Scaling Distributed Cache Hierarchies through Computation and Data Co-Scheduling

Cache hierarchies are increasingly non-uniform, so for systems to scale efficiently, data must be close to the threads that use it. Moreover, cache capacity is limited and contended among threads, introducing complex capacity/latency tradeoffs. Prior NUCA schemes have focused on managing data to reduce access latency, but have ignored thread placement; and applying prior NUMA thread placement schemes to NUCA is inefficient, as capacity, not bandwidth, is the main constraint. We present CDCS, a technique to jointly place threads and data in multicores with distributed shared caches. We develop novel monitoring hardware that enables fine-grained space allocation on large caches, and data movement support to allow frequent full-chip reconfigurations. On a 64-core system, CDCS outperforms an S-NUCA LLC by 46% on average (up to 76%) in weighted speedup and saves 36% of system energy. CDCS also outperforms state-of-the-art NUCA schemes under different thread scheduling policies.National Science Foundation (U.S.) (Grant CCF-1318384)Massachusetts Institute of Technology. Department of Electrical Engineering and Computer Science (Jacobs Presidential Fellowship)United States. Defense Advanced Research Projects Agency (PERFECT Contract HR0011-13-2-0005

Jenga: Harnessing Heterogeneous Memories through Reconfigurable Cache Hierarchies

Conventional memory systems are organized as a rigid hierarchy, with multiple levels of progressively larger and slower memories. Hierarchy allows a simple, fixed design to benefit a wide range of applications, because working sets settle at the smallest (and fastest) level they fit in. However, rigid hierarchies also cause significant overheads, because each level adds latency and energy even when it does not capture the working set. In emerging systems with heterogeneous memory technologies such as stacked DRAM, these overheads often limit performance and efficiency. We propose Jenga, a reconfigurable cache hierarchy that avoids these pathologies and approaches the performance of a hierarchy optimized for each application. Jenga monitors application behavior and dynamically builds virtual cache hierarchies out of heterogeneous, distributed cache banks. Jenga uses simple hardware support and a novel software runtime to configure virtual cache hierarchies. On a 36-core CMP with a 1 GB stacked-DRAM cache, Jenga outperforms a combination of state-of-the-art techniques by 10% on average and by up to 36%, and does so while saving energy, improving system-wide energy-delay product by 29% on average and by up to 96%

A Cache Model for Modern Processors

Modern processors use high-performance cache replacement policies that outperform traditional alternatives like least-recently used (LRU). Unfortunately, current cache models use stack distances to predict LRU or its variants, and cannot capture these high-performance policies. Accurate predictions of cache performance enable many optimizations in multicore systems. For example, cache partitioning uses these predictions to divide capacity among applications in order to maximize performance, guarantee quality of service, or achieve other system objectives. Without an accurate model for high-performance replacement policies, these optimizations are unavailable to modern processors. We present a new probabilistic cache model designed for high-performance replacement policies. This model uses absolute reuse distances instead of stack distances, which makes it applicable to arbitrary age-based replacement policies. We thoroughly validate our model on several high-performance policies on synthetic and real benchmarks, where its median error is less than 1%. Finally, we present two case studies showing how to use the model to improve shared and single-stream cache performance

Cache management policy in gem5

The rapid development of computing platforms has widened the gap between the computing system and memory system, placing more pressure on cache, which is an integral part of the memory system. Despite numerous studies on cache management policies to optimize resource usage, some of them cannot keep up with the fast-paced trends in computing devices. Many of the state-of-the-art cache replacement policies and prefetchers in our research group are based on simulators with simple hardware abstraction for easy development and prototyping, but they do not support more realistic environments, such as cache coherence and heterogeneous systems. This thesis aims to experimentally transplant several cache management policies to more advanced simulators and provide initial experience in dealing with the challenges encountered in the process.Electrical and Computer Engineerin

STT-RAM을 이용한 에너지 효율적인 캐시 설계 기술

학위논문 (박사)-- 서울대학교 대학원 : 공과대학 전기·컴퓨터공학부, 2019. 2. 최기영.지난 수십 년간 '메모리 벽' 문제를 해결하기 위해 온 칩 캐시의 크기는 꾸준히 증가해왔다. 하지만 지금까지 캐시에 주로 사용되어 온 메모리 기술인 SRAM은 낮은 집적도와 높은 대기 전력 소모로 인해 큰 캐시를 구성하는 데에는 적합하지 않다. 이러한 SRAM의 단점을 보완하기 위해 더 높은 집적도와 낮은 대기 전력을 소모하는 새로운 메모리 기술인 STT-RAM으로 SRAM을 대체하는 것이 제안되었다. 하지만 STT-RAM은 데이터를 쓸 때 많은 에너지와 시간을 소비하기 때문에 단순히 SRAM을 STT-RAM으로 대체하는 것은 오히려 캐시 에너지 소비를 증가시킨다. 이러한 문제를 해결하기 위해 본 논문에서는 STT-RAM을 이용한 에너지 효율적인 캐시 설계 기술들을 제안한다. 첫 번째, 배타적 캐시 계층 구조에서 STT-RAM을 활용하는 방법을 제안하였다. 배타적 캐시 계층 구조는 계층 간에 중복된 데이터가 없기 때문에 포함적 캐시 계층 구조와 비교하여 더 큰 유효 용량을 갖지만, 배타적 캐시 계층 구조에서는 상위 레벨 캐시에서 내보내진 모든 데이터를 하위 레벨 캐시에 써야 하므로 더 많은 양의 데이터를 쓰게 된다. 이러한 배타적 캐시 계층 구조의 특성은 쓰기 특성이 단점인 STT-RAM을 함께 활용하는 것을 어렵게 한다. 이를 해결하기 위해 본 논문에서는 재사용 거리 예측을 기반으로 하는 SRAM/STT-RAM 하이브리드 캐시 구조를 설계하였다. 두 번째, 비휘발성 STT-RAM을 이용해 캐시를 설계할 때 고려해야 할 점들에 대해 분석하였다. STT-RAM의 비효율적인 쓰기 동작을 줄이기 위해 다양한 해결법들이 제안되었다. 그중 한 가지는 STT-RAM 소자가 데이터를 유지하는 시간을 줄여 (휘발성 STT-RAM) 쓰기 특성을 향상하는 방법이다. STT-RAM에 저장된 데이터를 잃는 것은 확률적으로 발생하기 때문에 저장된 데이터를 안정적으로 유지하기 위해서는 오류 정정 부호(ECC)를 이용해 주기적으로 오류를 정정해주어야 한다. 본 논문에서는 STT-RAM 모델을 이용하여 휘발성 STT-RAM 설계 요소들에 대해 분석하였고 실험을 통해 해당 설계 요소들이 캐시 에너지와 성능에 주는 영향을 보여주었다. 마지막으로, 매니코어 시스템에서의 분산 하이브리드 캐시 구조를 설계하였다. 단순히 기존의 하이브리드 캐시와 분산캐시를 결합하면 하이브리드 캐시의 효율성에 큰 영향을 주는 SRAM 활용도가 낮아진다. 따라서 기존의 하이브리드 캐시 구조에서의 에너지 감소를 기대할 수 없다. 본 논문에서는 분산 하이브리드 캐시 구조에서 SRAM 활용도를 높일 수 있는 두 가지 최적화 기술인 뱅크-내부 최적화와 뱅크간 최적화 기술을 제안하였다. 뱅크-내부 최적화는 highly-associative 캐시를 활용하여 뱅크 내부에서 쓰기 동작이 많은 데이터를 분산시키는 것이고 뱅크간 최적화는 서로 다른 캐시 뱅크에 쓰기 동작이 많은 데이터를 고르게 분산시키는 최적화 방법이다.Over the last decade, the capacity of on-chip cache is continuously increased to mitigate the memory wall problem. However, SRAM, which is a dominant memory technology for caches, is not suitable for such a large cache because of its low density and large static power. One way to mitigate these downsides of the SRAM cache is replacing SRAM with a more efficient memory technology. Spin-Transfer Torque RAM (STT-RAM), one of the emerging memory technology, is a promising candidate for the alternative of SRAM. As a substitute of SRAM, STT-RAM can compensate drawbacks of SRAM with its non-volatility and small cell size. However, STT-RAM has poor write characteristics such as high write energy and long write latency and thus simply replacing SRAM to STT-RAM increases cache energy. To overcome those poor write characteristics of STT-RAM, this dissertation explores three different design techniques for energy-efficient cache using STT-RAM. The first part of the dissertation focuses on combining STT-RAM with exclusive cache hierarchy. Exclusive caches are known to provide higher effective cache capacity than inclusive caches by removing duplicated copies of cache blocks across hierarchies. However, in exclusive cache hierarchies, every block evicted from the upper-level cache is written back to the last-level cache regardless of its dirtiness thereby incurring extra write overhead. This makes it challenging to use STT-RAM for exclusive last-level caches due to its high write energy and long write latency. To mitigate this problem, we design an SRAM/STT-RAM hybrid cache architecture based on reuse distance prediction. The second part of the dissertation explores trade-offs in the design of volatile STT-RAM cache. Due to the inefficient write operation of STT-RAM, various solutions have been proposed to tackle this inefficiency. One of the proposed solutions is redesigning STT-RAM cell for better write characteristics at the cost of shortened retention time (i.e., volatile STT-RAM). Since the retention failure of STT-RAM has a stochastic property, an extra overhead of periodic scrubbing with error correcting code (ECC) is required to tolerate the failure. With an analysis based on analytic STT-RAM model, we have conducted extensive experiments on various volatile STT-RAM cache design parameters including scrubbing period, ECC strength, and target failure rate. The experimental results show the impact of the parameter variations on last-level cache energy and performance and provide a guideline for designing a volatile STT-RAM with ECC and scrubbing. The last part of the dissertation proposes Benzene, an energy-efficient distributed SRAM/STT-RAM hybrid cache architecture for manycore systems running multiple applications. It is based on the observation that a naive application of hybrid cache techniques to distributed caches in a manycore architecture suffers from limited energy reduction due to uneven utilization of scarce SRAM. We propose two-level optimization techniques: intra-bank and inter-bank. Intra-bank optimization leverages highly-associative cache design, achieving more uniform distribution of writes within a bank. Inter-bank optimization evenly balances the amount of write-intensive data across the banks.Abstract i Contents iii List of Figures vii List of Tables xi Chapter 1 Introduction 1 1.1 Exclusive Last-Level Hybrid Cache 2 1.2 Designing Volatile STT-RAM Cache 4 1.3 Distributed Hybrid Cache 5 Chapter 2 Background 9 2.1 STT-RAM 9 2.1.1 Thermal Stability 10 2.1.2 Read and Write Operation of STT-RAM 11 2.1.3 Failures of STT-RAM 11 2.1.4 Volatile STT-RAM 13 2.1.5 Related Work 14 2.2 Exclusive Last-Level Hybrid Cache 18 2.2.1 Cache Hierarchies 18 2.2.2 Related Work 19 2.3 Distributed Hybrid Cache 21 2.3.1 Prediction Hybrid Cache 21 2.3.2 Distributed Cache Partitioning 22 2.3.3 Related Work 23 Chapter 3 Exclusive Last-Level Hybrid Cache 27 3.1 Motivation 27 3.1.1 Exclusive Cache Hierarchy 27 3.1.2 Reuse Distance 29 3.2 Architecture 30 3.2.1 Reuse Distance Predictor 30 3.2.2 Hybrid Cache Architecture 32 3.3 Evaluation 34 3.3.1 Methodology 34 3.3.2 LLC Energy Consumption 35 3.3.3 Main Memory Energy Consumption 38 3.3.4 Performance 39 3.3.5 Area Overhead 39 3.4 Summary 39 Chapter 4 Designing Volatile STT-RAM Cache 41 4.1 Analysis 41 4.1.1 Retention Failure of a Volatile STT-RAM Cell 41 4.1.2 Memory Array Design 43 4.2 Evaluation 45 4.2.1 Methodology 45 4.2.2 Last-Level Cache Energy 46 4.2.3 Performance 51 4.3 Summary 52 Chapter 5 Distributed Hybrid Cache 55 5.1 Motivation 55 5.2 Architecture 58 5.2.1 Intra-Bank Optimization 59 5.2.2 Inter-Bank Optimization 63 5.2.3 Other Optimizations 67 5.3 Evaluation Methodology 69 5.4 Evaluation Results 73 5.4.1 Energy Consumption and Performance 73 5.4.2 Analysis of Intra-bank Optimization 76 5.4.3 Analysis of Inter-bank Optimization 78 5.4.4 Impact of Inter-Bank Optimization on Network Energy 79 5.4.5 Sensitivity Analysis 80 5.4.6 Implementation Overhead 81 5.5 Summary 82 Chapter 6 Conculsion 85 Bibliography 88 초록 101Docto