Adaptive beamforming using frequency invariant uniform concentric circular arrays

This paper proposes new adaptive beamforming algorithms for a class of uniform concentric circular arrays (UCCAs) having near-frequency invariant characteristics. The basic principle of the UCCA frequency invariant beamformer (FIB) is to transform the received signals to the phase mode representation and remove the frequency dependence of individual phase modes through the use of a digital beamforming or compensation network. As a result, the far field pattern of the array is electronic steerable and is approximately invariant over a wider range of frequencies than the uniform circular arrays (UCAs). The beampattern is governed by a small set of variable beamformer weights. Based on the minimum variance distortionless response (MVDR) and generalized sidelobe canceller (GSC) methods, new recursive adaptive beamforming algorithms for UCCA-FIB are proposed. In addition, robust versions of these adaptive beamforming algorithms for mitigating direction-of-arrival (DOA) and sensor position errors are developed. Simulation results show that the proposed adaptive UCCA-FIBs converge much faster and reach a considerable lower steady-state error than conventional broadband UCCA beamformers without using the compensation network. Since fewer variable multipliers are required in the proposed algorithms, it also leads to lower arithmetic complexity and faster tracking performance than conventional methods. © 2007 IEEE.published_or_final_versio

Modified null broadening adaptive beamforming: constrained optimisation approach

A constrained optimisation approach for null broadening adaptive beamforming is proposed. This approach improves the robustness of the traditional MVDR beamformer by broadening nulls for interference direction and the mainlobe for the desired direction. This optimisation is efficiently solved by semidefinite programming. The proposed approach, when applied to high altitude platform communications using a vertical linear antenna array, provides significantly better coverage performance than a previously reported null broadening technique

Design of a Novel Antenna Array Beamformer Using Neural Networks Trained by Modified Adaptive Dispersion Invasive Weed Optimization Based Data

A new antenna array beamformer based on neural networks (NNs) is presented. The NN training is performed by using optimized data sets extracted by a novel Invasive Weed Optimization (IWO) variant called Modified Adaptive Dispersion IWO (MADIWO). The trained NN is utilized as an adaptive beamformer that makes a uniform linear antenna array steer the main lobe towards a desired signal, place respective nulls towards several interference signals and suppress the side lobe level (SLL). Initially, the NN structure is selected by training several NNs of various structures using MADIWO based data and by making a comparison among the NNs in terms of training performance. The selected NN structure is then used to construct an adaptive beamformer, which is compared to MADIWO based and ADIWO based beamformers, regarding the SLL as well as the ability to properly steer the main lobe and the nulls. The comparison is made considering several sets of random cases with different numbers of interference signals and different power levels of additive zero-mean Gaussian noise. The comparative results exhibit the advantages of the proposed beamformer

Sidelobe Suppression for Robust Beamformer via The Mixed Norm Constraint

Applying a sparse constraint on the beam pattern has been suggested to suppress the sidelobe of the minimum variance distortionless response (MVDR) beamformer recently. To further improve the performance, we add a mixed norm constraint on the beam pattern. It matches the beam pattern better and encourages dense distribution in mainlobe and sparse distribution in sidelobe. The obtained beamformer has a lower sidelobe level and deeper nulls for interference avoidance than the standard sparse constraint based beamformer. Simulation demonstrates that the SINR gain is considerable for its lower sidelobe level and deeper nulling for interference, while the robustness against the mismatch between the steering angle and the direction of arrival (DOA) of the desired signal, caused by imperfect estimation of DOA, is maintained too.Comment: 10 pages, 3 figures; accepted by Wireless Personal Communication

Unit circle MVDR beamformer

The array polynomial is the z-transform of the array weights for a narrowband planewave beamformer using a uniform linear array (ULA). Evaluating the array polynomial on the unit circle in the complex plane yields the beampattern. The locations of the polynomial zeros on the unit circle indicate the nulls of the beampattern. For planewave signals measured with a ULA, the locations of the ensemble MVDR polynomial zeros are constrained on the unit circle. However, sample matrix inversion (SMI) MVDR polynomial zeros generally do not fall on the unit circle. The proposed unit circle MVDR (UC MVDR) projects the zeros of the SMI MVDR polynomial radially on the unit circle. This satisfies the constraint on the zeros of ensemble MVDR polynomial. Numerical simulations show that the UC MVDR beamformer suppresses interferers better than the SMI MVDR and the diagonal loaded MVDR beamformer and also improves the white noise gain (WNG).Comment: Accepted to ICASSP 201

Robust beamforming for interference rejection in mobile communications

The problem of robust beamformer design in the presence of moving sources is considered. A new technique based on a generalization of the constrained minimum variance beamformer is proposed. The method explicitly takes into account changes in the scenario due to the movement of the desired and interfering sources, requiring only estimation of the desired DOA. Computer simulations show that the resulting performance constitutes a compromise between interference and noise rejection, computational complexity, and sensitivity to source movement.Peer ReviewedPostprint (published version