Energy Saving Techniques for Phase Change Memory (PCM)

In recent years, the energy consumption of computing systems has increased and a large fraction of this energy is consumed in main memory. Towards this, researchers have proposed use of non-volatile memory, such as phase change memory (PCM), which has low read latency and power; and nearly zero leakage power. However, the write latency and power of PCM are very high and this, along with limited write endurance of PCM present significant challenges in enabling wide-spread adoption of PCM. To address this, several architecture-level techniques have been proposed. In this report, we review several techniques to manage power consumption of PCM. We also classify these techniques based on their characteristics to provide insights into them. The aim of this work is encourage researchers to propose even better techniques for improving energy efficiency of PCM based main memory.Comment: Survey, phase change RAM (PCRAM

Exploiting Inter- and Intra-Memory Asymmetries for Data Mapping in Hybrid Tiered-Memories

Modern computing systems are embracing hybrid memory comprising of DRAM and non-volatile memory (NVM) to combine the best properties of both memory technologies, achieving low latency, high reliability, and high density. A prominent characteristic of DRAM-NVM hybrid memory is that it has NVM access latency much higher than DRAM access latency. We call this inter-memory asymmetry. We observe that parasitic components on a long bitline are a major source of high latency in both DRAM and NVM, and a significant factor contributing to high-voltage operations in NVM, which impact their reliability. We propose an architectural change, where each long bitline in DRAM and NVM is split into two segments by an isolation transistor. One segment can be accessed with lower latency and operating voltage than the other. By introducing tiers, we enable non-uniform accesses within each memory type (which we call intra-memory asymmetry), leading to performance and reliability trade-offs in DRAM-NVM hybrid memory. We extend existing NVM-DRAM OS in three ways. First, we exploit both inter- and intra-memory asymmetries to allocate and migrate memory pages between the tiers in DRAM and NVM. Second, we improve the OS's page allocation decisions by predicting the access intensity of a newly-referenced memory page in a program and placing it to a matching tier during its initial allocation. This minimizes page migrations during program execution, lowering the performance overhead. Third, we propose a solution to migrate pages between the tiers of the same memory without transferring data over the memory channel, minimizing channel occupancy and improving performance. Our overall approach, which we call MNEME, to enable and exploit asymmetries in DRAM-NVM hybrid tiered memory improves both performance and reliability for both single-core and multi-programmed workloads.Comment: 15 pages, 29 figures, accepted at ACM SIGPLAN International Symposium on Memory Managemen

Implications of non-volatile memory as primary storage for database management systems

Traditional Database Management System (DBMS) software relies on hard disks for storing relational data. Hard disks are cheap, persistent, and offer huge storage capacities. However, data retrieval latency for hard disks is extremely high. To hide this latency, DRAM is used as an intermediate storage. DRAM is significantly faster than disk, but deployed in smaller capacities due to cost and power constraints, and without the necessary persistency feature that disks have. Non-Volatile Memory (NVM) is an emerging storage class technology which promises the best of both worlds. It can offer large storage capacities, due to better scaling and cost metrics than DRAM, and is non-volatile (persistent) like hard disks. At the same time, its data retrieval time is much lower than that of hard disks and it is also byte-addressable like DRAM. In this paper, we explore the implications of employing NVM as primary storage for DBMS. In other words, we investigate the modifications necessary to be applied on a traditional relational DBMS to take advantage of NVM features. As a case study, we have modified the storage engine (SE) of PostgreSQL enabling efficient use of NVM hardware. We detail the necessary changes and challenges such modifications entail and evaluate them using a comprehensive emulation platform. Results indicate that our modified SE reduces query execution time by up to 40% and 14.4% when compared to disk and NVM storage, with average reductions of 20.5% and 4.5%, respectively.The research leading to these results has received funding from the European Union’s 7th Framework Programme under grant agreement number 318633, the Ministry of Science and Technology of Spain under contract TIN2015-65316-P, and a HiPEAC collaboration grant awarded to Naveed Ul Mustafa.Peer ReviewedPostprint (author's final draft

Improving Phase Change Memory Performance with Data Content Aware Access

A prominent characteristic of write operation in Phase-Change Memory (PCM) is that its latency and energy are sensitive to the data to be written as well as the content that is overwritten. We observe that overwriting unknown memory content can incur significantly higher latency and energy compared to overwriting known all-zeros or all-ones content. This is because all-zeros or all-ones content is overwritten by programming the PCM cells only in one direction, i.e., using either SET or RESET operations, not both. In this paper, we propose data content aware PCM writes (DATACON), a new mechanism that reduces the latency and energy of PCM writes by redirecting these requests to overwrite memory locations containing all-zeros or all-ones. DATACON operates in three steps. First, it estimates how much a PCM write access would benefit from overwriting known content (e.g., all-zeros, or all-ones) by comprehensively considering the number of set bits in the data to be written, and the energy-latency trade-offs for SET and RESET operations in PCM. Second, it translates the write address to a physical address within memory that contains the best type of content to overwrite, and records this translation in a table for future accesses. We exploit data access locality in workloads to minimize the address translation overhead. Third, it re-initializes unused memory locations with known all-zeros or all-ones content in a manner that does not interfere with regular read and write accesses. DATACON overwrites unknown content only when it is absolutely necessary to do so. We evaluate DATACON with workloads from state-of-the-art machine learning applications, SPEC CPU2017, and NAS Parallel Benchmarks. Results demonstrate that DATACON significantly improves system performance and memory system energy consumption compared to the best of performance-oriented state-of-the-art techniques.Comment: 18 pages, 21 figures, accepted at ACM SIGPLAN International Symposium on Memory Management (ISMM

Memory Subsystems for Security, Consistency, and Scalability

In response to the continuous demand for the ability to process ever larger datasets, as well as discoveries in next-generation memory technologies, researchers have been vigorously studying memory-driven computing architectures that shall allow data-intensive applications to access enormous amounts of pooled non-volatile memory. As applications continue to interact with increasing amounts of components and datasets, existing systems struggle to eÿciently enforce the principle of least privilege for security. While non-volatile memory can retain data even after a power loss and allow for large main memory capacity, programmers have to bear the burdens of maintaining the consistency of program memory for fault tolerance as well as handling huge datasets with traditional yet expensive memory management interfaces for scalability. Today’s computer systems have become too sophisticated for existing memory subsystems to handle many design requirements. In this dissertation, we introduce three memory subsystems to address challenges in terms of security, consistency, and scalability. Specifcally, we propose SMVs to provide threads with fne-grained control over access privileges for a partially shared address space for security, NVthreads to allow programmers to easily leverage nonvolatile memory with automatic persistence for consistency, and PetaMem to enable memory-centric applications to freely access memory beyond the traditional process boundary with support for memory isolation and crash recovery for security, consistency, and scalability

KAVUAKA: a low-power application-specific processor architecture for digital hearing aids

The power consumption of digital hearing aids is very restricted due to their small physical size and the available hardware resources for signal processing are limited. However, there is a demand for more processing performance to make future hearing aids more useful and smarter. Future hearing aids should be able to detect, localize, and recognize target speakers in complex acoustic environments to further improve the speech intelligibility of the individual hearing aid user. Computationally intensive algorithms are required for this task. To maintain acceptable battery life, the hearing aid processing architecture must be highly optimized for extremely low-power consumption and high processing performance.The integration of application-specific instruction-set processors (ASIPs) into hearing aids enables a wide range of architectural customizations to meet the stringent power consumption and performance requirements. In this thesis, the application-specific hearing aid processor KAVUAKA is presented, which is customized and optimized with state-of-the-art hearing aid algorithms such as speaker localization, noise reduction, beamforming algorithms, and speech recognition. Specialized and application-specific instructions are designed and added to the baseline instruction set architecture (ISA). Among the major contributions are a multiply-accumulate (MAC) unit for real- and complex-valued numbers, architectures for power reduction during register accesses, co-processors and a low-latency audio interface. With the proposed MAC architecture, the KAVUAKA processor requires 16 % less cycles for the computation of a 128-point fast Fourier transform (FFT) compared to related programmable digital signal processors. The power consumption during register file accesses is decreased by 6 %to 17 % with isolation and by-pass techniques. The hardware-induced audio latency is 34 %lower compared to related audio interfaces for frame size of 64 samples.The final hearing aid system-on-chip (SoC) with four KAVUAKA processor cores and ten co-processors is integrated as an application-specific integrated circuit (ASIC) using a 40 nm low-power technology. The die size is 3.6 mm2. Each of the processors and co-processors contains individual customizations and hardware features with a varying datapath width between 24-bit to 64-bit. The core area of the 64-bit processor configuration is 0.134 mm2. The processors are organized in two clusters that share memory, an audio interface, co-processors and serial interfaces. The average power consumption at a clock speed of 10 MHz is 2.4 mW for SoC and 0.6 mW for the 64-bit processor.Case studies with four reference hearing aid algorithms are used to present and evaluate the proposed hardware architectures and optimizations. The program code for each processor and co-processor is generated and optimized with evolutionary algorithms for operation merging,instruction scheduling and register allocation. The KAVUAKA processor architecture is com-pared to related processor architectures in terms of processing performance, average power consumption, and silicon area requirements

Design and Code Optimization for Systems with Next-generation Racetrack Memories

With the rise of computationally expensive application domains such as machine learning, genomics, and fluids simulation, the quest for performance and energy-efficient computing has gained unprecedented momentum. The significant increase in computing and memory devices in modern systems has resulted in an unsustainable surge in energy consumption, a substantial portion of which is attributed to the memory system. The scaling of conventional memory technologies and their suitability for the next-generation system is also questionable. This has led to the emergence and rise of nonvolatile memory ( NVM ) technologies. Today, in different development stages, several NVM technologies are competing for their rapid access to the market. Racetrack memory ( RTM ) is one such nonvolatile memory technology that promises SRAM -comparable latency, reduced energy consumption, and unprecedented density compared to other technologies. However, racetrack memory ( RTM ) is sequential in nature, i.e., data in an RTM cell needs to be shifted to an access port before it can be accessed. These shift operations incur performance and energy penalties. An ideal RTM , requiring at most one shift per access, can easily outperform SRAM . However, in the worst-cast shifting scenario, RTM can be an order of magnitude slower than SRAM . This thesis presents an overview of the RTM device physics, its evolution, strengths and challenges, and its application in the memory subsystem. We develop tools that allow the programmability and modeling of RTM -based systems. For shifts minimization, we propose a set of techniques including optimal, near-optimal, and evolutionary algorithms for efficient scalar and instruction placement in RTMs . For array accesses, we explore schedule and layout transformations that eliminate the longer overhead shifts in RTMs . We present an automatic compilation framework that analyzes static control flow programs and transforms the loop traversal order and memory layout to maximize accesses to consecutive RTM locations and minimize shifts. We develop a simulation framework called RTSim that models various RTM parameters and enables accurate architectural level simulation. Finally, to demonstrate the RTM potential in non-Von-Neumann in-memory computing paradigms, we exploit its device attributes to implement logic and arithmetic operations. As a concrete use-case, we implement an entire hyperdimensional computing framework in RTM to accelerate the language recognition problem. Our evaluation shows considerable performance and energy improvements compared to conventional Von-Neumann models and state-of-the-art accelerators

The Design of A High Capacity and Energy Efficient Phase Change Main Memory

Higher energy-efficiency has become essential in servers for a variety of reasons that range from heavy power and thermal constraints, environmental issues and financial savings. With main memory responsible for at least 30% of the energy consumed by a server, a low power main memory is fundamental to achieving this energy efficiency DRAM has been the technology of choice for main memory for the last three decades primarily because it traditionally combined relatively low power, high performance, low cost and high density. However, with DRAM nearing its density limit, alternative low-power memory technologies, such as Phase-change memory (PCM), have become a feasible replacement. PCM limitations, such as limited endurance and low write performance, preclude simple drop-in replacement and require new architectures and algorithms to be developed. A PCM main memory architecture (PMMA) is introduced in this dissertation, utilizing both DRAM and PCM, to create an energy-efficient main memory that is able to replace a DRAM-only memory. PMMA utilizes a number of techniques and architectural changes to achieve a level of performance that is par with DRAM. PMMA achieves gains in energy-delay of up to 65%, with less than 5% of performance loss and extremely high energy gains. To address the other major shortcoming of PCM, namely limited endurance, a novel, low- overhead wear-leveling algorithm that builds on PMMA is proposed that increases the lifetime of PMMA to match the expected server lifetime so that both server and memory subsystems become obsolete at about the same time. We also study how to better use the excess capacity, traditionally available on PCM devices, to obtain the highest lifetime possible. We show that under specific endurance distributions, the naive choice does not achieve the highest lifetime. We devise rules that empower the designer to select algorithms and parameters to achieve higher lifetime or simplify the design knowing the impact on the lifetime. The techniques presented also apply to other storage class memories (SCM) memories that suffer from limited endurance

Energy-Aware Data Movement In Non-Volatile Memory Hierarchies

While technology scaling enables increased density for memory cells, the intrinsic high leakage power of conventional CMOS technology and the demand for reduced energy consumption inspires the use of emerging technology alternatives such as eDRAM and Non-Volatile Memory (NVM) including STT-MRAM, PCM, and RRAM. The utilization of emerging technology in Last Level Cache (LLC) designs which occupies a signifcant fraction of total die area in Chip Multi Processors (CMPs) introduces new dimensions of vulnerability, energy consumption, and performance delivery. To be specific, a part of this research focuses on eDRAM Bit Upset Vulnerability Factor (BUVF) to assess vulnerable portion of the eDRAM refresh cycle where the critical charge varies depending on the write voltage, storage and bit-line capacitance. This dissertation broaden the study on vulnerability assessment of LLC through investigating the impact of Process Variations (PV) on narrow resistive sensing margins in high-density NVM arrays, including on-chip cache and primary memory. Large-latency and power-hungry Sense Amplifers (SAs) have been adapted to combat PV in the past. Herein, a novel approach is proposed to leverage the PV in NVM arrays using Self-Organized Sub-bank (SOS) design. SOS engages the preferred SA alternative based on the intrinsic as-built behavior of the resistive sensing timing margin to reduce the latency and power consumption while maintaining acceptable access time. On the other hand, this dissertation investigates a novel technique to prioritize the service to 1) Extensive Read Reused Accessed blocks of the LLC that are silently dropped from higher levels of cache, and 2) the portion of the working set that may exhibit distant re-reference interval in L2. In particular, we develop a lightweight Multi-level Access History Profiler to effciently identify ERRA blocks through aggregating the LLC block addresses tagged with identical Most Signifcant Bits into a single entry. Experimental results indicate that the proposed technique can reduce the L2 read miss ratio by 51.7% on average across PARSEC and SPEC2006 workloads. In addition, this dissertation will broaden and apply advancements in theories of subspace recovery to pioneer computationally-aware in-situ operand reconstruction via the novel Logic In Interconnect (LI2) scheme. LI2 will be developed, validated, and re?ned both theoretically and experimentally to realize a radically different approach to post-Moore\u27s Law computing by leveraging low-rank matrices features offering data reconstruction instead of fetching data from main memory to reduce energy/latency cost per data movement. We propose LI2 enhancement to attain high performance delivery in the post-Moore\u27s Law era through equipping the contemporary micro-architecture design with a customized memory controller which orchestrates the memory request for fetching low-rank matrices to customized Fine Grain Reconfigurable Accelerator (FGRA) for reconstruction while the other memory requests are serviced as before. The goal of LI2 is to conquer the high latency/energy required to traverse main memory arrays in the case of LLC miss, by using in-situ construction of the requested data dealing with low-rank matrices. Thus, LI2 exchanges a high volume of data transfers with a novel lightweight reconstruction method under specific conditions using a cross-layer hardware/algorithm approach