16,828 research outputs found
Vision-Based Lane-Changing Behavior Detection Using Deep Residual Neural Network
Accurate lane localization and lane change detection are crucial in advanced
driver assistance systems and autonomous driving systems for safer and more
efficient trajectory planning. Conventional localization devices such as Global
Positioning System only provide road-level resolution for car navigation, which
is incompetent to assist in lane-level decision making. The state of art
technique for lane localization is to use Light Detection and Ranging sensors
to correct the global localization error and achieve centimeter-level accuracy,
but the real-time implementation and popularization for LiDAR is still limited
by its computational burden and current cost. As a cost-effective alternative,
vision-based lane change detection has been highly regarded for affordable
autonomous vehicles to support lane-level localization. A deep learning-based
computer vision system is developed to detect the lane change behavior using
the images captured by a front-view camera mounted on the vehicle and data from
the inertial measurement unit for highway driving. Testing results on
real-world driving data have shown that the proposed method is robust with
real-time working ability and could achieve around 87% lane change detection
accuracy. Compared to the average human reaction to visual stimuli, the
proposed computer vision system works 9 times faster, which makes it capable of
helping make life-saving decisions in time
The State-of-the-art of Coordinated Ramp Control with Mixed Traffic Conditions
Ramp metering, a traditional traffic control strategy for conventional
vehicles, has been widely deployed around the world since the 1960s. On the
other hand, the last decade has witnessed significant advances in connected and
automated vehicle (CAV) technology and its great potential for improving
safety, mobility and environmental sustainability. Therefore, a large amount of
research has been conducted on cooperative ramp merging for CAVs only. However,
it is expected that the phase of mixed traffic, namely the coexistence of both
human-driven vehicles and CAVs, would last for a long time. Since there is
little research on the system-wide ramp control with mixed traffic conditions,
the paper aims to close this gap by proposing an innovative system architecture
and reviewing the state-of-the-art studies on the key components of the
proposed system. These components include traffic state estimation, ramp
metering, driving behavior modeling, and coordination of CAVs. All reviewed
literature plot an extensive landscape for the proposed system-wide coordinated
ramp control with mixed traffic conditions.Comment: 8 pages, 1 figure, IEEE INTELLIGENT TRANSPORTATION SYSTEMS CONFERENCE
- ITSC 201
Effects of low speed limits on freeway traffic flow
Recent years have seen a renewed interest in Variable Speed Limit (VSL) strategies. New opportunities for VSL as a freeway metering mechanism or a homogenization scheme to reduce speed differences and lane changing maneuvers are being explored. This paper examines both the macroscopic and microscopic effects of different speed limits on a traffic stream, especially when adopting low speed limits. To that end, data from a VSL experiment carried out on a freeway in Spain are used. Data include vehicle counts, speeds and occupancy per lane, as well as lane changing rates for three days, each with a different fixed speed limit (80 km/h, 60 km/h, and 40km/h). Results reveal some of the mechanisms through which VSL affects traffic performance, specifically the flow and speed distribution across lanes, as well as the ensuing lane changing maneuvers. It is confirmed that the lower the speed limit, the higher the occupancy to achieve a given flow. This result has been observed even for relatively high flows and low speed limits. For instance, a stable flow of 1942 veh/h/lane has been measured with the 40 km/h speed limit in force. The corresponding occupancy was 33%, doubling the typical occupancy for this flow in the absence of speed limits. This means that VSL strategies aiming to restrict the mainline flow on a freeway by using low speed limits will need to be applied carefully, avoiding conditions as the ones presented here, where speed limits have a reduced ability to limit flows. On the other hand, VSL strategies trying to get the most from the increased vehicle storage capacity of freeways under low speed limits might be rather promising. Additionally, results show that lower speed limits increase the speed differences across lanes for moderate demands. This, in turn, also increases the lane changing rate. This means that VSL strategies aiming to homogenize traffic and reduce lane changing activity might not be successful when adopting such low speed limits. In contrast, lower speed limits widen the range of flows under uniform lane flow distributions, so that, even for moderate to low demands, the under-utilization of any lane is avoided. These findings are useful for the development of better traffic models that are able to emulate these effects. Moreover, they are crucial for the implementation and assessment of VSL strategies and other traffic control algorithms.Peer ReviewedPostprint (published version
Derivation of Continuum Traffic Model for Weaving Sections on Freeways.
This paper presents a new continuum model describing the dynamics of multiclass traffic flow on multilane
freeways including weaving sections. In this paper, we consider a specific freeway weaving type, which is
formed when an on ramp is near to an off ramp and these two ramps are joined by an auxiliary lane. Traffic
interactions in this weaving zone are very complex due to the involvement of weaving flows and non-weaving
flows in the so-called mandatory lane-changing process. To handle this complexity, it is essential to have a
good understanding of the (microscopic) driving behavior within the weaving zones. These behaviors are
modeled based on a gap-acceptance model. The methodology to obtain a weaving continuum traffic model is
thus twofold. On the one hand, we develop a (macroscopic) model to determine the mandatory lane-changing
probability based on a renewal process. On the other hand, we implement the lane-changing model into a
current gas-kinetic traffic flow model for heterogeneous traffic flow on multilane roadways. From this,
corresponding macroscopic model is obtained based on the method of moments
Recommended from our members
Development of Eco-Friendly Ramp Control for Connected and Automated Electric Vehicles
With on-board sensors such as camera, radar, and Lidar, connected and automated vehicles (CAVs) can sense the surrounding environment and be driven autonomously and safely by themselves without colliding into other objects on the road. CAVs are also able to communicate with each other and roadside infrastructure via vehicle-to-vehicle and vehicle-to-infrastructure communications, respectively, sharing information on the vehicles’ states, signal phase and timing (SPaT) information, enabling CAVs to make decisions in a collaborative manner. As a typical scenario, ramp control attracts wide attention due to the concerns of safety and mobility in the merging area. In particular, if the line-of-the-sight is blocked (because of grade separation), then neither mainline vehicles nor on-ramp vehicles may well adapt their own dynamics to perform smoothed merging maneuvers. This may lead to speed fluctuations or even shockwave propagating upstream traffic along the corridor, thus potentially increasing the traffic delays and excessive energy consumption. In this project, the research team proposed a hierarchical ramp merging system that not only allowed microscopic cooperative maneuvers for connected and automated electric vehicles on the ramp to merge into mainline traffic flow, but also had controllability of ramp inflow rate, which enabled macroscopic traffic flow control. A centralized optimal control-based approach was proposed to both smooth the merging flow and improve the system-wide mobility of the network. Linear quadratic trackers in both finite horizon and receding horizon forms were developed to solve the optimization problem in terms of path planning and sequence determination, and a microscopic electric vehicle (EV) energy consumption model was applied to estimate the energy consumption. The simulation results confirmed that under the regulated inflow rate, the proposed system was able to avoid potential traffic congestion and improve the mobility (in terms of average speed) as much as 115%, compared to the conventional ramp metering and the ramp without any control approach. Interestingly, for EVs (connected and automated EVs in this study), the improved mobility may not necessarily result in the reduction of energy consumption. The “sweet spot” of average speed ranges from 27–34 mph for the EV models in this study.View the NCST Project Webpag
- …