physical data for 2023, show that the type and degree of localisation of traffic significantly affects the NoC performance, and that scale-invariant topologies perform worse than flat topologies

Energy Scalability of On-Chip Interconnection Networks in Multicore Architectures

On-chip interconnection networks (OCNs) such as point-to-point networks and buses form the communication backbone in systems-on-a-chip, multicore processors, and tiled processors. OCNs can consume significant portions of a chip's energy budget, so analyzing their energy consumption early in the design cycle becomes important for architectural design decisions. Although numerous studies have examined OCN implementation and performance, few have examined energy. This paper develops an analytical framework for energy estimation in OCNs and presents results based on both analytical models of communication patterns and real network traces from applications running on a tiled multicore processor. Our analytical framework supports arbitrary OCN topologies under arbitrary communication patterns while accounting for wire length, switch energy, and network contention. It is the first to incorporate the effects of communication locality and network contention, and use real traces extensively. This paper compares the energy of point-to-point networks against buses under varying degrees of communication locality. The results indicate that, for 16 or more processors, a one-dimensional and a two-dimensional point-to-point network provide 66% and 82% energy savings, respectively, over a bus assuming that processors communicate with equal likelihood. The energy savings increase for patterns which exhibit locality. For the two-dimensional point-to-point OCN of the Raw tiled microprocessor, contention contributes a maximum of just 23% of the OCN energy, using estimated values for channel, switch control logic, and switch queue buffer energy of 34.5pJ, 17pJ, and 12pJ, respectively. Our results show that the energy-delay product per message decreases with increasing processor message injection rate

Non-power-of-Two FFTs: Exploring the Flexibility of the Montium TP

Coarse-grain reconfigurable architectures, like the Montium TP, have proven to be a very successful approach for low-power and high-performance computation of regular digital signal processing algorithms. This paper presents the implementation of a class of non-power-of-two FFTs to discover the limitations and Flexibility of the Montium TP for less regular algorithms. A non-power-of-two FFT is less regular compared to a traditional power-of-two FFT. The results of the implementation show the processing time, accuracy, energy consumption and Flexibility of the implementation

Automatic synthesis and optimization of chip multiprocessors

The microprocessor technology has experienced an enormous growth during the last decades. Rapid downscale of the CMOS technology has led to higher operating frequencies and performance densities, facing the fundamental issue of power dissipation. Chip Multiprocessors (CMPs) have become the latest paradigm to improve the power-performance efficiency of computing systems by exploiting the parallelism inherent in applications. Industrial and prototype implementations have already demonstrated the benefits achieved by CMPs with hundreds of cores.CMP architects are challenged to take many complex design decisions. Only a few of them are:- What should be the ratio between the core and cache areas on a chip?- Which core architectures to select?- How many cache levels should the memory subsystem have?- Which interconnect topologies provide efficient on-chip communication?These and many other aspects create a complex multidimensional space for architectural exploration. Design Automation tools become essential to make the architectural exploration feasible under the hard time-to-market constraints. The exploration methods have to be efficient and scalable to handle future generation on-chip architectures with hundreds or thousands of cores.Furthermore, once a CMP has been fabricated, the need for efficient deployment of the many-core processor arises. Intelligent techniques for task mapping and scheduling onto CMPs are necessary to guarantee the full usage of the benefits brought by the many-core technology. These techniques have to consider the peculiarities of the modern architectures, such as availability of enhanced power saving techniques and presence of complex memory hierarchies.This thesis has several objectives. The first objective is to elaborate the methods for efficient analytical modeling and architectural design space exploration of CMPs. The efficiency is achieved by using analytical models instead of simulation, and replacing the exhaustive exploration with an intelligent search strategy. Additionally, these methods incorporate high-level models for physical planning. The related contributions are described in Chapters 3, 4 and 5 of the document.The second objective of this work is to propose a scalable task mapping algorithm onto general-purpose CMPs with power management techniques, for efficient deployment of many-core systems. This contribution is explained in Chapter 6 of this document.Finally, the third objective of this thesis is to address the issues of the on-chip interconnect design and exploration, by developing a model for simultaneous topology customization and deadlock-free routing in Networks-on-Chip. The developed methodology can be applied to various classes of the on-chip systems, ranging from general-purpose chip multiprocessors to application-specific solutions. Chapter 7 describes the proposed model.The presented methods have been thoroughly tested experimentally and the results are described in this dissertation. At the end of the document several possible directions for the future research are proposed