Fault-tolerant polyphase filters-based decimators for SRAM-based FPGA implementations

To reduce the oversampling rate of baseband signals, decimation is widely used in digital communication systems. Polyphase filters (PPFs) can be used to efficiently implement decimators. SRAM-based FPGAs provide large amounts of resources combined with flexibility and are a popular option for the implementation of communication receivers. However, they are sensitive to soft errors, which limit their application in harsh environments, such as space. An initial reliability study on SRAM-based FPGA implemented decimation shows that the soft errors on around 5% of the critical bits in the configuration memory of the decimator would degrade the decimated signal dramatically. Based on this result, this paper proposes an efficient fault tolerance scheme, in which the high correlation between adjacent PPFs outputs is utilized to tolerate the fault of a single-phase filter, and a duplicate and comparison structure is used to protect the fault tolerance logic. Hardware implementation and fault injection experiments show that the proposed scheme can drastically reduce the number of critical bits that cause severe output degradation with 1.5x resource usage and 0.75x maximum frequency relative to the unprotected decimator. Therefore, the proposed scheme can be an alternative to Triple Modular Redundancy that more than triples the use of resources.This work is supported by Natural Science Funds of China (Grant No. 62171313) and is partially supported by the ACHILLES project PID2019-104207RB-I00 funded by the Spanish Ministry of Science and Innovation and by the Madrid Community research project TAPIR-CM grant no. P2018/TCS-4496

Adaptive Baseband Pro cessing and Configurable Hardware for Wireless Communication

The world of information is literally at one’s fingertips, allowing access to previously unimaginable amounts of data, thanks to advances in wireless communication. The growing demand for high speed data has necessitated theuse of wider bandwidths, and wireless technologies such as Multiple-InputMultiple-Output (MIMO) have been adopted to increase spectral efficiency.These advanced communication technologies require sophisticated signal processing, often leading to higher power consumption and reduced battery life.Therefore, increasing energy efficiency of baseband hardware for MIMO signal processing has become extremely vital. High Quality of Service (QoS)requirements invariably lead to a larger number of computations and a higherpower dissipation. However, recognizing the dynamic nature of the wirelesscommunication medium in which only some channel scenarios require complexsignal processing, and that not all situations call for high data rates, allowsthe use of an adaptive channel aware signal processing strategy to provide adesired QoS. Information such as interference conditions, coherence bandwidthand Signal to Noise Ratio (SNR) can be used to reduce algorithmic computations in favorable channels. Hardware circuits which run these algorithmsneed flexibility and easy reconfigurability to switch between multiple designsfor different parameters. These parameters can be used to tune the operations of different components in a receiver based on feedback from the digitalbaseband. This dissertation focuses on the optimization of digital basebandcircuitry of receivers which use feedback to trade power and performance. Aco-optimization approach, where designs are optimized starting from the algorithmic stage through the hardware architectural stage to the final circuitimplementation is adopted to realize energy efficient digital baseband hardwarefor mobile 4G devices. These concepts are also extended to the next generation5G systems where the energy efficiency of the base station is improved.This work includes six papers that examine digital circuits in MIMO wireless receivers. Several key blocks in these receiver include analog circuits thathave residual non-linearities, leading to signal intermodulation and distortion.Paper-I introduces a digital technique to detect such non-linearities and calibrate analog circuits to improve signal quality. The concept of a digital nonlinearity tuning system developed in Paper-I is implemented and demonstratedin hardware. The performance of this implementation is tested with an analogchannel select filter, and results are presented in Paper-II. MIMO systems suchas the ones used in 4G, may employ QR Decomposition (QRD) processors tosimplify the implementation of tree search based signal detectors. However,the small form factor of the mobile device increases spatial correlation, whichis detrimental to signal multiplexing. Consequently, a QRD processor capableof handling high spatial correlation is presented in Paper-III. The algorithm and hardware implementation are optimized for carrier aggregation, which increases requirements on signal processing throughput, leading to higher powerdissipation. Paper-IV presents a method to perform channel-aware processingwith a simple interpolation strategy to adaptively reduce QRD computationcount. Channel properties such as coherence bandwidth and SNR are used toreduce multiplications by 40% to 80%. These concepts are extended to usetime domain correlation properties, and a full QRD processor for 4G systemsfabricated in 28 nm FD-SOI technology is presented in Paper-V. The designis implemented with a configurable architecture and measurements show thatcircuit tuning results in a highly energy efficient processor, requiring 0.2 nJ to1.3 nJ for each QRD. Finally, these adaptive channel-aware signal processingconcepts are examined in the scope of the next generation of communicationsystems. Massive MIMO systems increase spectral efficiency by using a largenumber of antennas at the base station. Consequently, the signal processingat the base station has a high computational count. Paper-VI presents a configurable detection scheme which reduces this complexity by using techniquessuch as selective user detection and interpolation based signal processing. Hardware is optimized for resource sharing, resulting in a highly reconfigurable andenergy efficient uplink signal detector

HLS-lohkojen evaluointi ASIC-piirien toteutusvuossa

Digital systems continue growing in complexity, but the design and verification productivity has not been able to improve in the same manner, which has led to a productivity gap. Raising the abstraction level of the design with high-level synthesis (HLS) has been proposed to increase productivity. However, at the higher abstraction level, the designer has less control on the generated register-transfer level (RTL) code, which might cause problems later in the design flow. Moreover, certain design steps might be impractical to carry out with HLS. This thesis work investigates if HLS is compliant with an existing ASIC implementation flow. The research is conducted by creating an IP (intellectual property) block with a modern HLS tool and passing the generated RTL code through the various steps in the flow. The quality of results and design effort are also compared to the manually coded RTL implementation of the same IP. The HLS tool and the generated RTL code are found mostly compliant with the existing flow, but a few problems are identified in the ECOs (engineering change orders) and technology-specific component instantiation. The HLS design has almost equal physical area with the hand-written RTL design, and it meets the given timing constraints. Design effort with HLS is estimated 20-50% smaller compared to traditional RTL design, and the C++ code contains 60% fewer lines of code than the manually written VHDL code