3,563 research outputs found
An indoor variance-based localization technique utilizing the UWB estimation of geometrical propagation parameters
A novel localization framework is presented based on ultra-wideband (UWB) channel sounding, employing a triangulation method using the geometrical properties of propagation paths, such as time delay of arrival, angle of departure, angle of arrival, and their estimated variances. In order to extract these parameters from the UWB sounding data, an extension to the high-resolution RiMAX algorithm was developed, facilitating the analysis of these frequency-dependent multipath parameters. This framework was then tested by performing indoor measurements with a vector network analyzer and virtual antenna arrays. The estimated means and variances of these geometrical parameters were utilized to generate multiple sample sets of input values for our localization framework. Next to that, we consider the existence of multiple possible target locations, which were subsequently clustered using a Kim-Parks algorithm, resulting in a more robust estimation of each target node. Measurements reveal that our newly proposed technique achieves an average accuracy of 0.26, 0.28, and 0.90 m in line-of-sight (LoS), obstructed-LoS, and non-LoS scenarios, respectively, and this with only one single beacon node. Moreover, utilizing the estimated variances of the multipath parameters proved to enhance the location estimation significantly compared to only utilizing their estimated mean values
Dispensing with channel estimation: differentially modulated cooperative wireless communications
As a benefit of bypassing the potentially excessive complexity and yet inaccurate channel estimation, differentially encoded modulation in conjunction with low-complexity noncoherent detection constitutes a viable candidate for user-cooperative systems, where estimating all the links by the relays is unrealistic. In order to stimulate further research on differentially modulated cooperative systems, a number of fundamental challenges encountered in their practical implementations are addressed, including the time-variant-channel-induced performance erosion, flexible cooperative protocol designs, resource allocation as well as its high-spectral-efficiency transceiver design. Our investigations demonstrate the quantitative benefits of cooperative wireless networks both from a pure capacity perspective as well as from a practical system design perspective
Optimal Multiuser Transmit Beamforming: A Difficult Problem with a Simple Solution Structure
Transmit beamforming is a versatile technique for signal transmission from an
array of antennas to one or multiple users [1]. In wireless communications,
the goal is to increase the signal power at the intended user and reduce
interference to non-intended users. A high signal power is achieved by
transmitting the same data signal from all antennas, but with different
amplitudes and phases, such that the signal components add coherently at the
user. Low interference is accomplished by making the signal components add
destructively at non-intended users. This corresponds mathematically to
designing beamforming vectors (that describe the amplitudes and phases) to have
large inner products with the vectors describing the intended channels and
small inner products with non-intended user channels.
While it is fairly easy to design a beamforming vector that maximizes the
signal power at the intended user, it is difficult to strike a perfect balance
between maximizing the signal power and minimizing the interference leakage. In
fact, the optimization of multiuser transmit beamforming is generally a
nondeterministic polynomial-time (NP) hard problem [2]. Nevertheless, this
lecture shows that the optimal transmit beamforming has a simple structure with
very intuitive properties and interpretations. This structure provides a
theoretical foundation for practical low-complexity beamforming schemes.
(See this lecture note for the complete abstract/introduction)Comment: Accepted for publication as lecture note in IEEE Signal Processing
Magazine, 11 pages, 3 figures. The results can be reproduced using the
following Matlab code: https://github.com/emilbjornson/optimal-beamformin
MIMO-UFMC Transceiver Schemes for Millimeter Wave Wireless Communications
The UFMC modulation is among the most considered solutions for the
realization of beyond-OFDM air interfaces for future wireless networks. This
paper focuses on the design and analysis of an UFMC transceiver equipped with
multiple antennas and operating at millimeter wave carrier frequencies. The
paper provides the full mathematical model of a MIMO-UFMC transceiver, taking
into account the presence of hybrid analog/digital beamformers at both ends of
the communication links. Then, several detection structures are proposed, both
for the case of single-packet isolated transmission, and for the case of
multiple-packet continuous transmission. In the latter situation, the paper
also considers the case in which no guard time among adjacent packets is
inserted, trading off an increased level of interference with higher values of
spectral efficiency. At the analysis stage, the several considered detection
structures and transmission schemes are compared in terms of bit-error-rate,
root-mean-square-error, and system throughput. The numerical results show that
the proposed transceiver algorithms are effective and that the linear MMSE data
detector is capable of well managing the increased interference brought by the
removal of guard times among consecutive packets, thus yielding throughput
gains of about 10 - 13 . The effect of phase noise at the receiver is also
numerically assessed, and it is shown that the recursive implementation of the
linear MMSE exhibits some degree of robustness against this disturbance
- …