Mechanisms of High Temperature Degradation of Thermal Barrier Coatings.

Thermal barrier coatings (TBCs) are crucial for increasing the turbine inlet temperature (and hence efficiency) of gas turbine engines. The thesis describes PhD research aimed at improving understanding of the thermal cycling failure mechanisms of electron beam physical vapour deposited (EB-PVD) yttria stabilised zirconia (YSZ) TBCs on single crystal superalloys. The research consisted of three different stages. The first stage involved designing a coupled one-dimensional thermodynamic-kinetic oxidation and diffusion model capable of predicting the concentration profiles of alloying elements in a single-phase γ nickel-rich Ni-Al-Cr ternary alloy by the finite difference method. The aim of this investigation was to improve the understanding of interactions between alloying species and developing oxide. The model demonstrated that in the early stages of oxidation, Al consumption by oxide scale growth is faster than Al replenishment by diffusion towards the scale, resulting in an initial Al depletion in the alloy near the scale. The second stage involved a systematic study of the life-time of TBC systems on different single crystal superalloys. The study aimed at demonstrating that the compatibility of modern nickel-based single crystal superalloys with TBC systems is influenced strongly by the content of alloying element additions in the superalloy substrate. The results can be explained by postulating that the fracture toughness parameters controlling decohesion are influenced strongly by small changes in composition arising from interdiffusion with the bond coat, which itself inherits elemental changes from the substrate. The final stage of study involved a detailed study of different bond coats (two β-structured Pt-Al types and a γ/γ’ Pt-diffusion type) in TBC systems based on an EB-PVD YSZ top coat and a substrate material of CMSX-4 superalloy. Generation of stress in the thermally grown oxide (TGO) on thermal cycling, and its relief by plastic deformation and fracture, were investigated experimentally in detail

Quantification of growth kinetics and adherence of oxide scales formed on Ni-based superalloys at high temperature

Cyclic and isothermal oxidation behaviors of first and fourth-generation superalloys AM1 and MCNG were investigated to evaluate the ability of the scratch test to quantify the adhesion of multi-layered oxide scales. Effects of sulfur content and of scale thickness were studied independently. Available models lead to large discrepancies in the calculated work of adhesion values with the evaluation of the residual stress being the largest source of error. Nevertheless, models can assess the effect of sulfur content and the scratch test can be used to correlate the long-term cyclic oxidation behavior and the adhesion of oxide scales

High-temperature oxidation of nickel-based alloys and estimation of the adhesion strength of resulting oxide layers

The kinetics of isothermal oxidation (1100°C) of commercial nickel-based alloys with different content of sulfur (0.22–3.2 wt ppm) is studied. The adhesion strength in a metal/oxide system is estimated as a function of sulfur content and duration of high-temperature exposure. The scratch-test technique is proposed to quantitatively estimate the work of adhesion of resulting oxide films. It is found that the film microstructure is composed of an inner α-Al2O3 layer and an outer NiAl2O4 spinel layer, which are separated by discrete inclusions of TiO2. Residual stresses in the oxide film are experimentally determined by X-ray diffraction. spinel layer, which are separated by discrete inclusions of TiO2. Residual stresses in the oxide film are experimentally determined by X-ray diffractio

Surface effects of corrosive media on hardness, friction, and wear of materials

Hardness, friction, and wear experiments were conducted with magnesium oxide exposed to various corrosive media and also with elemental iron and nickel exposed to water and NaOH. Chlorides such as MgCl2 and sodium containing films were formed on cleaved magnesium oxide surfaces. The MgCl2 films softened the magnesium oxide surfaces and caused high friction and great deformation. Hardness was strongly influenced by the pH value of the HCl-containing solution. The lower the pH, the lower the microhardness. Neither the pH value of nor the immersion time in NaOH containing, NaCl containing, and HNO3 containing solutions influenced the microhardness of magnesium oxide. NaOH formed a protective and low friction film on iron surfaces. The coefficient of friction and the wear for iron were low at concentrations of NaOH higher than 0.01 N. An increase in NaOH concentration resulted in a decrease in the concentration of ferric oxide on the iron surface. It took less NaOH to form a protective, low friction film on nickel than on iron

A study of the adhesion and cohesion of metals Second interim summary report, 9 Mar. 1966 - 9 Mar. 1967

Adhesion and cohesion efficiency of polycrystalline coppe

Fluidic packaging of microengine and microrocket devices for high pressure and high temperature operation

The fluidic packaging of Power MEMS devices such as the MIT microengine and microrocket requires the fabrication of hermetic seals capable of withstanding temperature in the range 20-600/spl deg/C and pressures in the range 100-300 atm. We describe an approach to such packaging by attaching Kovar metal tubes to a silicon device using glass seal technology. Failure due to fracture of the seals is a significant reliability concern in the baseline process: microscopy revealed a large number of voids in the glass, pre-cracks in the glass and silicon, and poor wetting of the glass to silicon. The effects of various processing and materials parameters on these phenomena were examined. A robust procedure, based on the use of metal-coated silicon substrates, was developed to ensure good wetting. The bending strength of single-tube specimens was determined at several temperatures. The dominant failure mode changed from fracture at room temperature to yielding of the glass and Kovar at 600/spl deg/C. The strength in tension at room temperature was analyzed using Weibull statistics; these results indicate a probability of survival of 0.99 at an operational pressure of 125 atm at room temperature for single tubes and a corresponding probability of 0.9 for a packaged device with 11 joints. The residual stresses were analyzed using the method of finite elements and recommendations for the improvement of packaging reliability are suggested

Review on Slip Transmission Criteria in Experiments and Crystal Plasticity Models

A comprehensive overview is given of the literature on slip transmission criteria for grain boundaries in metals, with a focus on slip system and grain boundary orientation. Much of this extensive literature has been informed by experimental investigations. The use of geometric criteria in continuum crystal plasticity models is discussed. The theoretical framework of Gurtin (2008, J. Mech. Phys. Solids 56, p. 640) is reviewed for the single slip case. This highlights the connections to slip transmission criteria from the literature that are not discussed in the work itself. Different geometric criteria are compared for the single slip case with regard to their prediction of slip transmission. Perspectives on additional criteria, investigated in experiments and used in computational simulations, are given.Comment: in Journal of Materials Science, 201