106 research outputs found
IPv6 Mesh over BLUETOOTH(R) Low Energy using IPSP
RFC 7668 describes the adaptation of 6LoWPAN techniques to enable IPv6 over Bluetooth low energy networks that follow the star topology. However, recent Bluetooth specifications allow the formation of extended topologies as well. This document specifies mechanisms that are needed to enable IPv6 mesh over Bluetooth Low Energy links established by using the Bluetooth Internet Protocol Support Profile. This document does not specify the routing protocol to be used in an IPv6 mesh over Bluetooth LE links.Preprin
Device discovery and context registration in static context header compression networks
Due to the limited bandwidth of Low-Power Wide-Area Networks (LPWAN), the application layer is currently often tied straight above the link layer, limiting the evolution of sensor networks distributed over a large area. Consequently, the highly efficient Static Context Header Compression (SCHC) standard was introduced, where devices can compress the IPv6 and upper layer protocols down to a single byte. This approach, however, assumes that every compression context is distributed before deployment, again limiting the evolution of such networks. Therefore, this paper presents two context registration mechanisms leveraging on the SCHC adaptation layer. This is done by analyzing current registration solutions in order to find limitations and optimizations with regard to very constrained networks. Both solutions and the current State-of-The-Art (SoTA) are evaluated in a Lightweight Machine to Machine (LwM2M) environment. In such situation, both developed solutions decrease the energy consumption already after 25 transmissions, compared with the current SoTA. Furthermore, simulations show that Long Range (LoRa) devices still have a 80% chance to successfully complete the registration flow in a network with a 50% Packet Error Ratio. Briefly, the work presented in this paper delivers bootstrapping tools to constrained, SCHC-enabled networks while still being able to reduce energy consumption
IETF standardization in the field of the Internet of Things (IoT): a survey
Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there have been many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. In this paper, we will briefly review the history of integrating constrained devices into the Internet, followed by an extensive overview of IETF standardization work in the 6LoWPAN, ROLL and CoRE working groups. This is complemented with a broad overview of related research results that illustrate how this work can be extended or used to tackle other problems and with a discussion on open issues and challenges. As such the aim of this paper is twofold: apart from giving readers solid insights in IETF standardization work on the Internet of Things, it also aims to encourage readers to further explore the world of Internet-connected objects, pointing to future research opportunities
Routing and Mobility on IPv6 over LoWPAN
The IoT means a world-wide network of interconnected objects based on standard communication
protocols. An object in this context is a quotidian physical device augmented with
sensing/actuating, processing, storing and communication capabilities. These objects must be
able to interact with the surrounding environment where they are placed and to cooperate with
neighbouring objects in order to accomplish a common objective. The IoT objects have also the
capabilities of converting the sensed data into automated instructions and communicating them
to other objects through the communication networks, avoiding the human intervention in several
tasks. Most of IoT deployments are based on small devices with restricted computational
resources and energy constraints. For this reason, initially the scientific community did not
consider the use of IP protocol suite in this scenarios because there was the perception that it
was too heavy to the available resources on such devices. Meanwhile, the scientific community
and the industry started to rethink about the use of IP protocol suite in all IoT devices and now
it is considered as the solution to provide connectivity between the IoT devices, independently
of the Layer 2 protocol in use, and to connect them to the Internet. Despite the use of IP suite
protocol in all devices and the amount of solutions proposed, many open issues remain unsolved
in order to reach a seamless integration between the IoT and the Internet and to provide the
conditions to IoT service widespread. This thesis addressed the challenges associated with the
interconnectivity between the Internet and the IoT devices and with the security aspects of
the IoT. In the interconnectivity between the IoT devices and the Internet the problem is how
to provide valuable information to the Internet connected devices, independently of the supported
IP protocol version, without being necessary accessed directly to the IoT nodes. In order
to solve this problem, solutions based on Representational state transfer (REST) web services
and IPv4 to IPv6 dual stack transition mechanism were proposed and evaluated. The REST web
service and the transition mechanism runs only at the border router without penalizing the IoT
constrained devices. The mitigation of the effects of internal and external security attacks
minimizing the overhead imposed on the IoT devices is the security challenge addressed in this
thesis. Three different solutions were proposed. The first is a mechanism to prevent remotely
initiated transport level Denial of Service attacks that avoids the use of inefficient and hard to
manage traditional firewalls. It is based on filtering at the border router the traffic received
from the Internet and destined to the IoT network according to the conditions announced by
each IoT device. The second is a network access security framework that can be used to control
the nodes that have access to the network, based on administrative approval, and to enforce
security compliance to the authorized nodes. The third is a network admission control framework
that prevents IoT unauthorized nodes to communicate with IoT authorized nodes or with
the Internet, which drastically reduces the number of possible security attacks. The network
admission control was also exploited as a management mechanism as it can be used to manage
the network size in terms of number of nodes, making the network more manageable, increasing
its reliability and extending its lifetime.A IoT (Internet of Things) tem suscitado o interesse tanto da comunidade académica como
da indústria, uma vez que os campos de aplicação são inúmeros assim como os potenciais ganhos
que podem ser obtidos através do uso deste tipo de tecnologia. A IoT significa uma rede
global de objetos ligados entre si através de uma rede de comunicações baseada em protocolos
standard. Neste contexto, um objeto é um objeto físico do dia a dia ao qual foi adicionada a
capacidade de medir e de atuar sobre variáveis físicas, de processar e armazenar dados e de
comunicar. Estes objetos têm a capacidade de interagir com o meio ambiente envolvente e de
cooperar com outros objetos vizinhos de forma a atingirem um objetivo comum. Estes objetos
também têm a capacidade de converter os dados lidos em instruções e de as comunicar a outros
objetos através da rede de comunicações, evitando desta forma a intervenção humana em
diversas tarefas. A maior parte das concretizações de sistemas IoT são baseados em pequenos
dispositivos autónomos com restrições ao nível dos recursos computacionais e de retenção de
energia. Por esta razão, inicialmente a comunidade científica não considerou adequado o uso
da pilha protocolar IP neste tipo de dispositivos, uma vez que havia a perceção de que era muito
pesada para os recursos computacionais disponíveis. Entretanto, a comunidade científica e a
indústria retomaram a discussão acerca dos benefícios do uso da pilha protocolar em todos os
dispositivos da IoT e atualmente é considerada a solução para estabelecer a conetividade entre
os dispositivos IoT independentemente do protocolo da camada dois em uso e para os ligar à
Internet. Apesar do uso da pilha protocolar IP em todos os dispositivos e da quantidade de
soluções propostas, são vários os problemas por resolver no que concerne à integração contínua
e sem interrupções da IoT na Internet e de criar as condições para a adoção generalizada deste
tipo de tecnologias.
Esta tese versa sobre os desafios associados à integração da IoT na Internet e dos aspetos de
segurança da IoT. Relativamente à integração da IoT na Internet o problema é como fornecer
informação válida aos dispositivos ligados à Internet, independentemente da versão do protocolo
IP em uso, evitando o acesso direto aos dispositivos IoT. Para a resolução deste problema foram
propostas e avaliadas soluções baseadas em web services REST e em mecanismos de transição
IPv4 para IPv6 do tipo pilha dupla (dual stack). O web service e o mecanismo de transição são
suportados apenas no router de fronteira, sem penalizar os dispositivos IoT. No que concerne
à segurança, o problema é mitigar os efeitos dos ataques de segurança internos e externos
iniciados local e remotamente. Foram propostas três soluções diferentes, a primeira é um
mecanismo que minimiza os efeitos dos ataques de negação de serviço com origem na Internet e
que evita o uso de mecanismos de firewalls ineficientes e de gestão complexa. Este mecanismo
filtra no router de fronteira o tráfego com origem na Internet é destinado à IoT de acordo
com as condições anunciadas por cada um dos dispositivos IoT da rede. A segunda solução,
é uma framework de network admission control que controla quais os dispositivos que podem
aceder à rede com base na autorização administrativa e que aplica políticas de conformidade
relativas à segurança aos dispositivos autorizados. A terceira é um mecanismo de network
admission control para redes 6LoWPAN que evita que dispositivos não autorizados comuniquem
com outros dispositivos legítimos e com a Internet o que reduz drasticamente o número de
ataques à segurança. Este mecanismo também foi explorado como um mecanismo de gestão uma
vez que pode ser utilizado a dimensão da rede quanto ao número de dispositivos, tornando-a
mais fácil de gerir e aumentando a sua fiabilidade e o seu tempo de vida
Neighbor Discovery Proxy-Gateway for 6LoWPAN-based Wireless Sensor Networks
El propósito de este trabajo es el estudio de métodos para la interconexión de redes personales inalámbricas de área local de bajo consumo y redes de computadores tradicionales. En particular, este proyecto analiza los protocolos de red involucrados así como las posibles formas de interoperabilidad entre ellos, teniendo como meta la integración de redes inalámbricas de sensores IEEE 802.15.4 basadas en 6LoWPAN (una capa de adaptación que hace posible el transporte de paquetes IPv6 sobre IEEE 802.15.4) en redes Ethernet ya existentes, sin necesidad de cambios en la infraestructura de red. Dicha integración permitiría el desarrollo y expansión de aplicaciones de usuario utilizando la tradicional pila de protocolos TCP/IP en sistemas compuestos por dispositivos empotrados de bajo coste y bajo consumo. Para probar la viabilidad de los métodos desarrollados, se diseña, implementa y evalúa un sistema empotrado cuya función es llevar a cabo las tareas de integración descritas
IETF standardization in the field of the internet of things (IoT): a survey
Smart embedded objects will become an important part of what is called the Internet of Things. However, the integration of embedded devices into the Internet introduces several challenges, since many of the existing Internet technologies and protocols were not designed for this class of devices. In the past few years, there have been many efforts to enable the extension of Internet technologies to constrained devices. Initially, this resulted in proprietary protocols and architectures. Later, the integration of constrained devices into the Internet was embraced by IETF, moving towards standardized IP-based protocols. In this paper, we will briefly review the history of integrating constrained devices into the Internet, followed by an extensive overview of IETF standardization work in the 6LoWPAN, ROLL and CoRE working groups. This is complemented with a broad overview of related research results that illustrate how this work can be extended or used to tackle other problems and with a discussion on open issues and challenges. As such the aim of this paper is twofold: apart from giving readers solid insights in IETF standardization work on the Internet of Things, it also aims to encourage readers to further explore the world of Internet-connected objects, pointing to future research opportunities.The research leading to these results has received funding from the European Union’s Seventh Framework Programme (FP7/2007-2013) under grant agreement no 258885 (SPITFIRE project), from the iMinds ICON projects GreenWeCan and O’CareCloudS, a FWO postdoc grant for Eli De Poorter and a VLIR PhD scholarship to Isam Ishaq
Discovery and Group Communication for Constrained Internet of Things Devices using the Constrained Application Protocol
The ubiquitous Internet is rapidly spreading to new domains. This expansion of
the Internet is comparable in scale to the spread of the Internet in the ’90s. The
resulting Internet is now commonly referred to as the Internet of Things (IoT) and
is expected to connect about 50 billion devices by the year 2020. This means that
in just five years from the time of writing this PhD the number of interconnected
devices will exceed the number of humans by sevenfold. It is further expected that
the majority of these IoT devices will be resource constrained embedded devices
such as sensors and actuators. Sensors collect information about the physical world
and inject this information into the virtual world. Next processing and reasoning
can occur and decisions can be taken to enact upon the physical world by injecting
feedback to actuators.
The integration of embedded devices into the Internet introduces new challenges,
since many of the existing Internet technologies and protocols were not
designed for this class of constrained devices. These devices are typically optimized
for low cost and power consumption and thus have very limited power,
memory, and processing resources and have long sleep periods. The networks
formed by these embedded devices are also constrained and have different characteristics
than those typical in todays Internet. These constrained networks have
high packet loss, low throughput, frequent topology changes and small useful payload
sizes. They are referred to as LLN. Therefore, it is in most cases unfeasible to
run standard Internet protocols on this class of constrained devices and/or LLNs.
New or adapted protocols that take into consideration the capabilities of the constrained
devices and the characteristics of LLNs, are required.
In the past few years, there were many efforts to enable the extension of the
Internet technologies to constrained devices. Initially, most of these efforts were
focusing on the networking layer. However, the expansion of the Internet in the
90s was not due to introducing new or better networking protocols. It was a result
of introducing the World Wide Web (WWW), which made it easy to integrate services
and applications. One of the essential technologies underpinning the WWW
was the Hypertext Transfer Protocol (HTTP). Today, HTTP has become a key
protocol in the realization of scalable web services building around the Representational
State Transfer (REST) paradigm. The REST architectural style enables
the realization of scalable and well-performing services using uniform and simple
interfaces. The availability of an embedded counterpart of HTTP and the REST
architecture could boost the uptake of the IoT.
Therefore, more recently, work started to allow the integration of constrained
devices in the Internet at the service level. The Internet Engineering Task Force
(IETF) Constrained RESTful Environments (CoRE) working group has realized
the REST architecture in a suitable form for the most constrained nodes and networks.
To that end the Constrained Application Protocol (CoAP) was introduced,
a specialized RESTful web transfer protocol for use with constrained networks and
nodes. CoAP realizes a subset of the REST mechanisms offered by HTTP, but is
optimized for Machine-to-Machine (M2M) applications.
This PhD research builds upon CoAP to enable a better integration of constrained
devices in the IoT and examines proposed CoAP solutions theoretically
and experimentally proposing alternatives when appropriate. The first part of this
PhD proposes a mechanism that facilitates the deployment of sensor networks
and enables the discovery, end-to-end connectivity and service usage of newly
deployed sensor nodes. The proposed approach makes use of CoAP and combines
it with Domain Name System (DNS) in order to enable the use of userfriendly
Fully Qualified Domain Names (FQDNs) for addressing sensor nodes. It
includes the automatic discovery of sensors and sensor gateways and the translation
of HTTP to CoAP, thus making the sensor resources globally discoverable and
accessible from any Internet-connected client using either IPv6 addresses or DNS
names both via HTTP or CoAP. As such, the proposed approach provides a feasible
and flexible solution to achieve hierarchical self-organization with a minimum
of pre-configuration. By doing so we minimize costly human interventions and
eliminate the need for introducing new protocols dedicated for the discovery and
organization of resources. This reduces both cost and the implementation footprint
on the constrained devices.
The second, larger, part of this PhD focuses on using CoAP to realize communication
with groups of resources. In many IoT application domains, sensors
or actuators need to be addressed as groups rather than individually, since individual
resources might not be sufficient or useful. A simple example is that all
lights in a room should go on or off as a result of the user toggling the light switch.
As not all IoT applications may need group communication, the CoRE working
group did not include it in the base CoAP specification. This way the base protocol
is kept as efficient and as simple as possible so it would run on even the most
constrained devices. Group communication and other features that might not be
needed by all devices are standardized in a set of optional separate extensions. We
first examined the proposed CoAP extension for group communication, which utilizes
Internet Protocol version 6 (IPv6) multicasts. We highlight its strengths and
weaknesses and propose our own complementary solution that uses unicast to realize
group communication. Our solution offers capabilities beyond simple group
communication. For example, we provide a validation mechanism that performs
several checks on the group members, to make sure that combining them together
is possible. We also allow the client to request that results of the individual members
are processed before they are sent to the client. For example, the client can
request to obtain only the maximum value of all individual members.
Another important optional extension to CoAP allows clients to continuously
observe resources by registering their interest in receiving notifications from CoAP
servers once there are changes to the values of the observed resources. By using
this publish/subscribe mechanism the client does not need to continuously poll the
resource to find out whether it has changed its value. This typically leads to more
efficient communication patterns that preserve valuable device and LLN resources.
Unfortunately CoAP observe does not work together with the CoAP group communication
extension, since the observe extension assumes unicast communication
while the group communication extension only support multicast communication.
In this PhD we propose to extend our own group communication solution to offer
group observation capabilities. By combining group observation with group
processing features, it becomes possible to notify the client only about certain
changes to the observed group (e.g., the maximum value of all group members has
changed).
Acknowledging that the use of multicast as well as unicast has strengths and
weaknesses we propose to extend our unicast based solution with certain multicast
features. By doing so we try to combine the strengths of both approaches to obtain
a better overall group communication that is flexible and that can be tailored
according to the use case needs.
Together, the proposed mechanisms represent a powerful and comprehensive
solution to the challenging problem of group communication with constrained devices.
We have evaluated the solutions proposed in this PhD extensively and in
a variety of forms. Where possible, we have derived theoretical models and have
conducted numerous simulations to validate them. We have also experimentally
evaluated those solutions and compared them with other proposed solutions using
a small demo box and later on two large scale wireless sensor testbeds and under
different test conditions. The first testbed is located in a large, shielded room,
which allows testing under controlled environments. The second testbed is located
inside an operational office building and thus allows testing under normal operation
conditions. Those tests revealed performance issues and some other problems.
We have provided some solutions and suggestions for tackling those problems.
Apart from the main contributions, two other relevant outcomes of this PhD are
described in the appendices. In the first appendix we review the most important
IETF standardization efforts related to the IoT and show that with the introduction
of CoAP a complete set of standard protocols has become available to cover the
complete networking stack and thus making the step from the IoT into the Web
of Things (WoT). Using only standard protocols makes it possible to integrate
devices from various vendors into one bigWoT accessible to humans and machines
alike.
In the second appendix, we provide an alternative solution for grouping constrained
devices by using virtualization techniques. Our approach focuses on the
objects, both resource-constrained and non-constrained, that need to cooperate
by integrating them into a secured virtual network, named an Internet of Things
Virtual Network or IoT-VN. Inside this IoT-VN full end-to-end communication
can take place through the use of protocols that take the limitations of the most
resource-constrained devices into account. We describe how this concept maps to
several generic use cases and, as such, can constitute a valid alternative approach
for supporting selected applications
- …