Modular Multi-level Converter Hardware-in-the-Loop Simulation on low-cost System-on-Chip devices

Comunicació presentada a IECON 2018 - 44th Annual Conference of the IEEE Industrial Electronics Society (October 21-23, 2018 Washington D.C., USA.)System-on-Chip (SoC) devices combine powerful general purpose processors, a Field-Programmable Gate Array (FPGA) and other peripherals which make them very convenient for Hardware-in-the-Loop (HIL) simulation. One of the limitations of these devices is that control engineers are not particularly familiarized with FPGA programming, which need extensive expertise in order to code these highly sophisticated algorithms using Hardware Description Languages (HDL). Notwithstanding, there exist High-Level Synthesis (HLS) tools which allow to program these devices using more generic programming languages such as C, C++ and SystemC. This paper evaluates SoC devices to implement a Modular Multi-Level Converter (MMC) model using HLS tools for being implemented in the FPGA fabric in order to perform HIL verification of control algorithms in a single low-cost device

Multi-rate real-time simulation of modular multilevel converter using CPU and FPGA

This thesis presents the real-time simulation of a modular multilevel converter (MMC) using Field Programmable Gates Array (FPGA). Undertaking such a project raises challenges due to the very high number of components in MMC. The choice of the hardware used is justified by this particular problematic. Using FPGA, a very large number of inputs and outputs can be easily managed. By simulating the converter on FPGA reduces latency and the delays between the IOs and the MMC. It also allows using very small time-step ensuring accuracy for pulses detection. Only the converter is simulated on FPGA and the remaining component of the simulation, such as the AC system and its distribution network are simulated on CPU. Doing so gives the user access to large library of component from commercial software. Using two distinct platforms, CPU and FPGA, then requires the model not only to be decoupled, but also to use different sampling time. This thesis debuts by a presentation of the problematic. Then, the required sampling time for accurate simulation of MMC is demonstrated. In order to achieve such a small time-step, a decoupling method and its validation is proposed. The method is then generalized and applied to multi-rate simulation. Using those methods, a details implementation of the converter, using OPAL-RT technologies real-time simulator, is given. Finally, numerical and experimental validation of this model are presented

Modeling and enhanced control of hybrid full bridge–half bridge MMCs for HVDC grid studies

Modular multilevel converters (MMCs) are expected to play an important role in future high voltage direct current (HVDC) grids. Moreover, advanced MMC topologies may include various submodule (SM) types. In this sense, the modeling of MMCs is paramount for HVDC grid studies. Detailed models of MMCs are cumbersome for electromagnetic transient (EMT) programs due to the high number of components and large simulation times. For this reason, simplified models that reduce the computation times while reproducing the dynamics of the MMCs are needed. However, up to now, the models already developed do not consider hybrid MMCs, which consist of different types of SMs. In this paper, a procedure to simulate MMCs having different SM topologies is proposed. First, the structure of hybrid MMCs and the modeling method is presented. Next, an enhanced procedure to compute the number of SMs to be inserted that takes into account the different behavior of full-bridge SMs (FB-SMs) and half-bridge submodules (HB-SMs) is proposed in order to improve the steady-state and dynamic response of hybrid MMCs. Finally, the MMC model and its control are validated by means of detailed PSCAD simulations for both steady-state and transients conditions (AC and DC faults)

Modular Multilevel Cascaded Flying Capacitor STATCOM for Balanced and Unbalanced Load Compensation

Voltage and current unbalance are major problems in distribution networks, particularly with the integration of distributed generation systems. One way of mitigating these issues is by injecting negative sequence current into the distribution network using a Static Synchronous Compensator (STATCOM) which normally also regulates the voltage and power factor. The benefits of modularity and scalability offered by Modular Multilevel Cascaded Converters (MMCC) make them suitable for STATCOM application. A number of different types of MMCC may be used, classified according to the sub-module circuit topology used. Their performance features and operational ranges for unbalanced load compensation are evaluated and quantified in this research. This thesis investigates the use of both single star and single delta configured five-level Flying Capacitor (FC) converter MMCC based STATCOMs for unbalanced load compensation. A detailed study is carried out to compare this type of sub-module with several other types namely: half bridge, 3-L H-bridge and 3-L FC half bridge, and reveals the one best suited to STATCOM operation. With the choice of 5-L FC H-bridge as the sub-module for STATCOM operation, a detailed investigation is also performed to decide which pulse width modulation technique is the best. This was based on the assessment of total harmonic distortion, power loss, sub-module switch utilization and natural balancing of inner flying capacitors. Two new modulation techniques of swapped-carrier PWM (SC-PWM) along with phase disposed and phase shifted PWM (PS-PWM) are analyzed under these four performance metrics. A novel contribution of this research is the development of a new space vector modulation technique using an overlapping hexagon technique. This space vector strategy offers benefits of eliminating control complexity and improving waveform quality, unlike the case of multilevel space vector technique. The simulation and experimental results show that this method provides superior performance and is applicable for other MMCC sub-modules. Another contribution is the analysis and quantification of operating ranges of both single star and delta MMCCs in rating the cluster dc-link voltage (star) and current (delta) for unbalanced load compensation. A novel method of extending the operating capabilities of both configurations uses a third harmonic injection method. An experimental investigation validates the operating range extension compared to the pure sinusoidal zero sequence voltage and current injection. Also, the superiority of the single delta configured MMCC for unbalanced loading compensation is validated

VERILOG DESIGN AND FPGA PROTOTYPE OF A NANOCONTROLLER SYSTEM

Many new fabrication technologies, from nanotechnology and MEMS to printed organic semiconductors, center on constructing arrays of large numbers of sensors, actuators, or other devices on a single substrate. The utility of such an array could be greatly enhanced if each device could be managed by a programmable controller and all of these controllers could coordinate their actions as a massively-parallel computer. Kentucky Architecture nanocontroller array with very low per controller circuit complexity can provide efficient control of nanotechnology devices. This thesis provides a detailed description of the control hierarchy of a digital system needed to build nanocontrollers suitable for controlling millions of devices on a single chip. A Verilog design and FPGA prototype of a nanocontroller system is provided to meet the constraints associated with a massively-parallel programmable controller system

Industrial and Technological Applications of Power Electronics Systems

The Special Issue "Industrial and Technological Applications of Power Electronics Systems" focuses on: - new strategies of control for electric machines, including sensorless control and fault diagnosis; - existing and emerging industrial applications of GaN and SiC-based converters; - modern methods for electromagnetic compatibility. The book covers topics such as control systems, fault diagnosis, converters, inverters, and electromagnetic interference in power electronics systems. The Special Issue includes 19 scientific papers by industry experts and worldwide professors in the area of electrical engineering

Design and Control of Power Converters 2019

In this book, 20 papers focused on different fields of power electronics are gathered. Approximately half of the papers are focused on different control issues and techniques, ranging from the computer-aided design of digital compensators to more specific approaches such as fuzzy or sliding control techniques. The rest of the papers are focused on the design of novel topologies. The fields in which these controls and topologies are applied are varied: MMCs, photovoltaic systems, supercapacitors and traction systems, LEDs, wireless power transfer, etc