1,863 research outputs found
On the geometry of wireless network multicast in 2-D
We provide a geometric solution to the problem of optimal relay positioning
to maximize the multicast rate for low-SNR networks. The networks we consider,
consist of a single source, multiple receivers and the only intermediate and
locatable node as the relay. We construct network the hypergraph of the system
nodes from the underlying information theoretic model of low-SNR regime that
operates using superposition coding and FDMA in conjunction (which we call the
"achievable hypergraph model"). We make the following contributions. 1) We show
that the problem of optimal relay positioning maximizing the multicast rate can
be completely decoupled from the flow optimization by noticing and exploiting
geometric properties of multicast flow. 2) All the flow maximizing the
multicast rate is sent over at most two paths, in succession. The relay
position is dependent only on one path (out of the two), irrespective of the
number of receiver nodes in the system. Subsequently, we propose simple and
efficient geometric algorithms to compute the optimal relay position. 3)
Finally, we show that in our model at the optimal relay position, the
difference between the maximized multicast rate and the cut-set bound is
minimum. We solve the problem for all (Ps,Pr) pairs of source and relay
transmit powers and the path loss exponent \alpha greater than 2
Optimal relay location and power allocation for low SNR broadcast relay channels
We consider the broadcast relay channel (BRC), where a single source
transmits to multiple destinations with the help of a relay, in the limit of a
large bandwidth. We address the problem of optimal relay positioning and power
allocations at source and relay, to maximize the multicast rate from source to
all destinations. To solve such a network planning problem, we develop a
three-faceted approach based on an underlying information theoretic model,
computational geometric aspects, and network optimization tools. Firstly,
assuming superposition coding and frequency division between the source and the
relay, the information theoretic framework yields a hypergraph model of the
wideband BRC, which captures the dependency of achievable rate-tuples on the
network topology. As the relay position varies, so does the set of hyperarcs
constituting the hypergraph, rendering the combinatorial nature of optimization
problem. We show that the convex hull C of all nodes in the 2-D plane can be
divided into disjoint regions corresponding to distinct hyperarcs sets. These
sets are obtained by superimposing all k-th order Voronoi tessellation of C. We
propose an easy and efficient algorithm to compute all hyperarc sets, and prove
they are polynomially bounded. Using the switched hypergraph approach, we model
the original problem as a continuous yet non-convex network optimization
program. Ultimately, availing on the techniques of geometric programming and
-norm surrogate approximation, we derive a good convex approximation. We
provide a detailed characterization of the problem for collinearly located
destinations, and then give a generalization for arbitrarily located
destinations. Finally, we show strong gains for the optimal relay positioning
compared to seemingly interesting positions.Comment: In Proceedings of INFOCOM 201
Quasi-Concavity for Gaussian Multicast Relay Channels
Standard upper and lower bounds on the capacity of relay channels are cut-set
(CS), decode-forward (DF), and quantize-forward (QF) rates. For real additive
white Gaussian noise (AWGN) multicast relay channels with one source node and
one relay node, these bounds are shown to be quasi-concave in the receiver
signal-to-noise ratios and the squared source-relay correlation coefficient.
Furthermore, the CS rates are shown to be quasi-concave in the relay position
for a fixed correlation coefficient, and the DF rates are shown to be
quasi-concave in the relay position. The latter property characterizes the
optimal relay position when using DF.Comment: Shortened version of a document that appeared as an open access paper
at https://www.mdpi.com/1099-4300/21/2/10
WiLiTV: A Low-Cost Wireless Framework for Live TV Services
With the evolution of HDTV and Ultra HDTV, the bandwidth requirement for
IP-based TV content is rapidly increasing. Consumers demand uninterrupted
service with a high Quality of Experience (QoE). Service providers are
constantly trying to differentiate themselves by innovating new ways of
distributing content more efficiently with lower cost and higher penetration.
In this work, we propose a cost-efficient wireless framework (WiLiTV) for
delivering live TV services, consisting of a mix of wireless access
technologies (e.g. Satellite, WiFi and LTE overlay links). In the proposed
architecture, live TV content is injected into the network at a few residential
locations using satellite dishes. The content is then further distributed to
other homes using a house-to-house WiFi network or via an overlay LTE network.
Our problem is to construct an optimal TV distribution network with the minimum
number of satellite injection points, while preserving the highest QoE, for
different neighborhood densities. We evaluate the framework using realistic
time-varying demand patterns and a diverse set of home location data. Our study
demonstrates that the architecture requires 75 - 90% fewer satellite injection
points, compared to traditional architectures. Furthermore, we show that most
cost savings can be obtained using simple and practical relay routing
solutions
Requirement analysis for building practical accident warning systems based on vehicular ad-hoc networks
An Accident Warning System (AWS) is a safety application that provides collision avoidance notifications for next generation vehicles whilst Vehicular Ad-hoc Networks (VANETs) provide the communication functionality to exchange these notifi- cations. Despite much previous research, there is little agreement on the requirements for accident warning systems. In order to build a practical warning system, it is important to ascertain the system requirements, information to be exchanged, and protocols needed for communication between vehicles. This paper presents a practical model of an accident warning system by stipulating the requirements in a realistic manner and thoroughly reviewing previous proposals with a view to identify gaps in this area
Robotic Wireless Sensor Networks
In this chapter, we present a literature survey of an emerging, cutting-edge,
and multi-disciplinary field of research at the intersection of Robotics and
Wireless Sensor Networks (WSN) which we refer to as Robotic Wireless Sensor
Networks (RWSN). We define a RWSN as an autonomous networked multi-robot system
that aims to achieve certain sensing goals while meeting and maintaining
certain communication performance requirements, through cooperative control,
learning and adaptation. While both of the component areas, i.e., Robotics and
WSN, are very well-known and well-explored, there exist a whole set of new
opportunities and research directions at the intersection of these two fields
which are relatively or even completely unexplored. One such example would be
the use of a set of robotic routers to set up a temporary communication path
between a sender and a receiver that uses the controlled mobility to the
advantage of packet routing. We find that there exist only a limited number of
articles to be directly categorized as RWSN related works whereas there exist a
range of articles in the robotics and the WSN literature that are also relevant
to this new field of research. To connect the dots, we first identify the core
problems and research trends related to RWSN such as connectivity,
localization, routing, and robust flow of information. Next, we classify the
existing research on RWSN as well as the relevant state-of-the-arts from
robotics and WSN community according to the problems and trends identified in
the first step. Lastly, we analyze what is missing in the existing literature,
and identify topics that require more research attention in the future
Direct communication radio Iinterface for new radio multicasting and cooperative positioning
Cotutela: Universidad de defensa UNIVERSITA’ MEDITERRANEA DI REGGIO CALABRIARecently, the popularity of Millimeter Wave (mmWave) wireless networks has increased due to their capability to cope with the escalation of mobile data demands caused by the unprecedented proliferation of smart devices in the fifth-generation (5G). Extremely high frequency or mmWave band is a fundamental pillar in the provision of the expected gigabit data rates. Hence, according to both academic and industrial communities, mmWave technology, e.g., 5G New Radio (NR) and WiGig (60 GHz), is considered as one of the main components of 5G and beyond networks. Particularly, the 3rd Generation Partnership Project (3GPP) provides for the use of licensed mmWave sub-bands for the 5G mmWave cellular networks, whereas IEEE actively explores the unlicensed band at 60 GHz for the next-generation wireless local area networks. In this regard, mmWave has been envisaged as a new technology
layout for real-time heavy-traffic and wearable applications.
This very work is devoted to solving the problem of mmWave band communication system while enhancing its advantages through utilizing the direct communication radio interface for NR multicasting, cooperative positioning, and mission-critical applications. The main contributions presented in this work include: (i) a set of mathematical frameworks and simulation tools to characterize multicast traffic delivery in mmWave directional systems; (ii) sidelink
relaying concept exploitation to deal with the channel condition deterioration of dynamic multicast systems and to ensure mission-critical and ultra-reliable low-latency communications; (iii) cooperative positioning techniques analysis for enhancing cellular positioning accuracy for 5G+ emerging applications that require not only improved communication characteristics but also precise localization.
Our study indicates the need for additional mechanisms/research that can be utilized: (i) to further improve multicasting performance in 5G/6G systems; (ii) to investigate sideline aspects, including, but not limited to, standardization perspective and the next relay selection strategies; and (iii) to design cooperative positioning systems based on Device-to-Device (D2D) technology
- …