RIScatter: unifying backscatter communication and reconfigurable intelligent surface

Backscatter Communication (BackCom) nodes harvest energy from and modulate information over an external electromagnetic wave. Reconfigurable Intelligent Surface (RIS) adapts its phase shift response to enhance or attenuate channel strength in specific directions. In this paper, we show how those two seemingly different technologies (and their derivatives) can be unified to leverage their benefits simultaneously into a single architecture called RIScatter. RIScatter consists of multiple dispersed or co-located scatter nodes, whose reflection states can be adapted to partially engineer the wireless channel of the existing link and partially modulate their own information onto the scattered wave. This contrasts with BackCom (resp. RIS) where the reflection pattern is exclusively a function of the information symbol (resp. Channel State Information (CSI)). The key principle in RIScatter is to render the probability distribution of reflection states (i.e., backscatter channel input) as a joint function of the information source, CSI, and Quality of Service (QoS) of the coexisting active primary and passive backscatter links. This enables RIScatter to softly bridge, generalize, and outperform BackCom and RIS; boil down to either under specific input distribution; or evolve in a mixed form for heterogeneous traffic control and universal hardware design. For a single-user multi-node RIScatter network, we characterize the achievable primary-(total-)backscatter rate region by optimizing the input distribution at the nodes, the active beamforming at the Access Point (AP), and the backscatter detection regions at the user. Simulation results demonstrate RIScatter nodes can exploit the additional propagation paths to smoothly transition between backscatter modulation and passive beamforming

Energy autonomous systems : future trends in devices, technology, and systems

The rapid evolution of electronic devices since the beginning of the nanoelectronics era has brought about exceptional computational power in an ever shrinking system footprint. This has enabled among others the wealth of nomadic battery powered wireless systems (smart phones, mp3 players, GPS, …) that society currently enjoys. Emerging integration technologies enabling even smaller volumes and the associated increased functional density may bring about a new revolution in systems targeting wearable healthcare, wellness, lifestyle and industrial monitoring applications

Design and Development of Smart Brain-Machine-Brain Interface (SBMIBI) for Deep Brain Stimulation and Other Biomedical Applications

Machine collaboration with the biological body/brain by sending electrical information back and forth is one of the leading research areas in neuro-engineering during the twenty-first century. Hence, Brain-Machine-Brain Interface (BMBI) is a powerful tool for achieving such machine-brain/body collaboration. BMBI generally is a smart device (usually invasive) that can record, store, and analyze neural activities, and generate corresponding responses in the form of electrical pulses to stimulate specific brain regions. The Smart Brain-Machine-Brain-Interface (SBMBI) is a step forward with compared to the traditional BMBI by including smart functions, such as in-electrode local computing capabilities, and availability of cloud connectivity in the system to take the advantage of powerful cloud computation in decision making. In this dissertation work, we designed and developed an innovative form of Smart Brain-Machine-Brain Interface (SBMBI) and studied its feasibility in different biomedical applications. With respect to power management, the SBMBI is a semi-passive platform. The communication module is fully passive—powered by RF harvested energy; whereas, the signal processing core is battery-assisted. The efficiency of the implemented RF energy harvester was measured to be 0.005%. One of potential applications of SBMBI is to configure a Smart Deep-Brain-Stimulator (SDBS) based on the general SBMBI platform. The SDBS consists of brain-implantable smart electrodes and a wireless-connected external controller. The SDBS electrodes operate as completely autonomous electronic implants that are capable of sensing and recording neural activities in real time, performing local processing, and generating arbitrary waveforms for neuro-stimulation. A bidirectional, secure, fully-passive wireless communication backbone was designed and integrated into this smart electrode to maintain contact between the smart electrodes and the controller. The standard EPC-Global protocol has been modified and adopted as the communication protocol in this design. The proposed SDBS, by using a SBMBI platform, was demonstrated and tested through a hardware prototype. Additionally the SBMBI was employed to develop a low-power wireless ECG data acquisition device. This device captures cardiac pulses through a non-invasive magnetic resonance electrode, processes the signal and sends it to the backend computer through the SBMBI interface. Analysis was performed to verify the integrity of received ECG data

Sophisticated Batteryless Sensing

Wireless embedded sensing systems have revolutionized scientific, industrial, and consumer applications. Sensors have become a fixture in our daily lives, as well as the scientific and industrial communities by allowing continuous monitoring of people, wildlife, plants, buildings, roads and highways, pipelines, and countless other objects. Recently a new vision for sensing has emerged---known as the Internet-of-Things (IoT)---where trillions of devices invisibly sense, coordinate, and communicate to support our life and well being. However, the sheer scale of the IoT has presented serious problems for current sensing technologies---mainly, the unsustainable maintenance, ecological, and economic costs of recycling or disposing of trillions of batteries. This energy storage bottleneck has prevented massive deployments of tiny sensing devices at the edge of the IoT. This dissertation explores an alternative---leave the batteries behind, and harvest the energy required for sensing tasks from the environment the device is embedded in. These sensors can be made cheaper, smaller, and will last decades longer than their battery powered counterparts, making them a perfect fit for the requirements of the IoT. These sensors can be deployed where battery powered sensors cannot---embedded in concrete, shot into space, or even implanted in animals and people. However, these batteryless sensors may lose power at any point, with no warning, for unpredictable lengths of time. Programming, profiling, debugging, and building applications with these devices pose significant challenges. First, batteryless devices operate in unpredictable environments, where voltages vary and power failures can occur at any time---often devices are in failure for hours. Second, a device\u27s behavior effects the amount of energy they can harvest---meaning small changes in tasks can drastically change harvester efficiency. Third, the programming interfaces of batteryless devices are ill-defined and non- intuitive; most developers have trouble anticipating the problems inherent with an intermittent power supply. Finally, the lack of community, and a standard usable hardware platform have reduced the resources and prototyping ability of the developer. In this dissertation we present solutions to these challenges in the form of a tool for repeatable and realistic experimentation called Ekho, a reconfigurable hardware platform named Flicker, and a language and runtime for timely execution of intermittent programs called Mayfly

Robust Sum-Rate Maximization in Transmissive RMS Transceiver-Enabled SWIPT Networks

In this paper, we propose a state-of-the-art downlink communication transceiver design for transmissive reconfigurable metasurface (RMS)-enabled simultaneous wireless information and power transfer (SWIPT) networks. Specifically, a feed antenna is deployed in the transmissive RMS-based transceiver, which can be used to implement beamforming. According to the relationship between wavelength and propagation distance, the spatial propagation models of plane and spherical waves are built. Then, in the case of imperfect channel state information (CSI), we formulate a robust system sum-rate maximization problem that jointly optimizes RMS transmissive coefficient, transmit power allocation, and power splitting ratio design while taking account of the non-linear energy harvesting model and outage probability criterion. Since the coupling of optimization variables, the whole optimization problem is non-convex and cannot be solved directly. Therefore, the alternating optimization (AO) framework is implemented to decompose the non-convex original problem. In detail, the whole problem is divided into three sub-problems to solve. For the non-convexity of the objective function, successive convex approximation (SCA) is used to transform it, and penalty function method and difference-of-convex (DC) programming are applied to deal with the non-convex constraints. Finally, we alternately solve the three sub-problems until the entire optimization problem converges. Numerical results show that our proposed algorithm has convergence and better performance than other benchmark algorithms

A composite approach to self-sustainable transmissions : rethinking OFDM

This paper proposes two novel strategies to extend the battery life of an orthogonal frequency division multiplexing (OFDM) receiver, by exploiting the concept of wireless power transfer (WPT). First a new receiver architecture is devised that does not discard the cyclic prefix (CP), but instead, exploits it to extract power from the received signal, realizing a WPT between the transmitter and the receiver. Subsequently, a flexible composite transmit strategy is designed, in which the OFDM transmitter transmits to the receiver two independent signals coexisting in the same band. It is shown that, by means of this approach, the transmitter can arbitrarily increase the power concentrated within the CP at the OFDM receiver, without increasing the redundancy of the transmission. The feasibility conditions for the self-sustainability of the transmission are derived, in terms of power consumption at the receiver, for both legacy and composite transmission. Numerical findings show that, under reasonable conditions, the amount of power carried in the CP could be made sufficient to decode the information symbols, making the transmission fully self-sustainable. The potential of the proposed approach is confirmed by the encouraging results obtained when the full self-sustainability constraint is relaxed, and partially self-sustainable OFDM transmissions are analyzed

Energy Harvesting Systems for the Internet of Things with Applications to Smart Agriculture

The Internet of Things is the interconnection of everyday objects to the web, with the purpose of exchanging information to enable smarter actions and potentially make a process more efficient. However, how power is provided and stored in remote sensing applications is still one of the main modern electronics challenges of such technology and can become one of the main constraints to prevent its mass adoption. Energy Harvesting is an emerging technology that can transform energy in the environment into usable energy, among such environmental energy are electromagnetic waves, thermal, solar, kinesthetic transducers, fuel cells, to name a few. Because this technology makes use of the available ambient energy, it has the potential to increase the power readiness for battery-operated electronics and more importantly, it can become the technology that fully powers the next generation of internet-enabled agricultural solutions. This dissertation centers around the design and development of high-efficient power management systems for AC and DC energy harvesting sources. The proposed architectures not only consider circuits, systems and algorithms that make a more efficient power extraction but also focuses on providing inherent sensing functionalities at no extra system complexity, which in turn not only achieves the goal of extending the battery life of proposed smart sensor applications but also proposes new charge extraction methods to permanently power an electronic device. The work presented in this dissertation demonstrates that energy harvesting, and internet of things devices can be implemented in multiple smart agriculture scenarios by proposing algorithms, circuits and systems capable of performing energy harvesting operations while providing reliable data to the end user. The analysis of the design of such proof-of-concept prototypes are provided in this dissertation along with its implementation and testing. The first part of this dissertation proposes novel algorithms for maximum power extraction and new power measurement techniques. The second part focuses on front-end circuits for AC energy harvesting sources and circuits that can provide sensing capabilities along with energy harvesting operations