Secure Vehicular Communication Systems: Implementation, Performance, and Research Challenges

Vehicular Communication (VC) systems are on the verge of practical deployment. Nonetheless, their security and privacy protection is one of the problems that have been addressed only recently. In order to show the feasibility of secure VC, certain implementations are required. In [1] we discuss the design of a VC security system that has emerged as a result of the European SeVeCom project. In this second paper, we discuss various issues related to the implementation and deployment aspects of secure VC systems. Moreover, we provide an outlook on open security research issues that will arise as VC systems develop from today's simple prototypes to full-fledged systems

A Framework for Dynamic Traffic Monitoring Using Vehicular Ad-Hoc Networks

Traffic management centers (TMCs) need high-quality data regarding the status of roadways for monitoring and delivering up-to-date traffic conditions to the traveling public. Currently this data is measured at static points on the roadway using technologies that have significant maintenance requirements. To obtain an accurate picture of traffic on any road section at any time requires a real-time probe of vehicles traveling in that section. We envision a near-term future where network communication devices are commonly included in new vehicles. These devices will allow vehicles to form vehicular networks allowing communication among themselves, other vehicles, and roadside units (RSUs) to improve driver safety, provide enhanced monitoring to TMCs, and deliver real-time traffic conditions to drivers. In this dissertation, we contribute and develop a framework for dynamic trafficmonitoring (DTMon) using vehicular networks. We introduce RSUs called task organizers (TOs) that can communicate with equipped vehicles and with a TMC. These TOs can be programmed by the TMC to task vehicles with performing traffic measurements over various sections of the roadway. Measurement points for TOs, or virtual strips, can be changed dynamically, placed anywhere within several kilometers of the TO, and used to measure wide areas of the roadway network. This is a vast improvement over current technology. We analyze the ability of a TO, or multiple TOs, to monitor high-quality traffic datain various traffic conditions (e.g., free flow traffic, transient flow traffic, traffic with congestion, etc.). We show that DTMon can accurately monitor speed and travel times in both free-flow and traffic with transient congestion. For some types of data, the percentage of equipped vehicles, or the market penetration rate, affects the quality of data gathered. Thus, we investigate methods for mitigating the effects of low penetration rate as well as low traffic density on data quality using DTMon. This includes studying the deployment of multiple TOs in a region and the use of oncoming traffic to help bridge gaps in connectivity. We show that DTMon can have a large impact on traffic monitoring. Traffic engineers can take advantage of the programmability of TOs, giving them the ability to measure traffic at any point within several km of a TO. Most real-time traffic maps measure traffic at midpoint of roads between interchanges and the use of this framework would allow for virtual strips to be placed at various locations in between interchanges, providing fine-grained measurements to TMCs. In addition, the measurement points can be adjusted as traffic conditions change. An important application of this is end-of-queue management. Traffic engineers are very interested in deliver timely information to drivers approaching congestion endpoints to improve safety. We show the ability of DTMon in detecting the end of the queue during congestion

A Feasibility Study on Embedded Micro-Electromechanical Sensors and Systems (MEMS) for Monitoring Highway Structures

Micro-electromechanical systems (MEMS) provide vast improvements over existing sensing methods in the context of structural health monitoring (SHM) of highway infrastructure systems, including improved system reliability, improved longevity and enhanced system performance, improved safety against natural hazards and vibrations, and a reduction in life cycle cost in both operating and maintaining the infrastructure. Advancements in MEMS technology and wireless sensor networks provide opportunities for long-term, continuous, real-time structural health monitoring of pavements and bridges at low cost within the context of sustainable infrastructure systems. The primary objective of this research was to investigate the use of MEMS in highway structures for health monitoring purposes. This study focused on investigating the use of MEMS and their potential applications in concrete through a comprehensive literature review, a vendor survey, and a laboratory study, as well as a small-scale field study. Based on the comprehensive literature review and vendor survey, the latest information available on off-the-shelf MEMS devices, as well as research prototypes, for bridge, pavement, and traffic applications were synthesized. A commercially-available wireless concrete monitoring system based on radio-frequency identification (RFID) technology and off-the-shelf temperature and humidity sensors were tested under controlled laboratory and field conditions. The test results validated the ability of the RFID wireless concrete monitoring system in accurately measuring the temperature both inside the laboratory and in the field under severe weather conditions. In consultation with the project technical advisory committee (TAC), the most relevant MEMS-based transportation infrastructure research applications to explore in the future were also highlighted and summarized

Assessing dynamic models for high priority waste collection in smart cities

Waste Management (WM) represents an important part of Smart Cities (SCs) with significant impact on modern societies. WM involves a set of processes ranging from waste collection to the recycling of the collected materials. The proliferation of sensors and actuators enable the new era of Internet of Things (IoT) that can be adopted in SCs and help in WM. Novel approaches that involve dynamic routing models combined with the IoT capabilities could provide solutions that outperform existing models. In this paper, we focus on a SC where a number of collection bins are located in different areas with sensors attached to them. We study a dynamic waste collection architecture, which is based on data retrieved by sensors. We pay special attention to the possibility of immediate WM service in high priority areas, e.g., schools or hospitals where, possibly, the presence of dangerous waste or the negative effects on human quality of living impose the need for immediate collection. This is very crucial when we focus on sensitive groups of citizens like pupils, elderly or people living close to areas where dangerous waste is rejected. We propose novel algorithms aiming at providing efficient and scalable solutions to the dynamic waste collection problem through the management of the trade-off between the immediate collection and its cost. We describe how the proposed system effectively responds to the demand as realized by sensor observations and alerts originated in high priority areas. Our aim is to minimize the time required for serving high priority areas while keeping the average expected performance at high level. Comprehensive simulations on top of the data retrieved by a SC validate the proposed algorithms on both quantitative and qualitative criteria which are adopted to analyze their strengths and weaknesses. We claim that, local authorities could choose the model that best matches their needs and resources of each city