Integrated Assessment of Assembly fixtures Re-configurability

The needs of consumers are changing over time. As a result, the manufacturers are looking for new methods to adapt effectively and efficiently to market changes. These involve supplying customers with a variety of products in a reasonable time with decreasing the cost. Reconfigurable fixtures are an important means for dealing with increased product variety and shorter life cycles, as they help change between the product variants effectively and decrease the time and resources required to introduce new product variants. In this thesis, an integrated method to assess the reconfigurability of assembly fixtures is developed. This assessment is based on four core reconfigurability characteristics: scalability, modularity, convertibility, and customized flexibility. A clear definition of the scalability of the reconfigurable assembly fixtures was developed. A mathematical model for each characteristic of reconfigurable assembly fixtures was developed. Their indices were determined then combined using a radar plot to assess the reconfigurability of the reconfigurable assembly fixture. Welding tack fixture is chosen as a case study in this thesis. Two redesign recommendations were proposed. The results showed the most appropriate design with highest reconfigurability index because it was designed to produce the same number of product variants with less reconfiguration time, cost, effort, and complexity. The significance of research in this thesis is to help in the design stage of the assembly fixture by comparing different configurations for the assembly fixture to choose the best one and suggesting some changes for the assembly fixture design and configuration. This is essential to minimize the number of fixtures to be produced when the new part component/ variant is introduced

Recent research on flexible fixtures for manufacturing processes

Fixtures, are used to fixate, position and support workpieces, and form a crucial tool in manufacturing. Their performance influences the manufacturing (and assembly) process of a product. Furthermore, fixturing can form a significant portion of the needed investment and total process planning time for the manufacturing system. Many fixturing concepts, as contribution to increase the flexibility of the manufacturing system, are reported in the literature. The flexible fixturing designs can be classified into the following seven categories: modular fixtures, flexible pallet systems, sensor-based fixture design, phase-change based concepts, chuck-based concepts, pin-type array fixtures and automatically reconfigurable fixtures. It is observed that the more intelligent and automated fixturing systems are designed with the demands for automation in certain industries in mind. Furthermore, different fixturing solutions suit the engineering demands for different manufacturing areas, this means that for the foreseeable future all technologies will remain current. From the self-reconfigurable fixturing techniques a new fixturing capability is emerging: in process reconfigurability for the optimal placement of clamps and supports during the whole process time. These several concepts together with some recent patents are studied here. The paper concludes with some prospective research directions in the field of flexible fixturing

EFFICIENCY OF FLEXIBLE FIXTURES: DESIGN AND CONTROL

The manufacturing industries have been using flexible production technologies to meet the demand for customisation. As a part of production, fixtures have remained limited to dedicated technologies, even though numerous flexible fixtures have been studied and proposed by both academia and industry. The integration of flexible fixtures has shown that such efforts did not yield the anticipated performance and resulted in inefficiencies of cost and time. The fundamental formulation of this thesis addresses this issue and aims to increase the efficiency of flexible fixtures.To realise this aim, the research in this thesis poses three research questions. The first research question investigates the efficiency description of flexible fixtures in terms of the criteria. Relative to this, the second research question investigates the use of efficiency metrics to integrate efficiency criteria into a design procedure. Once the efficiency and design aspects have been established, the third research question investigates the active control of flexible fixtures to increase their efficiency. The results of this thesis derive from the outcome of seven studies investigating the automotive and aerospace industries. The results that answer the first research question use five criteria to establish the efficiency of flexible fixtures. These are: fundamental, flexibility, cost, time and quality. By incorporating design characteristics in respect of production system paradigms, each criterion is elaborated upon using relevant sub-criteria and metrics. Moreover, a comparative design procedure is presented for the second research question and comprising four stages (including mechanical, control and software aspects). Initially, the design procedure proposes conceptual design and verification stages to determine the most promising flexible fixture for a target production system. By executing detailed design and verification, the design procedure enables a fixture designer to finalise the flexible fixture and determine its efficiency. Furthermore, a novel parallel kinematics machine is presented to demonstrate the applicability of the design procedure’s analytical steps and illustrate how appropriate kinematic structures can facilitate the efficiency-orientated design of flexible fixtures.Based on the correlation established by the controller software’s design procedure, the active control of flexible fixtures directly affects the quality criterion of flexible fixture efficiency. This provides the answer to the third research question, on general control strategies for active control of flexible fixtures. The introduction of a system model and manipulator dynamics proposes force and position control strategies. It is shown that any flexible fixture using a kinematic class can be controlled, to regulate the force and position of a workpiece and ensure that process nominals are preserved. Moreover, using both direct and indirect force control strategies, a flexible fixture’s role in active control can be expanded into a system of actively controlled fixtures that are useful in various processes. Finally, a position controller is presented which has the capacity to regulate both periodic and non-periodic signals. This controller uses an additional feedforward scheme (based on the Hilbert transform) in parallel with a feedback mechanism. Thus, the position controller enables flexible fixtures to regulate the position of a workpiece in respect of any kind of disturbance

Active fixturing: literature review and future research directions

Fixtures are used to fixate, position and support workpieces and represent a crucial tool in manufacturing. Their performance determines the result of the whole manufacturing process of a product. There is a vast amount of research done on automatic fixture layout synthesis and optimisation and fixture design verification. Most of this work considers fixture mechanics to be static and the fixture elements to be passive. However, a new generation of fixtures has emerged that has actuated fixture elements for active control of the part–fixture system during manufacturing operations to increase the end product quality. This paper analyses the latest studies in the field of active fixture design and its relationship with flexible and reconfigurable fixturing systems. First, a brief introduction is given on the importance of research of fixturing systems. Secondly, the basics of workholding and fixture design are visited, after which the state-of-the-art in active fixturing and related concepts is presented. Fourthly, part–fixture dynamics and design strategies which take these into account are discussed. Fifthly, the control strategies used in active fixturing systems are examined. Finally, some final conclusions and prospective future research directions are presented

Robotic disassembly of electronic components to support end‐of‐life recycling of electric vehicles

This thesis reports on the research undertaken to analyse the factors affecting End-of-Life (EoL) recycling of future Electric Vehicles (EVs). The principle objective of the research is to generate an understanding of challenges and opportunities for the development and implementation of an automated robotic disassembly approach to aid with EoL management of electrical and electronic components within EVs. The research contributions are considered in three main parts. The first part contains a review of advancement in the development of automotive technology, and in particular the alternative fuel vehicles. A review of existing industrial recycling technologies and processes has been conducted which highlighted a number of key challenges in the adoption of current recycling technologies for EVs. The review concludes that there is a need to develop novel recycling technologies and processes to deal with the increased part complexity and material mixture in such vehicles. In this context, the second part of the research details a framework for EoL management of EV components. This framework presents a comprehensive automated robotic disassembly approach in which three specific steps are defined, namely manual disassembly to develop an understanding of product design, initial automated disassembly to test process capability, and optimisation and validation to improve repeatability and efficiency of the robotic disassembly operations. The framework also includes the development of a multi-criteria decision-making tool that assesses the environmental, technological and economic benefits of such robotic disassembly approach. The applicability of the research concepts has been demonstrated via three case studies. The results have highlighted the applicability of the automated robotic disassembly approach in a variety of scenarios of different design complexity and recovery rate. The results indicate that the adoption of this robotic disassembly enhances the pre-concentration of Strategically Important Materials (SIMs) and leads to minimisation of environmental impacts and increased material recovery value

A knowledge based approach to integration of products, processes and reconfigurable automation resources

The success of next generation automotive companies will depend upon their ability to adapt to ever changing market trends thus becoming highly responsive. In the automotive sector, the assembly line design and reconfiguration is an especially critical and extremely complex job. The current research addresses some of the aspects of this activity under the umbrella of a larger ongoing research project called Business Driven Automation (BDA) project. The BDA project aims to carry out complete virtual 3D modeling-based verifications of the assembly line for new or revised products in contrast to the prevalent practice of manual evaluation of effects of product change on physical resources. [Continues.

Reducing the acquisition cost of the next fighter jet using automation

The acquisition cost of fast-jets has increased exponentially since WWII, placing defence budgets under severe pressure. Fleet sizes are contracting as fewer new aircraft are ordered, and with new programmes few and far between the methods of assembling airframes have hardly changed in fifty-years. Modern airframes rely on traditional welded steel assembly fixtures and high accuracy machine tools, which represent a significant non-recurring cost that cannot be reconfigured for re-use on other programmes. This research investigates the use of automation to reduce the acquisition cost. Its aim is to demonstrate innovations, which will collectively assist in achieving the twin goals of Tempest, to be manufactured 50-percent faster and 50-percent cheaper, through the re-configuration and re-use of automation, creating a flexible factory-of-the-future. Two themes were explored, the UK-MOD’s acquisition process, to position this research in the timeframe of the next generation of fast-jet, and the use of automation in airframe assembly globally, specifically focusing on Measurement Assisted Assembly (MAA), part-to-part methods and predictive processes. A one-to-one scale demonstrator was designed, manufactured and assembled using MAA; and from the measurement data additively manufactured shims for the structure’s joints were produced. The key findings are that; metrology guided robots can position parts relative to one-another, to tolerances normally achieved using welded steel fixtures, maintaining their position for days, and can then be reconfigured to assemble another part of the structure. Drilling the parts during their manufacture on machine tools, using both conventional and angle-head tooling, enables them to be assembled, negating the requirement to use traditional craft-based skills to fit them. During the manufacture of the parts, interface data can be collected using various types of metrology, enabling them to be virtually assembled, creating a Digital Twin, from which any gaps between parts can be modelled and turned into a shim using an additive manufacturing process with the limitation that current AM machines do not produce layers thin enough to fully meet the shimming requirement. The acquisition process requires, a technology to be demonstrated at technology readiness level (TRL) 3 during the concept phase, and have a route-map to achieve TRL 6 in the development phase, following the assessment phase. The novel use of automation presented in this thesis has the potential to enable manufacturing assets to be re-configured and re-used, significantly reducing impacting the acquisition costs of future airframe programmes. Collectively the innovations presented can significantly reduce the estimated 75 percent of touch labour costs and 9 percent of non-recurring costs associated with assembling an airframe. These innovations will help to enable a digital transformation that, together with other Industry 4.0 technologies and methods, can collectively enable the automated manufacture of customised aerospace products in very-low volumes. This is of relevance not only to next generation fighter jets, but also to emerging sectors such as air-taxis

Optical method for inspecting surface defects inside a small bore

Most automotive powertrain parts made of castings have surface defects such as pores. However, detecting pores inside small diameter bores is a challenge because of the limited dimensional accessibility. Adding to this difficulty is the auto industry's desire to conduct the porosity inspection in-line, i.e. within the machining production cycle time of a part. A technique or equipment that meets these requirements currently does not exist. In order to meet these demands, it is necessary to develop an entire new methodology to inspect the inner surface of small diameter bores. This paper presents an innovative methodology to inspect the porosity of the inner surface of small bores and to provide their characteristics such as size and location. A prototype measurement system was built and tested in the lab. Experimental results showed the proposed method to be reliable and consistent.Peer Reviewedhttp://deepblue.lib.umich.edu/bitstream/2027.42/85431/1/mst10_1_015704.pd