1,425 research outputs found
Software Defined Radio Implementation of Carrier and Timing Synchronization for Distributed Arrays
The communication range of wireless networks can be greatly improved by using
distributed beamforming from a set of independent radio nodes. One of the key
challenges in establishing a beamformed communication link from separate radios
is achieving carrier frequency and sample timing synchronization. This paper
describes an implementation that addresses both carrier frequency and sample
timing synchronization simultaneously using RF signaling between designated
master and slave nodes. By using a pilot signal transmitted by the master node,
each slave estimates and tracks the frequency and timing offset and digitally
compensates for them. A real-time implementation of the proposed system was
developed in GNU Radio and tested with Ettus USRP N210 software defined radios.
The measurements show that the distributed array can reach a residual frequency
error of 5 Hz and a residual timing offset of 1/16 the sample duration for 70
percent of the time. This performance enables distributed beamforming for range
extension applications.Comment: Submitted to 2019 IEEE Aerospace Conferenc
Doctor of Philosophy
dissertationLow-cost wireless embedded systems can make radio channel measurements for the purposes of radio localization, synchronization, and breathing monitoring. Most of those systems measure the radio channel via the received signal strength indicator (RSSI), which is widely available on inexpensive radio transceivers. However, the use of standard RSSI imposes multiple limitations on the accuracy and reliability of such systems; moreover, higher accuracy is only accessible with very high-cost systems, both in bandwidth and device costs. On the other hand, wireless devices also rely on synchronized notion of time to coordinate tasks (transmit, receive, sleep, etc.), especially in time-based localization systems. Existing solutions use multiple message exchanges to estimate time offset and clock skew, which further increases channel utilization. In this dissertation, the design of the systems that use RSSI for device-free localization, device-based localization, and breathing monitoring applications are evaluated. Next, the design and evaluation of novel wireless embedded systems are introduced to enable more fine-grained radio signal measurements to the application. I design and study the effect of increasing the resolution of RSSI beyond the typical 1 dB step size, which is the current standard, with a couple of example applications: breathing monitoring and gesture recognition. Lastly, the Stitch architecture is then proposed to allow the frequency and time synchronization of multiple nodes' clocks. The prototype platform, Chronos, implements radio frequency synchronization (RFS), which accesses complex baseband samples from a low-power low-cost narrowband radio, estimates the carrier frequency offset, and iteratively drives the difference between two nodes' main local oscillators (LO) to less than 3 parts per billion (ppb). An optimized time synchronization and ranging protocols (EffToF) is designed and implemented to achieve the same timing accuracy as the state-of-the-art but with 59% less utilization of the UWB channel. Based on this dissertation, I could foresee Stitch and RFS further improving the robustness of communications infrastructure to GPS jamming, allow exploration of applications such as distributed beamforming and MIMO, and enable new highly-synchronous wireless sensing and actuation systems
MEDUSA: Scalable Biometric Sensing in the Wild through Distributed MIMO Radars
Radar-based techniques for detecting vital signs have shown promise for
continuous contactless vital sign sensing and healthcare applications. However,
real-world indoor environments face significant challenges for existing vital
sign monitoring systems. These include signal blockage in non-line-of-sight
(NLOS) situations, movement of human subjects, and alterations in location and
orientation. Additionally, these existing systems failed to address the
challenge of tracking multiple targets simultaneously. To overcome these
challenges, we present MEDUSA, a novel coherent ultra-wideband (UWB) based
distributed multiple-input multiple-output (MIMO) radar system, especially it
allows users to customize and disperse the into sub-arrays.
MEDUSA takes advantage of the diversity benefits of distributed yet wirelessly
synchronized MIMO arrays to enable robust vital sign monitoring in real-world
and daily living environments where human targets are moving and surrounded by
obstacles. We've developed a scalable, self-supervised contrastive learning
model which integrates seamlessly with our hardware platform. Each attention
weight within the model corresponds to a specific antenna pair of Tx and Rx.
The model proficiently recovers accurate vital sign waveforms by decomposing
and correlating the mixed received signals, including comprising human motion,
mobility, noise, and vital signs. Through extensive evaluations involving 21
participants and over 200 hours of collected data (3.75 TB in total, with 1.89
TB for static subjects and 1.86 TB for moving subjects), MEDUSA's performance
has been validated, showing an average gain of 20% compared to existing systems
employing COTS radar sensors. This demonstrates MEDUSA's spatial diversity gain
for real-world vital sign monitoring, encompassing target and environmental
dynamics in familiar and unfamiliar indoor environments.Comment: Preprint. Under Revie
Supporting Cyber-Physical Systems with Wireless Sensor Networks: An Outlook of Software and Services
Sensing, communication, computation and control technologies are the essential building blocks of a cyber-physical system (CPS). Wireless sensor networks (WSNs) are a way to support CPS as they provide fine-grained spatial-temporal sensing, communication and computation at a low premium of cost and power. In this article, we explore the fundamental concepts guiding the design and implementation of WSNs. We report the latest developments in WSN software and services for meeting existing requirements and newer demands; particularly in the areas of: operating system, simulator and emulator, programming abstraction, virtualization, IP-based communication and security, time and location, and network monitoring and management. We also reflect on the ongoing
efforts in providing dependable assurances for WSN-driven CPS. Finally, we report on its applicability with a case-study on smart buildings
Energy-Efficient Boarder Node Medium Access Control Protocol for Wireless Sensor Networks
This paper introduces the design, implementation, and performance analysis of the scalable and mobility-aware hybrid protocol named boarder node medium access control (BN-MAC) for wireless sensor networks (WSNs), which leverages the characteristics of scheduled and contention-based MAC protocols. Like contention-based MAC protocols, BN-MAC achieves high channel utilization, network adaptability under heavy traffic and mobility, and low latency and overhead. Like schedule-based MAC protocols, BN-MAC reduces idle listening time, emissions, and collision handling at low cost at one-hop neighbor nodes and achieves high channel utilization under heavy network loads. BN-MAC is particularly designed for region-wise WSNs. Each region is controlled by a boarder node (BN), which is of paramount importance. The BN coordinates with the remaining nodes within and beyond the region. Unlike other hybrid MAC protocols, BN-MAC incorporates three promising models that further reduce the energy consumption, idle listening time, overhearing, and congestion to improve the throughput and reduce the latency. One of the models used with BN-MAC is automatic active and sleep (AAS), which reduces the ideal listening time. When nodes finish their monitoring process, AAS lets them automatically go into the sleep state to avoid the idle listening state. Another model used in BN-MAC is the intelligent decision-making (IDM) model, which helps the nodes sense the nature of the environment. Based on the nature of the environment, the nodes decide whether to use the active or passive mode. This decision power of the nodes further reduces energy consumption because the nodes turn off the radio of the transceiver in the passive mode. The third model is the least-distance smart neighboring search (LDSNS), which determines the shortest efficient path to the one-hop neighbor and also provides cross-layering support to handle the mobility of the nodes. The BN-MAC also incorporates a semi-synchronous feature with a low duty cycle, which is advantageous for reducing the latency and energy consumption for several WSN application areas to improve the throughput. BN-MAC uses a unique window slot size to enhance the contention resolution issue for improved throughput. BN-MAC also prefers to communicate within a one-hop destination using Anycast, which maintains load balancing to maintain network reliability. BN-MAC is introduced with the goal of supporting four major application areas: monitoring and behavioral areas, controlling natural disasters, human-centric applications, and tracking mobility and static home automation devices from remote places. These application areas require a congestion-free mobility-supported MAC protocol to guarantee reliable data delivery. BN-MAC was evaluated using network simulator-2 (ns2) and compared with other hybrid MAC protocols, such as Zebra medium access control (Z-MAC), advertisement-based MAC (A-MAC), Speck-MAC, adaptive duty cycle SMAC (ADC-SMAC), and low-power real-time medium access control (LPR-MAC). The simulation results indicate that BN-MAC is a robust and energy-efficient protocol that outperforms other hybrid MAC protocols in the context of quality of service (QoS) parameters, such as energy consumption, latency, throughput, channel access time, successful delivery rate, coverage efficiency, and average duty cycle.https://doi.org/10.3390/s14030507
Role of Reconfigurable Intelligent Surfaces in 6G Radio Localization: Recent Developments, Opportunities, Challenges, and Applications
Reconfigurable intelligent surfaces (RISs) are seen as a key enabler low-cost
and energy-efficient technology for 6G radio communication and localization. In
this paper, we aim to provide a comprehensive overview of the current research
progress on the RIS technology in radio localization for 6G. Particularly, we
discuss the RIS-assisted radio localization taxonomy and review the studies of
RIS-assisted radio localization for different network scenarios, bands of
transmission, deployment environments, as well as near-field operations. Based
on this review, we highlight the future research directions, associated
technical challenges, real-world applications, and limitations of RIS-assisted
radio localization
- …