5,290 research outputs found
Redundant disk arrays: Reliable, parallel secondary storage
During the past decade, advances in processor and memory technology have given rise to increases in computational performance that far outstrip increases in the performance of secondary storage technology. Coupled with emerging small-disk technology, disk arrays provide the cost, volume, and capacity of current disk subsystems, by leveraging parallelism, many times their performance. Unfortunately, arrays of small disks may have much higher failure rates than the single large disks they replace. Redundant arrays of inexpensive disks (RAID) use simple redundancy schemes to provide high data reliability. The data encoding, performance, and reliability of redundant disk arrays are investigated. Organizing redundant data into a disk array is treated as a coding problem. Among alternatives examined, codes as simple as parity are shown to effectively correct single, self-identifying disk failures
Self-Repairing Disk Arrays
As the prices of magnetic storage continue to decrease, the cost of replacing
failed disks becomes increasingly dominated by the cost of the service call
itself. We propose to eliminate these calls by building disk arrays that
contain enough spare disks to operate without any human intervention during
their whole lifetime. To evaluate the feasibility of this approach, we have
simulated the behavior of two-dimensional disk arrays with n parity disks and
n(n-1)/2 data disks under realistic failure and repair assumptions. Our
conclusion is that having n(n+1)/2 spare disks is more than enough to achieve a
99.999 percent probability of not losing data over four years. We observe that
the same objectives cannot be reached with RAID level 6 organizations and would
require RAID stripes that could tolerate triple disk failures.Comment: Part of ADAPT Workshop proceedings, 2015 (arXiv:1412.2347
Alpha Entanglement Codes: Practical Erasure Codes to Archive Data in Unreliable Environments
Data centres that use consumer-grade disks drives and distributed
peer-to-peer systems are unreliable environments to archive data without enough
redundancy. Most redundancy schemes are not completely effective for providing
high availability, durability and integrity in the long-term. We propose alpha
entanglement codes, a mechanism that creates a virtual layer of highly
interconnected storage devices to propagate redundant information across a
large scale storage system. Our motivation is to design flexible and practical
erasure codes with high fault-tolerance to improve data durability and
availability even in catastrophic scenarios. By flexible and practical, we mean
code settings that can be adapted to future requirements and practical
implementations with reasonable trade-offs between security, resource usage and
performance. The codes have three parameters. Alpha increases storage overhead
linearly but increases the possible paths to recover data exponentially. Two
other parameters increase fault-tolerance even further without the need of
additional storage. As a result, an entangled storage system can provide high
availability, durability and offer additional integrity: it is more difficult
to modify data undetectably. We evaluate how several redundancy schemes perform
in unreliable environments and show that alpha entanglement codes are flexible
and practical codes. Remarkably, they excel at code locality, hence, they
reduce repair costs and become less dependent on storage locations with poor
availability. Our solution outperforms Reed-Solomon codes in many disaster
recovery scenarios.Comment: The publication has 12 pages and 13 figures. This work was partially
supported by Swiss National Science Foundation SNSF Doc.Mobility 162014, 2018
48th Annual IEEE/IFIP International Conference on Dependable Systems and
Networks (DSN
Robo-line storage: Low latency, high capacity storage systems over geographically distributed networks
Rapid advances in high performance computing are making possible more complete and accurate computer-based modeling of complex physical phenomena, such as weather front interactions, dynamics of chemical reactions, numerical aerodynamic analysis of airframes, and ocean-land-atmosphere interactions. Many of these 'grand challenge' applications are as demanding of the underlying storage system, in terms of their capacity and bandwidth requirements, as they are on the computational power of the processor. A global view of the Earth's ocean chlorophyll and land vegetation requires over 2 terabytes of raw satellite image data. In this paper, we describe our planned research program in high capacity, high bandwidth storage systems. The project has four overall goals. First, we will examine new methods for high capacity storage systems, made possible by low cost, small form factor magnetic and optical tape systems. Second, access to the storage system will be low latency and high bandwidth. To achieve this, we must interleave data transfer at all levels of the storage system, including devices, controllers, servers, and communications links. Latency will be reduced by extensive caching throughout the storage hierarchy. Third, we will provide effective management of a storage hierarchy, extending the techniques already developed for the Log Structured File System. Finally, we will construct a protototype high capacity file server, suitable for use on the National Research and Education Network (NREN). Such research must be a Cornerstone of any coherent program in high performance computing and communications
CRAID: Online RAID upgrades using dynamic hot data reorganization
Current algorithms used to upgrade RAID arrays typically require large amounts of data to be migrated, even those that move only the minimum amount of data required to keep a balanced data load. This paper presents CRAID, a self-optimizing RAID array that performs an online block reorganization of frequently used, long-term accessed data in order to reduce this migration even further. To achieve this objective, CRAID tracks frequently used, long-term data blocks and copies them to a dedicated partition spread across all the disks in the array. When new disks are added, CRAID only needs to extend this process to the new devices to redistribute this partition, thus greatly reducing the overhead of the upgrade process. In addition, the reorganized access patterns within this partition improve the array’s performance, amortizing the copy overhead and allowing CRAID to offer a performance competitive with traditional RAIDs.
We describe CRAID’s motivation and design and we evaluate it by replaying seven real-world workloads including a file server, a web server and a user share. Our experiments show that CRAID can successfully detect hot data variations and begin using new disks as soon as they are added to the array. Also, the usage of a dedicated
partition improves the sequentiality of relevant data access, which amortizes the cost of reorganizations. Finally, we prove that a full-HDD CRAID array with a small distributed partition (<1.28% per disk) can compete in performance with an ideally restriped RAID-5 and a hybrid RAID-5 with a small SSD cache.Peer ReviewedPostprint (published version
A RAID reconfiguration scheme for gracefully degraded operations
One distinct advantage of Redundant Array of Independent Disks (RAID) is fault tolerance. But the performance of a disk array in degraded mode is so poor that no one uses the RAID after failure. Continuous operation of RAID in degraded mode is very important in many real time applications, which can not be interrupted in providing continuous services. In this paper, we propose an efficient architectural reconfiguration scheme to enhance the performance of RAID-5 in degraded mode, called reconfigurable RAID-5. It reconfigures RAID-5 to RPTD-0 in degraded mode. Using this scheme, the calculation of the failure data and the generation of parity in writing the new data to the failed disk can be reduced. It also alleviates the small write problem for RAID-5 in degraded mode. We use the phase parallel model to analyze the total execution time of the RAID-5 and of the reconfigurable RAID-5. Through theoretical analysis and benchmark test, we find the performance of the reconfigurable RAID-5 can be 200 times better than conventional RAID-5.published_or_final_versio
Introduction to Multiprocessor I/O Architecture
The computational performance of multiprocessors continues to improve by leaps and bounds, fueled in part by rapid improvements in processor and interconnection technology. I/O performance thus becomes ever more critical, to avoid becoming the bottleneck of system performance. In this paper we provide an introduction to I/O architectural issues in multiprocessors, with a focus on disk subsystems. While we discuss examples from actual architectures and provide pointers to interesting research in the literature, we do not attempt to provide a comprehensive survey. We concentrate on a study of the architectural design issues, and the effects of different design alternatives
- …