An online wear state monitoring methodology for off-the-shelf embedded processors

The continued scaling of transistors has led to an exponential increase in on-chip power density, which has resulted in increasing temperature. In turn, the increase in temperature directly leads to the increase in the rate of wear of a processor. Negative-bias temperature instability (NBTI) is one of the most dominant integrated circuit (IC) failure mechanisms [13, 5] that strongly depends on temperature. NBTI manifests in the form of increased circuit delays which can lead to timing failures and processor crashes. The ability to monitor the wear progression of a processor due to NBTI is valuable when designing real-time embedded systems. While NBTI can be detected using wear state sensors, not all chips are equipped with these sensors because detecting wear due to NBTI requires modifications to the chip design and incurs area and power overhead. NBTI sensor data may also not be exposed to users in software. In addition, wear sensors cannot take into account variations in wear due to the differences in the wear sensor devices and the other functional devices and their operating conditions. In this paper, we propose a lightweight, online methodology to monitor the wear process due to NBTI for off-the-shelf embedded processors. Our proposed method requires neither data on the threshold voltage and critical paths nor additional hardware. Our methodology can also be extended to predict the wear progression due to some other dominant IC failure mechanisms. Experiments on embedded processors provide insights on NBTI wear progression over time. This knowledge can be used to design real-time embedded systems that explicitly consider runtime wear progression to increase predictability and maintain lifetime reliability requirements

In-situ and In-field temperature and transistor BTI sensing techniques with microprocessor level implementation

In modern deep-scaled CMOS technologies, various silicon-related pitfalls present challenges to the long-term performance of microprocessors. Such challenges include (1) local hot spots, which breach the thermal limitations of a microprocessor, and (2) transistor aging, especially NBTI, which degrades transistor threshold voltage, ultimately threatening the reliability of the entire memory block. In previous systems, the dummy circuit was placed next to the subject, where the dummy was frequently analyzed, and the readout was used to infer the condition of the target. Due to rapidly changing ambient conditions (e.g., temperature and voltage) and the potential scale of the target dimensions, such metrics may not accurately represent the condition of the target. Moreover, such temperature sensors and canary circuits occupy a significant area. Therefore, it would be highly preferable to monitor the target circuit in-situ, i.e., to sense the precise transistor at operation. It is also important to achieve an accurate sensing metric. When the temperature is analyzed, the readout should account for voltage and process variations. While sensing the aging degradation, the readout should account for voltage and temperature fluctuations. This would allow testing during in-field operation, while the circuits achieve area-efficiency. This research had two stages. One result of the first stage was a silicon test chip that was a compact temperature sensor. It involved a family of PTAT+CTAT sensor front-ends that unitized only 6 to 8 conventional CMOS logic devices, yielding a smaller sized chip. The sensor demonstrates accuracy within the target and achieves a 14.3x smaller foot print than preceding published designs. The second product of the first stage was a PMOS aging sensor used in 6T SRAM circuits. The test chip has a real SRAM array, integrated with the proposed PMOS NBTI sensor. It can sense real PMOS NBTI effects in any bit cell (in-situ) and provide robust readings of temperature and voltage (in-field). Intensive aging tests validated the proposed sensing technique. The second stage was focused on implementing the in-situ and in-field sensing techniques in a real processor. The MIPS microprocessor had a modified instruction cache (I$) and instruction set architecture. With the addition of new instruction aging sensing and minor modification of the circuits, the processor can execute aging sensing opportunistically to evaluate the aging level of its instruction cache. A software framework was developed and verified to estimate the retention voltage of the instruction cache over the lifetime of the chip. An area-efficient SoC was developed that could transform the instruction cache into an ambient temperature sensor. It had a physically unclonable function (PUF), and it was built with an area-saving technique similar to the earlier work. This thesis has four chapters. They are presented in chronological and they are aligned with the research described above

Cross-Layer Optimization for Power-Efficient and Robust Digital Circuits and Systems

With the increasing digital services demand, performance and power-efficiency become vital requirements for digital circuits and systems. However, the enabling CMOS technology scaling has been facing significant challenges of device uncertainties, such as process, voltage, and temperature variations. To ensure system reliability, worst-case corner assumptions are usually made in each design level. However, the over-pessimistic worst-case margin leads to unnecessary power waste and performance loss as high as 2.2x. Since optimizations are traditionally confined to each specific level, those safe margins can hardly be properly exploited. To tackle the challenge, it is therefore advised in this Ph.D. thesis to perform a cross-layer optimization for digital signal processing circuits and systems, to achieve a global balance of power consumption and output quality. To conclude, the traditional over-pessimistic worst-case approach leads to huge power waste. In contrast, the adaptive voltage scaling approach saves power (25% for the CORDIC application) by providing a just-needed supply voltage. The power saving is maximized (46% for CORDIC) when a more aggressive voltage over-scaling scheme is applied. These sparsely occurred circuit errors produced by aggressive voltage over-scaling are mitigated by higher level error resilient designs. For functions like FFT and CORDIC, smart error mitigation schemes were proposed to enhance reliability (soft-errors and timing-errors, respectively). Applications like Massive MIMO systems are robust against lower level errors, thanks to the intrinsically redundant antennas. This property makes it applicable to embrace digital hardware that trades quality for power savings.Comment: 190 page

Robust low-power digital circuit design in nano-CMOS technologies

Device scaling has resulted in large scale integrated, high performance, low-power, and low cost systems. However the move towards sub-100 nm technology nodes has increased variability in device characteristics due to large process variations. Variability has severe implications on digital circuit design by causing timing uncertainties in combinational circuits, degrading yield and reliability of memory elements, and increasing power density due to slow scaling of supply voltage. Conventional design methods add large pessimistic safety margins to mitigate increased variability, however, they incur large power and performance loss as the combination of worst cases occurs very rarely. In-situ monitoring of timing failures provides an opportunity to dynamically tune safety margins in proportion to on-chip variability that can significantly minimize power and performance losses. We demonstrated by simulations two delay sensor designs to detect timing failures in advance that can be coupled with different compensation techniques such as voltage scaling, body biasing, or frequency scaling to avoid actual timing failures. Our simulation results using 45 nm and 32 nm technology BSIM4 models indicate significant reduction in total power consumption under temperature and statistical variations. Future work involves using dual sensing to avoid useless voltage scaling that incurs a speed loss. SRAM cache is the first victim of increased process variations that requires handcrafted design to meet area, power, and performance requirements. We have proposed novel 6 transistors (6T), 7 transistors (7T), and 8 transistors (8T)-SRAM cells that enable variability tolerant and low-power SRAM cache designs. Increased sense-amplifier offset voltage due to device mismatch arising from high variability increases delay and power consumption of SRAM design. We have proposed two novel design techniques to reduce offset voltage dependent delays providing a high speed low-power SRAM design. Increasing leakage currents in nano-CMOS technologies pose a major challenge to a low-power reliable design. We have investigated novel segmented supply voltage architecture to reduce leakage power of the SRAM caches since they occupy bulk of the total chip area and power. Future work involves developing leakage reduction methods for the combination logic designs including SRAM peripherals

Design of variability compensation architectures of digital circuits with adaptive body bias

The most critical concern in circuit is to achieve high level of performance with very tight power constraint. As the high performance circuits moved beyond 45nm technology one of the major issues is the parameter variation i.e. deviation in process, temperature and voltage (PVT) values from nominal specifications. A key process parameter subject to variation is the transistor threshold voltage (Vth) which impacts two important parameters: frequency and leakage power. Although the degradation can be compensated by the worstcase scenario based over-design approach, it induces remarkable power and performance overhead which is undesirable in tightly constrained designs. Dynamic voltage scaling (DVS) is a more power efficient approach, however its coarse granularity implies difficulty in handling fine grained variations. These factors have contributed to the growing interest in power aware robust circuit design. We propose a variability compensation architecture with adaptive body bias, for low power applications using 28nm FDSOI technology. The basic approach is based on a dynamic prediction and prevention of possible circuit timing errors. In our proposal we are using a Canary logic technique that enables the typical-case design. The body bias generation is based on a DLL type method which uses an external reference generator and voltage controlled delay line (VCDL) to generate the forward body bias (FBB) control signals. The adaptive technique is used for dynamic detection and correction of path failures in digital designs due to PVT variations. Instead of tuning the supply voltage, the key idea of the design approach is to tune the body bias voltage bymonitoring the error rate during operation. The FBB increases operating speed with an overhead in leakage power

Investigations on corrosion monitor reliability, calibration, and coverage

Thickness loss due to internal corrosion and erosion is a critical issue in ferromagnetic steel structures that can cause catastrophic failures. Ultrasonic thickness gauges are widely used for the detection of wall thickness. Recently permanently installed ultrasonic sensors have become popular for the inspection of areas suspected to undergo wall thickness loss. However, these are limited by the high cost and requirement of coupling agents. To address these problems, a novel cost-effective, and smart corrosion monitor based on the magnetic eddy current technique is developed in this research. The performance and reliability of the monitor to track internal wall thickness loss is tested successfully through accelerated and real-life aging corrosion tests. Due to the handling and safety issues associated with the powerful magnets in magnetic techniques, a particle swarm-based optimisation method is proposed and validated through two test cases. The results indicate that the area of the magnetic excitation circuit could be reduced by 38% without compromising the sensitivity. The reliability of the corrosion monitor is improved by utilising the active redundancy approach to identify and isolate faults in sensors. A real-life aging test is conducted for eight months in an ambient environment through an accelerated corrosion setup. The results obtained from the two corrosion monitors confirm that the proposed corrosion monitor is reliable for tracking the thickness loss. The corrosion monitor is found to be stable against environmental variations. A new in-situ calibration method based on zero-crossing frequency feature is introduced to evaluate the in-situ relative permeability. The thickness of the test specimen could be estimated with an accuracy of ± 0.6 mm. The series of studies conducted in the project reveal that the magnetic corrosion monitor has the capability to detect and quantify uniform wall thickness loss reliably

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems