12,805 research outputs found
Real-time 3D reconstruction of non-rigid shapes with a single moving camera
© . This manuscript version is made available under the CC-BY-NC-ND 4.0 license http://creativecommons.org/licenses/by-nc-nd/4.0/This paper describes a real-time sequential method to simultaneously recover the camera motion and the 3D shape of deformable objects from a calibrated monocular video. For this purpose, we consider the Navier-Cauchy equations used in 3D linear elasticity and solved by finite elements, to model the time-varying shape per frame. These equations are embedded in an extended Kalman filter, resulting in sequential Bayesian estimation approach. We represent the shape, with unknown material properties, as a combination of elastic elements whose nodal points correspond to salient points in the image. The global rigidity of the shape is encoded by a stiffness matrix, computed after assembling each of these elements. With this piecewise model, we can linearly relate the 3D displacements with the 3D acting forces that cause the object deformation, assumed to be normally distributed. While standard finite-element-method techniques require imposing boundary conditions to solve the resulting linear system, in this work we eliminate this requirement by modeling the compliance matrix with a generalized pseudoinverse that enforces a pre-fixed rank. Our framework also ensures surface continuity without the need for a post-processing step to stitch all the piecewise reconstructions into a global smooth shape. We present experimental results using both synthetic and real videos for different scenarios ranging from isometric to elastic deformations. We also show the consistency of the estimation with respect to 3D ground truth data, include several experiments assessing robustness against artifacts and finally, provide an experimental validation of our performance in real time at frame rate for small mapsPeer ReviewedPostprint (author's final draft
Shape basis interpretation for monocular deformable 3D reconstruction
© 2019 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works.In this paper, we propose a novel interpretable shape model to encode object non-rigidity. We first use the initial frames of a monocular video to recover a rest shape, used later to compute a dissimilarity measure based on a distance matrix measurement. Spectral analysis is then applied to this matrix to obtain a reduced shape basis, that in contrast to existing approaches, can be physically interpreted. In turn, these pre-computed shape bases are used to linearly span the deformation of a wide variety of objects. We introduce the low-rank basis into a sequential approach to recover both camera motion and non-rigid shape from the monocular video, by simply optimizing the weights of the linear combination using bundle adjustment. Since the number of parameters to optimize per frame is relatively small, specially when physical priors are considered, our approach is fast and can potentially run in real time. Validation is done in a wide variety of real-world objects, undergoing both inextensible and extensible deformations. Our approach achieves remarkable robustness to artifacts such as noisy and missing measurements and shows an improved performance to competing methods.Peer ReviewedPostprint (author's final draft
Realtime State Estimation with Tactile and Visual sensing. Application to Planar Manipulation
Accurate and robust object state estimation enables successful object
manipulation. Visual sensing is widely used to estimate object poses. However,
in a cluttered scene or in a tight workspace, the robot's end-effector often
occludes the object from the visual sensor. The robot then loses visual
feedback and must fall back on open-loop execution.
In this paper, we integrate both tactile and visual input using a framework
for solving the SLAM problem, incremental smoothing and mapping (iSAM), to
provide a fast and flexible solution. Visual sensing provides global pose
information but is noisy in general, whereas contact sensing is local, but its
measurements are more accurate relative to the end-effector. By combining them,
we aim to exploit their advantages and overcome their limitations. We explore
the technique in the context of a pusher-slider system. We adapt iSAM's
measurement cost and motion cost to the pushing scenario, and use an
instrumented setup to evaluate the estimation quality with different object
shapes, on different surface materials, and under different contact modes
Reactive Planar Manipulation with Convex Hybrid MPC
This paper presents a reactive controller for planar manipulation tasks that
leverages machine learning to achieve real-time performance. The approach is
based on a Model Predictive Control (MPC) formulation, where the goal is to
find an optimal sequence of robot motions to achieve a desired object motion.
Due to the multiple contact modes associated with frictional interactions, the
resulting optimization program suffers from combinatorial complexity when
tasked with determining the optimal sequence of modes.
To overcome this difficulty, we formulate the search for the optimal mode
sequences offline, separately from the search for optimal control inputs
online. Using tools from machine learning, this leads to a convex hybrid MPC
program that can be solved in real-time. We validate our algorithm on a planar
manipulation experimental setup where results show that the convex hybrid MPC
formulation with learned modes achieves good closed-loop performance on a
trajectory tracking problem
Optical Flow in Mostly Rigid Scenes
The optical flow of natural scenes is a combination of the motion of the
observer and the independent motion of objects. Existing algorithms typically
focus on either recovering motion and structure under the assumption of a
purely static world or optical flow for general unconstrained scenes. We
combine these approaches in an optical flow algorithm that estimates an
explicit segmentation of moving objects from appearance and physical
constraints. In static regions we take advantage of strong constraints to
jointly estimate the camera motion and the 3D structure of the scene over
multiple frames. This allows us to also regularize the structure instead of the
motion. Our formulation uses a Plane+Parallax framework, which works even under
small baselines, and reduces the motion estimation to a one-dimensional search
problem, resulting in more accurate estimation. In moving regions the flow is
treated as unconstrained, and computed with an existing optical flow method.
The resulting Mostly-Rigid Flow (MR-Flow) method achieves state-of-the-art
results on both the MPI-Sintel and KITTI-2015 benchmarks.Comment: 15 pages, 10 figures; accepted for publication at CVPR 201
- …