Real-time complexity constrained encoding

Complex software appliances can be deployed on hardware with limited available computational resources. This computational boundary puts an additional constraint on software applications. This can be an issue for real-time applications with a fixed time constraint such as low delay video encoding. In the context of High Efficiency Video Coding (HEVC), a limited number of publications have focused on controlling the complexity of an HEVC video encoder. In this paper, a technique is proposed to control complexity by deciding between 2Nx2N merge mode and full encoding, at different Coding Unit (CU) depths. The technique is demonstrated in two encoders. The results demonstrate fast convergence to a given complexity threshold, and a limited loss in rate-distortion performance (on average 2.84% Bjontegaard delta rate for 40% complexity reduction)

An Efficient Mode Decision Algorithm Based on Dynamic Grouping and Adaptive Adjustment for H.264/AVC

“This material is presented to ensure timely dissemination of scholarly and technical work. Copyright and all rights therein are retained by authors or by other copyright holders. All persons copying this information are expected to adhere to the terms and constraints invoked by each author's copyright. In most cases, these works may not be reposted without the explicit permission of the copyright holder." “Copyright IEEE. Personal use of this material is permitted. However, permission to reprint/republish this material for advertising or promotional purposes or for creating new collective works for resale or redistribution to servers or lists, or to reuse any copyrighted component of this work in other works must be obtained from the IEEE.”The rate distortion optimization (RDO) enabled mode decision (MD) is one of the most important techniques introduced by H.264/AVC. By adopting the exhaustive calculation of rate distortion, the optimal MD enhances the video encoding quality. However, the computational complexity is significantly increased, which is a key challenge for real-time and low power consumption applications. This paper presents a new fast MD algorithm for highly efficient H.264/AVC encoder. The proposed algorithm employs a dynamic group of candidate inter/intra modes to reduce the computational cost. In order to minimize the performance loss incurred by improper mode selection for the previously encoded frames, an adaptive adjustment scheme based on the undulation of bitrate and PSNR is suggested. Experimental results show that the proposed algorithm reduces the encoding time by 35% on average, and the loss of PSNR is usually limited in 0.1 dB with less than 1% increase of bitrate

An efficient fast mode decision algorithm for H.264/AVC intra/inter predictions

H.264/AVC is the newest video coding standard, which outperforms the former standards in video coding efficiency in terms of improved video quality and decreased bitrate. Variable block size based mode decision (MD) with rate distortion optimization (RDO) is one of the most impressive new techniques employed in H.264/AVC. However, the improvement on performance is achieved at the expense of significantly increased computational complexity, which is a key challenge for real-time applications. An efficient fast mode decision algorithm is then proposed in this paper. By exploiting the correlation between macroblocks and the statistical characteristics of sub-macroblock in MD, the video encoding time can be reduced 52.19% on average. Furthermore, the motion speed based adjustment scheme was introduced to minimize the degradation of performanc

Motion estimation and CABAC VLSI co-processors for real-time high-quality H.264/AVC video coding

Real-time and high-quality video coding is gaining a wide interest in the research and industrial community for different applications. H.264/AVC, a recent standard for high performance video coding, can be successfully exploited in several scenarios including digital video broadcasting, high-definition TV and DVD-based systems, which require to sustain up to tens of Mbits/s. To that purpose this paper proposes optimized architectures for H.264/AVC most critical tasks, Motion estimation and context adaptive binary arithmetic coding. Post synthesis results on sub-micron CMOS standard-cells technologies show that the proposed architectures can actually process in real-time 720 × 480 video sequences at 30 frames/s and grant more than 50 Mbits/s. The achieved circuit complexity and power consumption budgets are suitable for their integration in complex VLSI multimedia systems based either on AHB bus centric on-chip communication system or on novel Network-on-Chip (NoC) infrastructures for MPSoC (Multi-Processor System on Chip

Automatic fine-grained area detection for thin client systems

A

Optimizations for real-time implementation of H264/AVC video encoder on DSP processor

International audienceReal-time H.264/AVC high definition video encoding represents a challenging workload to most existing programmable processors. The new technologies of programmable processors such as Graphic Processor Unit (GPU) and multicore Digital signal Processor (DSP) offer a very promising solution to overcome these constraints. In this paper, an optimized implementation of H264/AVC video encoder on a single core among the six cores of TMS320C6472 DSP for Common Intermediate Format (CIF) (352x288) resolution is presented in order to move afterwards to a multicore implementation for standard and high definitions (SD,HD).Algorithmic optimization is applied to the intra prediction module to reduce the computational time. Furthermore, based on the DSP architectural features, various structural and hardware optimizations are adopted to minimize external memory access. The parallelism between CPU processing and data transfers is fully exploited using an Enhanced Direct Memory Access controller (EDMA). Experimental results show that the whole proposed optimizations, on a single core running at 700 MHz for CIF resolution, improve the encoding speed by up to 42.91%. They allow reaching the real-time encoding 25 f/s without inducing any Peak Signal to Noise Ratio (PSNR) degradation or bit-rate increase and make possible to achieve real time implementation for SD and HD resolutions when exploiting multicore features

A parallel H.264/SVC encoder for high definition video conferencing

In this paper we present a video encoder specially developed and configured for high definition (HD) video conferencing. This video encoder brings together the following three requirements: H.264/Scalable Video Coding (SVC), parallel encoding on multicore platforms, and parallel-friendly rate control. With the first requirement, a minimum quality of service to every end-user receiver over Internet Protocol networks is guaranteed. With the second one, real-time execution is accomplished and, for this purpose, slice-level parallelism, for the main encoding loop, and block-level parallelism, for the upsampling and interpolation filtering processes, are combined. With the third one, a proper HD video content delivery under certain bit rate and end-to-end delay constraints is ensured. The experimental results prove that the proposed H.264/SVC video encoder is able to operate in real time over a wide range of target bit rates at the expense of reasonable losses in rate-distortion efficiency due to the frame partitioning into slices