Impact of Ear Occlusion on In-Ear Sounds Generated by Intra-oral Behaviors

We conducted a case study with one volunteer and a recording setup to detect sounds induced by the actions: jaw clenching, tooth grinding, reading, eating, and drinking. The setup consisted of two in-ear microphones, where the left ear was semi-occluded with a commercially available earpiece and the right ear was occluded with a mouldable silicon ear piece. Investigations in the time and frequency domains demonstrated that for behaviors such as eating, tooth grinding, and reading, sounds could be recorded with both sensors. For jaw clenching, however, occluding the ear with a mouldable piece was necessary to enable its detection. This can be attributed to the fact that the mouldable ear piece sealed the ear canal and isolated it from the environment, resulting in a detectable change in pressure. In conclusion, our work suggests that detecting behaviors such as eating, grinding, reading with a semi-occluded ear is possible, whereas, behaviors such as clenching require the complete occlusion of the ear if the activity should be easily detectable. Nevertheless, the latter approach may limit real-world applicability because it hinders the hearing capabilities.</p

serial and parallel robotics: energy saving systems and rehabilitation devices

This thesis focuses on the design and discussion of robotic devices and their applications. Robotics is the branch of technology that deals with the design, construction, operation, and application of robots as well as computer systems for their control, sensory feedback, and information processing [1]. Nowadays, robotics has been an unprecedented increase in applications of industry, military, health, domestic service, exploration, commerce, etc. Different applications require robots with different structures and different functions. Robotics normally includes serial and parallel structures. To have contribution to two kinds of structures, this thesis consisting of two sections is devoted to the design and development of serial and parallel robotic structures, focused on applications in the two different fields: industry and health

Injury and Skeletal Biomechanics

This book covers many aspects of Injury and Skeletal Biomechanics. As the title represents, the aspects of force, motion, kinetics, kinematics, deformation, stress and strain are examined in a range of topics such as human muscles and skeleton, gait, injury and risk assessment under given situations. Topics range from image processing to articular cartilage biomechanical behavior, gait behavior under different scenarios, and training, to musculoskeletal and injury biomechanics modeling and risk assessment to motion preservation. This book, together with "Human Musculoskeletal Biomechanics", is available for free download to students and instructors who may find it suitable to develop new graduate level courses and undergraduate teaching in biomechanics

Design and modelling of a compliant ankle rehabilitation robot redundantly driven by pneumatic muscles

Ankle sprains are the most common type of ankle injuries for the general public. Due to the lack of human manual therapy resources, it is highly demanding for robot-assisted rehabilitation training. However, most of the current robotic ankle rehab devices are driven by rigid actuators and have problems such as limited degrees of freedom, lack of safety and compliance and poor flexibility. This paper will design a new version of compliant ankle rehabilitation robot redundantly driven by pneumatic muscles (PMs) to provide full range of motion and torque ability for human ankle with enhanced safety and adaptability, attributing to the PM's high power/mass ratio, good flexibility and light weight advantages. In this paper, the driving characteristics of the PM actuators, as well as the kinematics and rehabilitation requirements of the ankle joint are analyzed. A new type of ankle rehabilitation robot that is redundantly driven by five PMs is designed and modeled. The ankle joint can be compliantly driven by the robot with full three degrees of freedom to perform dorsiflexion/plantarflexion, inversion/ eversion and adduction/abduction training. Then the kinematics and dynamics model of the rehabilitation robot is established to validate and verify the design and the models

Advances of Italian Machine Design

This 2028 Special Issue presents recent developments and achievements in the field of Mechanism and Machine Science coming from the Italian community with international collaborations and ranging from theoretical contributions to experimental and practical applications. It contains selected contributions that were accepted for presentation at the Second International Conference of IFToMM Italy, IFIT2018, that has been held in Cassino on 29 and 30 November 2018. This IFIT conference is the second event of a series that was established in 2016 by IFToMM Italy in Vicenza. IFIT was established to bring together researchers, industry professionals and students, from the Italian and the international community in an intimate, collegial and stimulating environment

Computational Intelligence in Electromyography Analysis

Electromyography (EMG) is a technique for evaluating and recording the electrical activity produced by skeletal muscles. EMG may be used clinically for the diagnosis of neuromuscular problems and for assessing biomechanical and motor control deficits and other functional disorders. Furthermore, it can be used as a control signal for interfacing with orthotic and/or prosthetic devices or other rehabilitation assists. This book presents an updated overview of signal processing applications and recent developments in EMG from a number of diverse aspects and various applications in clinical and experimental research. It will provide readers with a detailed introduction to EMG signal processing techniques and applications, while presenting several new results and explanation of existing algorithms. This book is organized into 18 chapters, covering the current theoretical and practical approaches of EMG research

Smart Robotic Exoskeleton: Constructing Using 3D Printer Technique for Ankle-Foot Rehabilitation

Patients with spinal cord injury (SCI), stroke, and coronavirus patients must undergo a rehabilitation process involving programmed exercises to regain their ability to perform activities of daily living (ADL). This study focuses on the rehabilitation of the foot-ankle joint to restore ADL through the design and implementation of a rehabilitation exoskeleton with three degrees of freedom (abduction/adduction, inversion/eversion, and plantarflexion/dorsiflexion movements). increase the patients cause worker fatigue, emotional exhaustion, a lack of motivation, and feelings of frustration, all contributing to a decrease in work efficacy and productivity. The robotic exoskeleton was developed to overcome this limitation and support the medical rehabilitation section.   The main goal of this study is to develop a portable exoskeleton that is comfortable, lightweight, and has a range of motion (ROM) compatible with human anatomy to ensure that movements outside of this range are minimized, the anthropometric parameters of a typical human lower foot have been considered. In addition, it's a home-based rehabilitation device which means the exoskeleton can be used in any environment due to its lightweight and small size to accelerate the rehabilitation process and increase patient comfort.  The proposed autonomous exoskeleton structure is designed in Solid Works and constructed with polylactic acid (PLA) plastic, the reason PLA was chosen is its lightweight, available, stiff material, and low cost, using 3D printing technology the exoskeleton was manufacturing. Electromyography (EMG) and angle data were extracted using EMG MyoWare and gyroscope sensors, respectively, to control the exoskeleton. It was evaluated on its own then with 2 normal subjects and 17 patients with stroke, spinal cord injury (SCI), and coronavirus. The limitation that has been faced was that the sessions were limited due to the limited time provided for the study. According to the improvement rate, the exoskeleton has a significant impact on regaining muscle activity and improving the range of motion of foot-ankle joints for the three types of patients. The rate of improvement was 300%, 94%, and 133.3% for coronavirus, SCI, and stoke respectively. These results demonstrate that this exoskeleton can be utilized for physiotherapy exercises

The 3rd International Conference on the Challenges, Opportunities, Innovations and Applications in Electronic Textiles

This reprint is a collection of papers from the E-Textiles 2021 Conference and represents the state-of-the-art from both academia and industry in the development of smart fabrics that incorporate electronic and sensing functionality. The reprint presents a wide range of applications of the technology including wearable textile devices for healthcare applications such as respiratory monitoring and functional electrical stimulation. Manufacturing approaches include printed smart materials, knitted e-textiles and flexible electronic circuit assembly within fabrics and garments. E-textile sustainability, a key future requirement for the technology, is also considered. Supplying power is a constant challenge for all wireless wearable technologies and the collection includes papers on triboelectric energy harvesting and textile-based water-activated batteries. Finally, the application of textiles antennas in both sensing and 5G wireless communications is demonstrated, where different antenna designs and their response to stimuli are presented