A polymorphic hardware platform

In the domain of spatial computing, it appears that platforms based on either reconfigurable datapath units or on hybrid microprocessor/logic cell organizations are in the ascendancy as they appear to offer the most efficient means of providing resources across the greatest range of hardware designs. This paper encompasses an initial exploration of an alternative organization. It looks at the effect of using a very fine-grained approach based on a largely undifferentiated logic cell that can be configured to operate as a state element, logic or interconnect - or combinations of all three. A vertical layout style hides the overheads imposed by reconfigurability to an extent where very fine-grained organizations become a viable option. It is demonstrated that the technique can be used to develop building blocks for both synchronous and asynchronous circuits, supporting the development of hybrid architectures such as globally asynchronous, locally synchronous

A low-power reconfigurable logic array based on double-gate transistors

A fine-grained reconfigurable architecture based on double gate technology is proposed and analyzed. The logic function operating on the first gate of a double-gate (DG) transistor is reconfigured by altering the charge on its second gate. Each cell in the array can act as logic or interconnect, or both, contrasting with current field-programmable gate array structures in which logic and interconnect are built and configured separately. Simulation results are presented for a fully depleted SOI DG-MOSFET implementation and contrasted with two other proposals from the literature based on directed self-assembly

Dynamic Partial Reconfiguration for Dependable Systems

Moore’s law has served as goal and motivation for consumer electronics manufacturers in the last decades. The results in terms of processing power increase in the consumer electronics devices have been mainly achieved due to cost reduction and technology shrinking. However, reducing physical geometries mainly affects the electronic devices’ dependability, making them more sensitive to soft-errors like Single Event Transient (SET) of Single Event Upset (SEU) and hard (permanent) faults, e.g. due to aging effects. Accordingly, safety critical systems often rely on the adoption of old technology nodes, even if they introduce longer design time w.r.t. consumer electronics. In fact, functional safety requirements are increasingly pushing industry in developing innovative methodologies to design high-dependable systems with the required diagnostic coverage. On the other hand commercial off-the-shelf (COTS) devices adoption began to be considered for safety-related systems due to real-time requirements, the need for the implementation of computationally hungry algorithms and lower design costs. In this field FPGA market share is constantly increased, thanks to their flexibility and low non-recurrent engineering costs, making them suitable for a set of safety critical applications with low production volumes. The works presented in this thesis tries to face new dependability issues in modern reconfigurable systems, exploiting their special features to take proper counteractions with low impacton performances, namely Dynamic Partial Reconfiguration

FPGA dynamic and partial reconfiguration : a survey of architectures, methods, and applications

Dynamic and partial reconfiguration are key differentiating capabilities of field programmable gate arrays (FPGAs). While they have been studied extensively in academic literature, they find limited use in deployed systems. We review FPGA reconfiguration, looking at architectures built for the purpose, and the properties of modern commercial architectures. We then investigate design flows, and identify the key challenges in making reconfigurable FPGA systems easier to design. Finally, we look at applications where reconfiguration has found use, as well as proposing new areas where this capability places FPGAs in a unique position for adoption

Online self-test wrapper for runtime-reconfigurable systems

Reconfigurable Systems-on-a-Chip (SoC) architectures consist of microprocessors and Field Programmable Gate Arrays (FPGAs). In order to implement runtime reconfigurable systems, these SoC devices combine the ease of programmability and the flexibility that FPGAs provide. One representative of these is the new Xilinx Zynq-7000 Extensible Processing Platform (EPP), which integrates a dual-core ARM Cortex-A9 based Processing System (PS) and Programmable Logic (PL) in a single device. After power on, the PS is booted and the PL can subsequently be configured and reconfigured by the PS. Recent FPGA technologies incorporate the dynamic Partial Reconfiguration (PR) feature. PR allows new functionality to be programmed online into specific regions of the FPGA while the performance and functionality of the remaining logic is preserved. This on-the-fly reconfiguration characteristic enables designers to time-multiplex portions of hardware dynamically, load functions into the FPGA on an as-needed basis. The configuration access port on the FPGA can be used to load the configuration data from memory to the reconfigurable block, which enables the user to reconfigure the FPGA online and test runtime systems. Manufactured in the advanced 28 nm technologies, the modern generations of FPGAs are increasingly prone to latent defects and aging-related failure mechanisms. To detect faults contained in the reconfigurable gate arrays, dedicated on and off-line test methods can be employed to test the device in the field. Adaptive systems require that the fault is detected and localized, so that the faulty logic unit will not be used in future reconfiguration steps. This thesis presents the development and evaluation of a self-test wrapper for the reconfigurable parts in such hybrid SoCs. It comprises the implementation of Test Configurations (TCs) of reconfigurable components as well as the generation and application of appropriate test stimuli and response analysis. The self-test wrapper is successfully implemented and is fully compatible with the AMBA protocols. The TC implementation is based on an existing Java framework for Xilinx Virtex-5 FPGA, and extended to the Zynq-7000 EPP family. These TCs are successfully redesigned to have a full logic coverage of FPGA structures. Furthermore, the array-based testing method is adopted and the tests can be applied to any part of the reconfigurable fabric. A complete software project has been developed and built to allow the reconfiguration process to be triggered by the ARM microprocessor. Functional test of the reconfigurable architecture, online self-test execution and retrieval of results are under the control of the embedded processor. Implementation results and analysis demonstrate that TCs are successfully synthesized and can be dynamically reconfigured into the area under test, and subsequent tests can be performed accordingly

Via-switch FPGA with transistor-free programmability enabling energy-efficient near-memory parallel computation

We are developing field-programmable gate arrays (FPGAs) with a new non-volatile switch called via-switch. In via-switch FPGAs (VS-FPGAs), the via-switches required for reconfiguration are placed in the routing layer so that the entire transistor layer can be utilized for computing, and higher implementation density can be achieved compared to conventional SRAM FPGAs. Furthermore, since arithmetic units and memories for computing can be placed under the via-switch crossbar for routing, large-scale parallel operations can be realized where the memory and the arithmetic unit are adjacent to each other. These features enable operation with high energy efficiency. This article reports 65 nm prototype fabrication results and predicted the performance of the VS-FPGA designed for AI applications. We also present the developed application mapping flow and crossbar programming method. The VS-FPGA closes the gap between FPGA and application-specific integrated circuits (ASIC) with the performance advantage of the via-switch and via-switch copy scheme for FPGA-to-ASIC migration, contributing to the expansion of the FPGA usage

A Finite Domain Constraint Approach for Placement and Routing of Coarse-Grained Reconfigurable Architectures

Scheduling, placement, and routing are important steps in Very Large Scale Integration (VLSI) design. Researchers have developed numerous techniques to solve placement and routing problems. As the complexity of Application Specific Integrated Circuits (ASICs) increased over the past decades, so did the demand for improved place and route techniques. The primary objective of these place and route approaches has typically been wirelength minimization due to its impact on signal delay and design performance. With the advent of Field Programmable Gate Arrays (FPGAs), the same place and route techniques were applied to FPGA-based design. However, traditional place and route techniques may not work for Coarse-Grained Reconfigurable Architectures (CGRAs), which are reconfigurable devices offering wider path widths than FPGAs and more flexibility than ASICs, due to the differences in architecture and routing network. Further, the routing network of several types of CGRAs, including the Field Programmable Object Array (FPOA), has deterministic timing as compared to the routing fabric of most ASICs and FPGAs reported in the literature. This necessitates a fresh look at alternative approaches to place and route designs. This dissertation presents a finite domain constraint-based, delay-aware placement and routing methodology targeting an FPOA. The proposed methodology takes advantage of the deterministic routing network of CGRAs to perform a delay aware placement

3D-SoftChip: A novel 3D vertically integrated adaptive computing system [thesis]

At present, as we enter the nano and giga-scaled integrated-circuit era, there are many system design challenges which must be overcome to resolve problems in current systems. The incredibly increased nonrecurring engineering (NRE) cost, abruptly shortened Time-to- Market (ITA) period and ever widening design productive gaps are good examples illustrating the problems in current systems. To cope with these problems, the concept of an Adaptive Computing System is becoming a critical technology for next generation computing systems. The other big problem is an explosion in the interconnection wire requirements in standard planar technology resulting from the very high data-bandwidth requirements demanded for real-time communications and multimedia signal processing. The concept of 3D-vertical integration of 2D planar chips becomes an attractive solution to combat the ever increasing interconnect wire requirements. As a result, this research proposes the concept of a novel 3D integrated adaptive computing system, which we term 3D-ACSoC. The architecture and advanced system design methodology of the proposed 3D-SoftChip as a forthcoming giga-scaled integrated circuit computing system has been introduced, along with high-level system modeling and functional verification in the early design stage using SystemC

Improving low latency applications for reconfigurable devices

This thesis seeks to improve low latency application performance via architectural improvements in reconfigurable devices. This is achieved by improving resource utilisation and access, and by exploiting the different environments within which reconfigurable devices are deployed. Our first contribution leverages devices deployed at the network level to enable the low latency processing of financial market data feeds. Financial exchanges transmit messages via two identical data feeds to reduce the chance of message loss. We present an approach to arbitrate these redundant feeds at the network level using a Field-Programmable Gate Array (FPGA). With support for any messaging protocol, we evaluate our design using the NASDAQ TotalView-ITCH, OPRA, and ARCA data feed protocols, and provide two simultaneous outputs: one prioritising low latency, and one prioritising high reliability with three dynamically configurable windowing methods. Our second contribution is a new ring-based architecture for low latency, parallel access to FPGA memory. Traditional FPGA memory is formed by grouping block memories (BRAMs) together and accessing them as a single device. Our architecture accesses these BRAMs independently and in parallel. Targeting memory-based computing, which stores pre-computed function results in memory, we benefit low latency applications that rely on: highly-complex functions; iterative computation; or many parallel accesses to a shared resource. We assess square root, power, trigonometric, and hyperbolic functions within the FPGA, and provide a tool to convert Python functions to our new architecture. Our third contribution extends the ring-based architecture to support any FPGA processing element. We unify E heterogeneous processing elements within compute pools, with each element implementing the same function, and the pool serving D parallel function calls. Our implementation-agnostic approach supports processing elements with different latencies, implementations, and pipeline lengths, as well as non-deterministic latencies. Compute pools evenly balance access to processing elements across the entire application, and are evaluated by implementing eight different neural network activation functions within an FPGA.Open Acces