Shift factor-based SCOPF topology control MIP formulations with substation configurations

Topology control (TC) is an effective tool for managing congestion, contingency events, and overload control. The majority of TC research has focused on line and transformer switching. Substation reconfiguration is an additional TC action, which consists of opening or closing breakers not in series with lines or transformers. Some reconfiguration actions can be simpler to implement than branch opening, seen as a less invasive action. This paper introduces two formulations that incorporate substation reconfiguration with branch opening in a unified TC framework. The first method starts from a topology with all candidate breakers open, and breaker closing is emulated and optimized using virtual transactions. The second method takes the opposite approach, starting from a fully closed topology and optimizing breaker openings. We provide a theoretical framework for both methods and formulate security-constrained shift factor MIP TC formulations that incorporate both breaker and branch switching. By maintaining the shift factor formulation, we take advantage of its compactness, especially in the context of contingency constraints, and by focusing on reconfiguring substations, we hope to provide system operators additional flexibility in their TC decision processes. Simulation results on a subarea of PJM illustrate the application of the two formulations to realistic systems.The work was supported in part by the Advanced Research Projects Agency-Energy, U.S. Department of Energy, under Grant DE-AR0000223 and in part by the U.S. National Science Foundation Emerging Frontiers in Research and Innovation under Grant 1038230. Paper no. TPWRS-01497-2015. (DE-AR0000223 - Advanced Research Projects Agency-Energy, U.S. Department of Energy; 1038230 - U.S. National Science Foundation Emerging Frontiers in Research and Innovation)http://buprimo.hosted.exlibrisgroup.com/primo_library/libweb/action/openurl?date=2017&issue=2&isSerivcesPage=true&spage=1179&dscnt=2&url_ctx_fmt=null&vid=BU&volume=32&institution=bosu&issn=0885-8950&id=doi:10.1109/TPWRS.2016.2574324&dstmp=1522778516872&fromLogin=truePublished versio

Emerging technologies and future trends in substation automation systems for the protection, monitoring and control of electrical substations

Tese de Mestrado Integrado. Engenharia Electrotécnica e de Computadores (Automação). Faculdade de Engenharia. Universidade do Porto. 201

User flexibility aware price policy synthesis for smart grids

In order to optimally manage a modern electricity distribution network, peaks in residential users demand should be avoided, as this can reduce energy and network asset management costs. Furthermore, this must be done without compressing residential users demand. To this aim, in a demand response setting, residential users are given a price policy, which economically motivates them to shift their loads in order to achieve this goal. However, if the price policy for all users is similar, this demand response may result in simply shifting the demand peaks (peak rebound), leaving the problem unsolved. In this paper we propose a novel methodology which i) for each network substation s, automatically computes the desired power profile to be kept in order to optimally manage the network itself, ii) for each network substation s, automatically synthesizes individualized price policies for residential users connected to s, so that s is kept at the desired profile. Note that price policies individualization avoids the peak rebound problem, as different users have different low tariff areas. Furthermore, our methodology measures the flexibility of a residential user as the capacity needed by a home energy storage system (e.g., a battery) to always follow the given price policy, thus mitigating residential users discomfort. We show the feasibility of our approach on a realistic scenario taken from an existing medium voltage Danish distribution network

Software Defined Networks based Smart Grid Communication: A Comprehensive Survey

The current power grid is no longer a feasible solution due to ever-increasing user demand of electricity, old infrastructure, and reliability issues and thus require transformation to a better grid a.k.a., smart grid (SG). The key features that distinguish SG from the conventional electrical power grid are its capability to perform two-way communication, demand side management, and real time pricing. Despite all these advantages that SG will bring, there are certain issues which are specific to SG communication system. For instance, network management of current SG systems is complex, time consuming, and done manually. Moreover, SG communication (SGC) system is built on different vendor specific devices and protocols. Therefore, the current SG systems are not protocol independent, thus leading to interoperability issue. Software defined network (SDN) has been proposed to monitor and manage the communication networks globally. This article serves as a comprehensive survey on SDN-based SGC. In this article, we first discuss taxonomy of advantages of SDNbased SGC.We then discuss SDN-based SGC architectures, along with case studies. Our article provides an in-depth discussion on routing schemes for SDN-based SGC. We also provide detailed survey of security and privacy schemes applied to SDN-based SGC. We furthermore present challenges, open issues, and future research directions related to SDN-based SGC.Comment: Accepte

Communications for smart grid substation monitoring using WIMAX protocol

The SMARTGRID is a general term for a series of infrastructural changes applied to the electric transmission and distribution systems. By using the latest communication and computing technology, additional options such as Condition Monitoring can now be implemented to further improve and optimise complex electricity supply grid operation. Lifecycle optimisation of high voltage assets and other system components in the utility provide a case in point. Today Utility experts agree that application of scheduled maintenance is not the effective use of resources. To reduce maintenance expenses and unnecessary outages and repairs of equipment due to scheduled maintenance, utilities are adopting condition based approaches. Real time online monitoring of substation parameters can be achieved by retrofitting the existing substation with SMARTGRID technology. The IEC 61850 is a common protocol meant for Substation Automation Systems, designed for the purpose of establishing interoperability, one that all manufacturers of all different assets must comply with. This thesis advocates the estimation of bandwidth required for monitoring a substation after retrofitting the existing substation with smart communication technologies. This includes establishing a latest wireless communication infrastructure from the substation to the control centre and evaluating the performance modelling and simulating the physical layer of communication technologies such as WIMAX (IEEE802.16) and MICROWAVE point to point using MATLAB SIMULINK and RADIO mobile online simulation software. Also, link budget of the satellite communication for the same application is calculated. Satellite communication in this case is considered as a redundant or back up technology to ensure that the communication between entities is continuous. On performing the simulation on different environments the results prove that the selected protocols are best suited for condition monitoring. The measured Latency could be the best approximated value which complies with the current objective. However the white noise that exists in the substation has significant hazard with respect to the security of the wireless network. To compensate this constraint whole substation is hard wired by means of plastic fibre optics and the data sent to the base station located near the substation

Novel performance evaluation of information and communication technologies to enable wide area monitoring systems for enhanced transmission network operation

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University London.The penetration of renewable energy sources has increased significantly in recent years due to the ongoing depletion of conventional resources and the transition to a low carbon energy system. Renewable energy sources such as wind energy are highly intermittent and unpredictable in nature, which makes the operation of the power grid more dynamic and therefore more complex. In order to operate the power system reliably under such conditions, Phasor Measurement Units (PMUs) through the use of satellite technology can offer a state-of-the-art Wide Area Monitoring System (WAMS) for improving power system monitoring, control and protection. They can improve the operation by providing highly precise and synchronised measurements near to real-time with higher frequency and accuracy. In order to achieve such objectives, a high-speed and reliable communications infrastructure is required to transfer time-critical PMU data from remote locations to the control centre. The signals measured by PMUs are transmitted across Local and Wide Area Networks, where they may encounter excessive delays. Signal delays can have a disruptive effect and make applications at best inefficient and at worse ineffective. The main research contribution of this thesis is the performance evaluation of communication infrastructures for WAMS. The evaluation begins from inside substations and continues over wide areas from substations to control centre. Through laboratory-based investigations and simulations, the performance of communications infrastructure in a typical power system substation has been analysed. In addition, the performance evaluation of WAMS communications infrastructure has been presented. In the modelling and analysis, an existing WAMS as installed on the GB transmission system has been considered. The actual PMU packets as received at the Phasor Data Concentrator (PDC) were captured for latency analysis. A novel algorithmic procedure has been developed and implemented to automate the large-scale latency calculations. Furthermore, the internal delays of PMUs have been investigated, determined and analysed. Subsequently, the WAMS has been simulated and detailed comparisons have been performed between the simulated model results and WAMS performance data captured from the actual WAMS. The validated WAMS model has been used for analysing possible future developments as well as to test newly proposed mechanisms, protocols, etc. in order to improve the communications infrastructure performance

FAULT IDENTIFICATION ON ELECTRICAL TRANSMISSION LINES USING ARTIFICIAL NEURAL NETWORKS

Transmission lines are designed to transport large amounts of electrical power from the point of generation to the point of consumption. Since transmission lines are built to span over long distances, they are frequently exposed to many different situations that can cause abnormal conditions known as electrical faults. Electrical faults, when isolated, can cripple the transmission system as power flows are directed around these faults therefore leading to other numerous potential issues such as thermal and voltage violations, customer interruptions, or cascading events. When faults occur, protection systems installed near the faulted transmission lines will isolate these faults from the transmission system as quickly as possible. Accurate fault location is essential in reducing outage times and enhancing system reliability. Repairing these faulted elements and restoring the transmission lines to service quickly is highly important since outages can create congestion in other parts of the transmission grid, therefore making them more vulnerable to additional outages. Therefore, identifying the classification and location of these faults as quickly and accurately as possible is crucial. Diverse fault location methods exist and have different strengths and weaknesses. This research aims to investigate the use of an intelligent technique based on artificial neural networks. The neural networks will attempt to determine the fault classification and precise fault location. Different fault cases are analyzed on multiple transmission line configurations using various phasor measurement arrangements from the two substations connecting the transmission line. These phasor measurements will be used as inputs into the artificial neural network. The transmission system configurations studied in this research are the two-terminal single and parallel transmission lines. Power flows studied in this work are left static, but multiple sets of fault resistances will be tested at many points along the transmission line. Since any fault that occurs on the transmission system may never experience the same fault resistance or fault location, fault data was collected that relates to different scenarios of fault resistances and fault locations. In order to analyze how many different fault resistance and fault location scenarios need to be collected to allow accurate neural network predictions, multiple sets of fault data were collected. The multiple sets of fault data contain phasor measurements with different sets of fault resistance and fault location combinations. Having the multiple sets of fault data help determine how well the neural networks can predict the fault identification based on more training data. There has been a lack of guidelines on designing the architecture for artificial neural network structures including the number of hidden layers and the number of neurons in each hidden layer. This research will fill this gap by providing insights on choosing effective neural network structures for fault classification and location applications

Internet of Things-aided Smart Grid: Technologies, Architectures, Applications, Prototypes, and Future Research Directions

Traditional power grids are being transformed into Smart Grids (SGs) to address the issues in existing power system due to uni-directional information flow, energy wastage, growing energy demand, reliability and security. SGs offer bi-directional energy flow between service providers and consumers, involving power generation, transmission, distribution and utilization systems. SGs employ various devices for the monitoring, analysis and control of the grid, deployed at power plants, distribution centers and in consumers' premises in a very large number. Hence, an SG requires connectivity, automation and the tracking of such devices. This is achieved with the help of Internet of Things (IoT). IoT helps SG systems to support various network functions throughout the generation, transmission, distribution and consumption of energy by incorporating IoT devices (such as sensors, actuators and smart meters), as well as by providing the connectivity, automation and tracking for such devices. In this paper, we provide a comprehensive survey on IoT-aided SG systems, which includes the existing architectures, applications and prototypes of IoT-aided SG systems. This survey also highlights the open issues, challenges and future research directions for IoT-aided SG systems

Comparison Between Ring and Radial Configurations of the University of Trieste Campus MV Distribution Grid

Distribution systems are being pushed towards smarter architectures, management strategies, and controls. To develop new platforms and algorithms for distribution systems management, the University of Trieste is using its medium voltage MW-scale ring distribution system as a demonstrator. In addition to the installation of a real-time monitoring system, power system studies and analyses are required. The paper presents and compares some results concerning the power system operation in both closed (normal operation) and open (post fault operation) configurations, where the latter are identified by means of a quantitative dependability analysis. In particular, the voltage profile, the currents, and the losses in the system are studied, evaluating the impact of faults capable of opening the ring