Real-time Simulation of Dynamic Vehicle Models using a High-performance Reconfigurable Platform

A purely software-based approach for Real-Time Simulation (RTS) may have difficulties in meeting real-time constraints for complex physical model simulations. In this paper, we present a methodology for the design and im-plementationofRTS algorithms,basedontheuseof Field-ProgrammableGateArray(FPGA) technologytoimprove the response time of these models. Our methodology utilizes traditional hardware/software co-design approaches to generate a heterogeneous architecture for an FPGA-based simulator. The hardware design was optimized such that it efficiently utilizes the parallel nature of FPGAs and pipelines the independent operations. Further enhancement is obtained through the use of custom accelerators for common non-linear functions. Since the systems we examined had relatively low response time requirements, our approach greatly simplifies the software components by porting the computationally complexregionsto hardware.We illustratethe partitioningofa hardware-based simulator design across dual FPGAs, initiateRTS usinga system input froma Hardware-in-the-Loop (HIL) framework, and use these simulation results from our FPGA-based platform to perform response analysis. The total simulation time, which includes the time required to receive the system input over a socket (without HIL), software initialization, hardware computation, and transferof simulation results backovera socket, showsa speedup of 2× as compared to a simi-lar setup with no hardware acceleration. The correctness of the simulation output from the hardware has also been validated with the simulated results from the software-only design

Special Session on Industry 4.0

No abstract available

NASA Automated Rendezvous and Capture Review. Executive summary

In support of the Cargo Transfer Vehicle (CTV) Definition Studies in FY-92, the Advanced Program Development division of the Office of Space Flight at NASA Headquarters conducted an evaluation and review of the United States capabilities and state-of-the-art in Automated Rendezvous and Capture (AR&C). This review was held in Williamsburg, Virginia on 19-21 Nov. 1991 and included over 120 attendees from U.S. government organizations, industries, and universities. One hundred abstracts were submitted to the organizing committee for consideration. Forty-two were selected for presentation. The review was structured to include five technical sessions. Forty-two papers addressed topics in the five categories below: (1) hardware systems and components; (2) software systems; (3) integrated systems; (4) operations; and (5) supporting infrastructure

A High Performance Fuzzy Logic Architecture for UAV Decision Making

The majority of Unmanned Aerial Vehicles (UAVs) in operation today are not truly autonomous, but are instead reliant on a remote human pilot. A high degree of autonomy can provide many advantages in terms of cost, operational resources and safety. However, one of the challenges involved in achieving autonomy is that of replicating the reasoning and decision making capabilities of a human pilot. One candidate method for providing this decision making capability is fuzzy logic. In this role, the fuzzy system must satisfy real-time constraints, process large quantities of data and relate to large knowledge bases. Consequently, there is a need for a generic, high performance fuzzy computation platform for UAV applications. Based on Lees’ [1] original work, a high performance fuzzy processing architecture, implemented in Field Programmable Gate Arrays (FPGAs), has been developed and is shown to outclass the performance of existing fuzzy processors

High performance control of a multiple-DOF motion platform for driver seat vibration test in laboratory

Dynamic testing plays an important part in the vehicle seat suspension study. However, a large amount of research work on vibration control of vehicle seat suspension to date has been limited to simulations because the use of a full-size vehicle to test the device is an expensive and dangerous task. In order to decrease the product development time and cost as well as to improve the design quality, in this research, a vibration generation platform is developed for simulating the road induced vehicle vibration in laboratory. Different from existing driving simulation platforms, this research focuses on the vehicle chassis vibration simulation and the control of motion platform to make sure the platform can more accurately generate the actual vehicle vibration movement. A seven degree-of-freedom (DOF) full-vehicle model with varying road inputs is used to simulate the real vehicle vibration. Moreover, because the output vibration data of the vehicle model is all about the absolute heave, pitch and roll velocities of the sprung mass, in order to simulate the vibration in all dimensions, a Stewart multiple-DOF motion platform is designed to generate the required vibration. As a result, the whole vibration simulator becomes a hardware-in-the-loop (HIL) system. The hardware consists of a computer used to calculate the required vibration signals, a Stewart platform used to generate the real movement, and a controller used to control the movement of the platform and implemented by a National Instruments (NI) CompactRIO board. The data, which is from the vehicle model, can be converted into the length of the six legs of the Stewart platform. Therefore, the platform can transfer into the same posture as the real vehicle chassis at that moment. The success of the developed platform is demonstrated by HIL experiments of actuators. As there are six actuators installed in the motion platform, the signals from six encoders are used as the feedback signals for the control of the length of the actuators, and advanced control strategies are developed to control the movement of the platform to make sure the platform can accurately generate the required motion even in heavy load situations. Theoretical study is conducted on how to generate the reasonable vibration signals suitable for vehicle seat vibration tests in different situations and how to develop advanced control strategies for accurate control of the motion platform. Both simulation and experimental studies are conducted to validate the proposed approaches

Resource-Aware Predictive Models in Cyber-Physical Systems

Cyber-Physical Systems (CPS) are composed of computing devices interacting with physical systems. Model-based design is a powerful methodology in CPS design in the implementation of control systems. For instance, Model Predictive Control (MPC) is typically implemented in CPS applications, e.g., in path tracking of autonomous vehicles. MPC deploys a model to estimate the behavior of the physical system at future time instants for a specific time horizon. Ordinary Differential Equations (ODE) are the most commonly used models to emulate the behavior of continuous-time (non-)linear dynamical systems. A complex physical model may comprise thousands of ODEs that pose scalability, performance and power consumption challenges. One approach to address these model complexity challenges are frameworks that automate the development of model-to-model transformation. In this dissertation, a state-based model with tunable parameters is proposed to operate as a reconfigurable predictive model of the physical system. Moreover, we propose a run-time switching algorithm that selects the best model using machine learning. We employed a metric that formulates the trade-off between the error and computational savings due to model reduction. Building statistical models are constrained to having expert knowledge and an actual understanding of the modeled phenomenon or process. Also, statistical models may not produce solutions that are as robust in a real-world context as factors outside the model, like disruptions would not be taken into account. Machine learning models have emerged as a solution to account for the dynamic behavior of the environment and automate intelligence acquisition and refinement. Neural networks are machine learning models, well-known to have the ability to learn linear and nonlinear relations between input and output variables without prior knowledge. However, the ability to efficiently exploit resource-hungry neural networks in embedded resource-bound settings is a major challenge.Here, we proposed Priority Neuron Network (PNN), a resource-aware neural networks model that can be reconfigured into smaller sub-networks at runtime. This approach enables a trade-off between the model's computation time and accuracy based on available resources. The PNN model is memory efficient since it stores only one set of parameters to account for various sub-network sizes. We propose a training algorithm that applies regularization techniques to constrain the activation value of neurons and assigns a priority to each one. We consider the neuron's ordinal number as our priority criteria in that the priority of the neuron is inversely proportional to its ordinal number in the layer. This imposes a relatively sorted order on the activation values. We conduct experiments to employ our PNN as the predictive model in a CPS application. We can see that not only our technique will resolve the memory overhead of DNN architectures but it also reduces the computation overhead for the training process substantially. The training time is a critical matter especially in embedded systems where many NN models are trained on the fly