Exploring HLS Coding Techniques to Achieve Desired Turbo Decoder Architectures

Software defined radio (SDR) platforms implement many digital signal processing algorithms. These can be accelerated on an FPGA to meet performance requirements. Due to the flexibility of SDR\u27s and continually evolving communications protocols, high level synthesis (HLS) is a promising alternative to standard handcrafted design flows. A crucial component in any SDR is the error correction codes (ECC). Turbo codes are a common ECC that are implemented on an FPGA due to their computational complexity. The goal of this thesis is to explore the HLS coding techniques required to produce a design that targets the desired hardware architecture and can reach handcrafted levels of performance. This work implemented three existing turbo decoder architectures with HLS to produce quality hardware which reaches handcrafted performance. Each targeted design was analyzed to determine its functionality and algorithm so a C implementation could be developed. Then the C code was modified and HLS directives were added to refine the design through the HLS tools. The process of code modification and processing through the HLS tools continued until the desired architecture and performance were reached. Each design was implemented and the bottlenecks were identified and dealt with through appropriate usage of directives and C style. The use of pipelining to bypass bottlenecks added a small overhead from the ramp-up and ramp-down of the pipeline, reducing the performance by at most 1.24%. The impact of the clock constraint set within the HLS tools was also explored. It was found that the clock period and resource usage estimate generated by the HLS tools is not accurate and all evaluations should occur after hardware synthesis

Concatenated Turbo/LDPC codes for deep space communications: performance and implementation

Deep space communications require error correction codes able to reach extremely low bit-error-rates, possibly with a steep waterfall region and without error floor. Several schemes have been proposed in the literature to achieve these goals. Most of them rely on the concatenation of different codes that leads to high hardware implementation complexity and poor resource sharing. This work proposes a scheme based on the concatenation of non-custom LDPC and turbo codes that achieves excellent error correction performance. Moreover, since both LDPC and turbo codes can be decoded with the BCJR algorithm, our preliminary results show that an efficient hardware architecture with high resource reuse can be designe

A High-Performance and Low-Complexity 5G LDPC Decoder: Algorithm and Implementation

5G New Radio (NR) has stringent demands on both performance and complexity for the design of low-density parity-check (LDPC) decoding algorithms and corresponding VLSI implementations. Furthermore, decoders must fully support the wide range of all 5G NR blocklengths and code rates, which is a significant challenge. In this paper, we present a high-performance and low-complexity LDPC decoder, tailor-made to fulfill the 5G requirements. First, to close the gap between belief propagation (BP) decoding and its approximations in hardware, we propose an extension of adjusted min-sum decoding, called generalized adjusted min-sum (GA-MS) decoding. This decoding algorithm flexibly truncates the incoming messages at the check node level and carefully approximates the non-linear functions of BP decoding to balance the error-rate and hardware complexity. Numerical results demonstrate that the proposed fixed-point GAMS has only a minor gap of 0.1 dB compared to floating-point BP under various scenarios of 5G standard specifications. Secondly, we present a fully reconfigurable 5G NR LDPC decoder implementation based on GA-MS decoding. Given that memory occupies a substantial portion of the decoder area, we adopt multiple data compression and approximation techniques to reduce 42.2% of the memory overhead. The corresponding 28nm FD-SOI ASIC decoder has a core area of 1.823 mm2 and operates at 895 MHz. It is compatible with all 5G NR LDPC codes and achieves a peak throughput of 24.42 Gbps and a maximum area efficiency of 13.40 Gbps/mm2 at 4 decoding iterations.Comment: 14 pages, 14 figure

Reliable and Low-Latency Fronthaul for Tactile Internet Applications

With the emergence of Cloud-RAN as one of the dominant architectural solutions for next-generation mobile networks, the reliability and latency on the fronthaul (FH) segment become critical performance metrics for applications such as the Tactile Internet. Ensuring FH performance is further complicated by the switch from point-to-point dedicated FH links to packet-based multi-hop FH networks. This change is largely justified by the fact that packet-based fronthauling allows the deployment of FH networks on the existing Ethernet infrastructure. This paper proposes to improve reliability and latency of packet-based fronthauling by means of multi-path diversity and erasure coding of the MAC frames transported by the FH network. Under a probabilistic model that assumes a single service, the average latency required to obtain reliable FH transport and the reliability-latency trade-off are first investigated. The analytical results are then validated and complemented by a numerical study that accounts for the coexistence of enhanced Mobile BroadBand (eMBB) and Ultra-Reliable Low-Latency (URLLC) services in 5G networks by comparing orthogonal and non-orthogonal sharing of FH resources.Comment: 11pages, 13 figures, 3 bio photo

Near-capacity fixed-rate and rateless channel code constructions

Fixed-rate and rateless channel code constructions are designed for satisfying conflicting design tradeoffs, leading to codes that benefit from practical implementations, whilst offering a good bit error ratio (BER) and block error ratio (BLER) performance. More explicitly, two novel low-density parity-check code (LDPC) constructions are proposed; the first construction constitutes a family of quasi-cyclic protograph LDPC codes, which has a Vandermonde-like parity-check matrix (PCM). The second construction constitutes a specific class of protograph LDPC codes, which are termed as multilevel structured (MLS) LDPC codes. These codes possess a PCM construction that allows the coexistence of both pseudo-randomness as well as a structure requiring a reduced memory. More importantly, it is also demonstrated that these benefits accrue without any compromise in the attainable BER/BLER performance. We also present the novel concept of separating multiple users by means of user-specific channel codes, which is referred to as channel code division multiple access (CCDMA), and provide an example based on MLS LDPC codes. In particular, we circumvent the difficulty of having potentially high memory requirements, while ensuring that each user’s bits in the CCDMA system are equally protected. With regards to rateless channel coding, we propose a novel family of codes, which we refer to as reconfigurable rateless codes, that are capable of not only varying their code-rate but also to adaptively modify their encoding/decoding strategy according to the near-instantaneous channel conditions. We demonstrate that the proposed reconfigurable rateless codes are capable of shaping their own degree distribution according to the nearinstantaneous requirements imposed by the channel, but without any explicit channel knowledge at the transmitter. Additionally, a generalised transmit preprocessing aided closed-loop downlink multiple-input multiple-output (MIMO) system is presented, in which both the channel coding components as well as the linear transmit precoder exploit the knowledge of the channel state information (CSI). More explicitly, we embed a rateless code in a MIMO transmit preprocessing scheme, in order to attain near-capacity performance across a wide range of channel signal-to-ratios (SNRs), rather than only at a specific SNR. The performance of our scheme is further enhanced with the aid of a technique, referred to as pilot symbol assisted rateless (PSAR) coding, whereby a predetermined fraction of pilot bits is appropriately interspersed with the original information bits at the channel coding stage, instead of multiplexing pilots at the modulation stage, as in classic pilot symbol assisted modulation (PSAM). We subsequently demonstrate that the PSAR code-aided transmit preprocessing scheme succeeds in gleaning more information from the inserted pilots than the classic PSAM technique, because the pilot bits are not only useful for sounding the channel at the receiver but also beneficial for significantly reducing the computational complexity of the rateless channel decoder

The Performance of Cooperative MIMO Scheme under Slow Fading Channel based on Fountain Code

Nowadays, the video calling, video on demand (VOD) and more services are desired for users. These services generate large traffic which requires special techniques for transmission without outages or failure during transmission operation. Fountain Code is the newest method in the encoding theory and it is handle designed to large data. Besides, modern MIMO channel gives higher capacity than traditional channel (SISO channel). This paper looks out of the performance of Fountain Code on MIMO Scheme under Slow Fading Channel. The results show the performance is the best on MIMO (DF). In addition, the performance increases by increasing in the number of receiver antennas. Keywords: Fountain Code, Luby Transform, Cooperative MIMO, Slow Fading, Bit Error Rate, Decode and Forward (DF)

VLSI decoding architectures: flexibility, robustness and performance

Stemming from previous studies on flexible LDPC decoders, this thesis work has been mainly focused on the development of flexible turbo and LDPC decoder designs, and on the narrowing of the power, area and speed gap they might present with respect to dedicated solutions. Additional studies have been carried out within the field of increased code performance and of decoder resiliency to hardware errors. The first chapter regroups several main contributions in the design and implementation of flexible channel decoders. The first part concerns the design of a Network-on-Chip (NoC) serving as an interconnection network for a partially parallel LDPC decoder. A best-fit NoC architecture is designed and a complete multi-standard turbo/LDPC decoder is designed and implemented. Every time the code is changed, the decoder must be reconfigured. A number of variables influence the duration of the reconfiguration process, starting from the involved codes down to decoder design choices. These are taken in account in the flexible decoder designed, and novel traffic reduction and optimization methods are then implemented. In the second chapter a study on the early stopping of iterations for LDPC decoders is presented. The energy expenditure of any LDPC decoder is directly linked to the iterative nature of the decoding algorithm. We propose an innovative multi-standard early stopping criterion for LDPC decoders that observes the evolution of simple metrics and relies on on-the-fly threshold computation. Its effectiveness is evaluated against existing techniques both in terms of saved iterations and, after implementation, in terms of actual energy saving. The third chapter portrays a study on the resilience of LDPC decoders under the effect of memory errors. Given that the purpose of channel decoders is to correct errors, LDPC decoders are intrinsically characterized by a certain degree of resistance to hardware faults. This characteristic, together with the soft nature of the stored values, results in LDPC decoders being affected differently according to the meaning of the wrong bits: ad-hoc error protection techniques, like the Unequal Error Protection devised in this chapter, can consequently be applied to different bits according to their significance. In the fourth chapter the serial concatenation of LDPC and turbo codes is presented. The concatenated FEC targets very high error correction capabilities, joining the performance of turbo codes at low SNR with that of LDPC codes at high SNR, and outperforming both current deep-space FEC schemes and concatenation-based FECs. A unified decoder for the concatenated scheme is subsequently propose

On the Design of Future Communication Systems with Coded Transport, Storage, and Computing

Communication systems are experiencing a fundamental change. There are novel applications that require an increased performance not only of throughput but also latency, reliability, security, and heterogeneity support from these systems. To fulfil the requirements, future systems understand communication not only as the transport of bits but also as their storage, processing, and relation. In these systems, every network node has transport storage and computing resources that the network operator and its users can exploit through virtualisation and softwarisation of the resources. It is within this context that this work presents its results. We proposed distributed coded approaches to improve communication systems. Our results improve the reliability and latency performance of the transport of information. They also increase the reliability, flexibility, and throughput of storage applications. Furthermore, based on the lessons that coded approaches improve the transport and storage performance of communication systems, we propose a distributed coded approach for the computing of novel in-network applications such as the steering and control of cyber-physical systems. Our proposed approach can increase the reliability and latency performance of distributed in-network computing in the presence of errors, erasures, and attackers