Selective maintenance optimisation for series-parallel systems alternating missions and scheduled breaks with stochastic durations

This paper deals with the selective maintenance problem for a multi-component system performing consecutive missions separated by scheduled breaks. To increase the probability of successfully completing its next mission, the system components are maintained during the break. A list of potential imperfect maintenance actions on each component, ranging from minimal repair to replacement is available. The general hybrid hazard rate approach is used to model the reliability improvement of the system components. Durations of the maintenance actions, the mission and the breaks are stochastic with known probability distributions. The resulting optimisation problem is modelled as a non-linear stochastic programme. Its objective is to determine a cost-optimal subset of maintenance actions to be performed on the components given the limited stochastic duration of the break and the minimum system reliability level required to complete the next mission. The fundamental concepts and relevant parameters of this decision-making problem are developed and discussed. Numerical experiments are provided to demonstrate the added value of solving this selective maintenance problem as a stochastic optimisation programme

Optimal maintenance of multi-component systems: a review

In this article we give an overview of the literature on multi-component maintenance optimization. We focus on work appearing since the 1991 survey "A survey of maintenance models for multi-unit systems" by Cho and Parlar. This paper builds forth on the review article by Dekker et al. (1996), which focusses on economic dependence, and the survey of maintenance policies by Wang (2002), in which some group maintenance and some opportunistic maintenance policies are considered. Our classification scheme is primarily based on the dependence between components (stochastic, structural or economic). Next, we also classify the papers on the basis of the planning aspect (short-term vs long-term), the grouping of maintenance activities (either grouping preventive or corrective maintenance, or opportunistic grouping) and the optimization approach used (heuristic, policy classes or exact algorithms). Finally, we pay attention to the applications of the models.literature review;economic dependence;failure interaction;maintenance policies;grouping maintenance;multi-component systems;opportunistic maintenance;maintencance optimization;structural dependence

Inventory management in railway sleepers: A simulation model for replacement strategies

This paper describes the development of a simulation model to assess the inventory requirements of alternative rail sleeper replacement strategies. The main aim of the model is to determine the optimal replacement strategy, given replacement costs and resultant train operating cost benefits. We consider the replacement problem under the following assumptions: The time to failure under constant stress follows a Weibull distribution and the scale parameter is a function of stress level and the three stress levels under normal (all adjacent units are good), medium-stress (one adjacent unit has failed) and high-stress conditions (two adjacent units are failed) are considered. The cumulative exposure model is used to model the failure distributions. The operational cost per unit time depends on the maximum number of consecutive failed units. The replacement cost consists of the fixed cost and variable cost proportional to the number of units replaced. A finite horizon is considered and total expected cost is a criterion for comparing the proposed policies. The model has been tested using rail system data and the results are presented in this paper

Estimation of component redundancy in optimal age maintenance

The classical Optimal Age-Replacement defines the maintenance strategy based on the equipment failure consequences. For severe consequences an early equipment replacement is recommended. For minor consequences the repair after failure is proposed. One way of reducing the failure consequences is the use of redundancies, especially if the equipment failure rate is decreasing over time, since in this case the preventive replacement does not reduce the risk of failure. The estimation of an active component redundancy degree is very important in order to minimize the life-cycle cost. If it is possible to make these estimations in the early phase of system design, the implementation is easier and the amortization faster. This work proposes an adaptation of the Optimal Age-Replacement method in order to simultaneously optimize the equipment redundancy allocation and the maintenance plan. The main goal is to provide a simple methodology, requiring the fewer data possible. A set of examples are presented illustrating that this methodology covers a wide variety of operating conditions. The optimization of the number of repairs between each replacement, in the cases of imperfect repairs, is another feature of this methodology

On the Statistical Modeling and Analysis of Repairable Systems

We review basic modeling approaches for failure and maintenance data from repairable systems. In particular we consider imperfect repair models, defined in terms of virtual age processes, and the trend-renewal process which extends the nonhomogeneous Poisson process and the renewal process. In the case where several systems of the same kind are observed, we show how observed covariates and unobserved heterogeneity can be included in the models. We also consider various approaches to trend testing. Modern reliability data bases usually contain information on the type of failure, the type of maintenance and so forth in addition to the failure times themselves. Basing our work on recent literature we present a framework where the observed events are modeled as marked point processes, with marks labeling the types of events. Throughout the paper the emphasis is more on modeling than on statistical inference.Comment: Published at http://dx.doi.org/10.1214/088342306000000448 in the Statistical Science (http://www.imstat.org/sts/) by the Institute of Mathematical Statistics (http://www.imstat.org

A unified methodology of maintenance management for repairable systems based on optimal stopping theory

This dissertation focuses on the study of maintenance management for repairable systems based on optimal stopping theory. From reliability engineering’s point of view, all systems are subject to deterioration with age and usage. System deterioration can take various forms, including wear, fatigue, fracture, cracking, breaking, corrosion, erosion and instability, any of which may ultimately cause the system to fail to perform its required function. Consequently, controlling system deterioration through maintenance and thus controlling the risk of system failure becomes beneficial or even necessary. Decision makers constantly face two fundamental problems with respect to system maintenance. One is whether or when preventive maintenance should be performed in order to avoid costly failures. The other problem is how to make the choice among different maintenance actions in response to a system failure. The whole purpose of maintenance management is to keep the system in good working condition at a reasonably low cost, thus the tradeoff between cost and condition plays a central role in the study of maintenance management, which demands rigorous optimization. The agenda of this research is to develop a unified methodology for modeling and optimization of maintenance systems. A general modeling framework with six classifying criteria is to be developed to formulate and analyze a wide range of maintenance systems which include many existing models in the literature. A unified optimization procedure is developed based on optimal stopping, semi-martingale, and lambda-maximization techniques to solve these models contained in the framework. A comprehensive model is proposed and solved in this general framework using the developed procedure which incorporates many other models as special cases. Policy comparison and policy optimality are studied to offer further insights. Along the theoretical development, numerical examples are provided to illustrate the applicability of the methodology. The main contribution of this research is that the unified modeling framework and systematic optimization procedure structurize the pool of models and policies, weed out non-optimal policies, and establish a theoretical foundation for further development