Design and analysis of a scalable terabit multicast packet switch : architecture and scheduling algorithms

Internet growth and success not only open a primary route of information exchange for millions of people around the world, but also create unprecedented demand for core network capacity. Existing switches/routers, due to the bottleneck from either switch architecture or arbitration complexity, can reach a capacity on the order of gigabits per second, but few of them are scalable to large capacity of terabits per second. In this dissertation, we propose three novel switch architectures with cooperated scheduling algorithms to design a terabit backbone switch/router which is able to deliver large capacity, multicasting, and high performance along with Quality of Service (QoS). Our switch designs benefit from unique features of modular switch architecture and distributed resource allocation scheme. Switch I is a unique and modular design characterized by input and output link sharing. Link sharing resolves output contention and eliminates speedup requirement for central switch fabric. Hence, the switch architecture is scalable to any large size. We propose a distributed round robin (RR) scheduling algorithm which provides fairness and has very low arbitration complexity. Switch I can achieve good performance under uniform traffic. However, Switch I does not perform well for non-uniform traffic. Switch II, as a modified switch design, employs link sharing as well as a token ring to pursue a solution to overcome the drawback of Switch 1. We propose a round robin prioritized link reservation (RR+POLR) algorithm which results in an improved performance especially under non-uniform traffic. However, RR+POLR algorithm is not flexible enough to adapt to the input traffic. In Switch II, the link reservation rate has a great impact on switch performance. Finally, Switch III is proposed as an enhanced switch design using link sharing and dual round robin rings. Packet forwarding is based on link reservation. We propose a queue occupancy based dynamic link reservation (QOBDLR) algorithm which can adapt to the input traffic to provide a fast and fair link resource allocation. QOBDLR algorithm is a distributed resource allocation scheme in the sense that dynamic link reservation is carried out according to local available information. Arbitration complexity is very low. Compared to the output queued (OQ) switch which is known to offer the best performance under any traffic pattern, Switch III not only achieves performance as good as the OQ switch, but also overcomes speedup problem which seriously limits the OQ switch to be a scalable switch design. Hence, Switch III would be a good choice for high performance, scalable, large-capacity core switches

Concentrators in ATM switching.

by Lau Chu Man.Thesis (M.Phil.)--Chinese University of Hong Kong, 1995.Includes bibliographical references (leaves 76-83).Chapter 1 --- Introduction --- p.1Chapter 2 --- Basic Notions --- p.13Chapter 3 --- Fast Knockout --- p.19Chapter 3.1 --- The Algorithm of Fast Knockout --- p.20Chapter 3.2 --- Complexity of the Fast Knockout Algorithm --- p.29Chapter 3.3 --- Summary --- p.35Chapter 4 --- k-Sortout --- p.36Chapter 4.1 --- A Brief Review of k-Sorting --- p.37Chapter 4.2 --- The Algorithm of k-Sortout --- p.47Chapter 4.3 --- Complexity of the k- Sortout Algorithm --- p.53Chapter 4.4 --- Summary --- p.58Chapter 5 --- General Sortout --- p.59Chapter 5.1 --- The General Algorithm of Sortout --- p.59Chapter 5.2 --- Complexity of Concentrators by the General Algorithm --- p.64Chapter 5.3 --- Summary --- p.69Chapter 6 --- Concluding Remarks --- p.70Chapter 6.1 --- Summary of Results --- p.70Chapter 6.2 --- Directions for Further Research --- p.73Bibliography --- p.7

Load balancing and scalable clos-network packet switches

In this dissertation three load-balancing Clos-network packet switches that attain 100% throughput and forward cells in sequence are introduced. The configuration schemes and the in-sequence forwarding mechanisms devised for these switches are also introduced. Also proposed is the use of matrix analysis as a tool for throughput analysis. In Chapter 2, a configuration scheme for a load-balancing Clos-network packet switch that has split central modules and buffers in between the split modules is introduced. This switch is called split-central-buffered Load-Balancing Clos-network (LBC) switch and it is cell based. The switch has four stages, namely input, central-input, central-output, and output stages. The proposed configuration scheme uses a pre-determined and periodic interconnection pattern in the input and split central modules to load-balance and route traffic. The LBC switch has low configuration complexity. The operation of the switch includes a mechanism applied at input and split-central modules to forward cells in sequence. The switch achieves 100% throughput under uniform and nonuniform admissible traffic with independent and identical distributions (i.i.d.). The high switching performance and low complexity of the switch are achieved while performing in-sequence forwarding and without resorting to memory speedup or central-stage expansion. This discussion includes both throughput analysis, where the operations that the configuration mechanism performs on the traffic traversing the switch are described, and a proof of in-sequence forwarding. Simulation analysis is presented as a practical demonstration of the switch performance on uniform and nonuniform i.i.d. traffic.In Chapter 3, a three-stage load balancing packet switch and its configuration scheme are introduced. The input- and central-stage switches are bufferless crossbars and the output-stage switches are buffered crossbars. This switch is called ThRee-stage Clos-network swItch and has queues at the middle stage and DEtermiNisTic scheduling (TRIDENT) and it is cell based. The proposed configuration scheme uses a pre-determined and periodic interconnection pattern in the input and central modules to load-balance and route traffic; therefore, it has low configuration complexity. The operation of the switch includes a mechanism applied at input and output modules to forward cells in sequence. In Chapter 4, a highly scalable load balancing three-stage Clos-network switch with Virtual Input-module output queues at ceNtral stagE (VINE) and crosspoint-buffers at output modules and its configuration scheme are introduced. VINE uses space switching in the first stage and buffered crossbars in the second and third stages. The proposed configuration scheme uses pre-determined and periodic interconnection patterns in the input modules for load balancing. The mechanism applied at the inputs, used to forward cells in sequence, is also introduced. VINE achieves 100% throughput under uniform and nonuniform admissible i.i.d. traffic. VINE achieves high switching performance, low configuration complexity, and in-sequence forwarding without resorting to memory speedup. In Chapter 5, matrix analysis is introduced as a tool for modeling, describing the internal operations, and analyzing the throughput of a packet switch

Switching techniques for broadband ISDN

The properties of switching techniques suitable for use in broadband networks have been investigated. Methods for evaluating the performance of such switches have been reviewed. A notation has been introduced to describe a class of binary self-routing networks. Hence a technique has been developed for determining the nature of the equivalence between two networks drawn from this class. The necessary and sufficient condition for two packets not to collide in a binary self-routing network has been obtained. This has been used to prove the non-blocking property of the Batcher-banyan switch. A condition for a three-stage network with channel grouping and link speed-up to be nonblocking has been obtained, of which previous conditions are special cases. A new three-stage switch architecture has been proposed, based upon a novel cell-level algorithm for path allocation in the intermediate stage of the switch. The algorithm is suited to hardware implementation using parallelism to achieve a very short execution time. An array of processors is required to implement the algorithm The processor has been shown to be of simple design. It must be initialised with a count representing the number of cells requesting a given output module. A fast method has been described for performing the request counting using a non-blocking binary self-routing network. Hardware is also required to forward routing tags from the processors to the appropriate data cells, when they have been allocated a path through the intermediate stage. A method of distributing these routing tags by means of a non-blocking copy network has been presented. The performance of the new path allocation algorithm has been determined by simulation. The rate of cell loss can increase substantially in a three-stage switch when the output modules are non-uniformly loaded. It has been shown that the appropriate use of channel grouping in the intermediate stage of the switch can reduce the effect of non-uniform loading on performance

A formalism for describing and simulating systems with interacting components.

This thesis addresses the problem of descriptive complexity presented by systems involving a high number of interacting components. It investigates the evaluation measure of performability and its application to such systems. A new description and simulation language, ICE and it's application to performability modelling is presented. ICE (Interacting ComponEnts) is based upon an earlier description language which was first proposed for defining reliability problems. ICE is declarative in style and has a limited number of keywords. The ethos in the development of the language has been to provide an intuitive formalism with a powerful descriptive space. The full syntax of the language is presented with discussion as to its philosophy. The implementation of a discrete event simulator using an ICE interface is described, with use being made of examples to illustrate the functionality of the code and the semantics of the language. Random numbers are used to provide the required stochastic behaviour within the simulator. The behaviour of an industry standard generator within the simulator and different methods of number allocation are shown. A new generator is proposed that is a development of a fast hardware shift register generator and is demonstrated to possess good statistical properties and operational speed. For the purpose of providing a rigorous description of the language and clarification of its semantics, a computational model is developed using the formalism of extended coloured Petri nets. This model also gives an indication of the language's descriptive power relative to that of a recognised and well developed technique. Some recognised temporal and structural problems of system event modelling are identified. and ICE solutions given. The growing research area of ATM communication networks is introduced and a sophisticated top down model of an ATM switch presented. This model is simulated and interesting results are given. A generic ICE framework for performability modelling is developed and demonstrated. This is considered as a positive contribution to the general field of performability research