2,852 research outputs found
Modern Methods of Time-Frequency Warping of Sound Signals
Tato práce se zabývá reprezentací nestacionárních harmonických signálů s časově proměnnými komponentami. Primárně je zaměřena na Harmonickou transformaci a jeji variantu se subkvadratickou výpočetní složitostí, Rychlou harmonickou transformaci. V této práci jsou prezentovány dva algoritmy využívající Rychlou harmonickou transformaci. Prvni používá jako metodu odhadu změny základního kmitočtu sbírané logaritmické spektrum a druhá používá metodu analýzy syntézou. Oba algoritmy jsou použity k analýze řečového segmentu pro porovnání vystupů. Nakonec je algoritmus využívající metody analýzy syntézou použit na reálné zvukové signály, aby bylo možné změřit zlepšení reprezentace kmitočtově modulovaných signálů za použití Harmonické transformace.This thesis deals with representation of non-stationary harmonic signals with time-varying components. Its main focus is aimed at Harmonic Transform and its variant with subquadratic computational complexity, the Fast Harmonic Transform. Two algorithms using the Fast Harmonic Transform are presented. The first uses the gathered log-spectrum as fundamental frequency change estimation method, the second uses analysis-by-synthesis approach. Both algorithms are used on a speech segment to compare its output. Further the analysis-by-synthesis algorithm is applied on several real sound signals to measure the increase in the ability to represent real frequency-modulated signals using the Harmonic Transform.
Time and frequency domain algorithms for speech coding
The promise of digital hardware economies (due to recent advances in
VLSI technology), has focussed much attention on more complex and sophisticated
speech coding algorithms which offer improved quality at relatively
low bit rates.
This thesis describes the results (obtained from computer simulations)
of research into various efficient (time and frequency domain) speech
encoders operating at a transmission bit rate of 16 Kbps.
In the time domain, Adaptive Differential Pulse Code Modulation (ADPCM)
systems employing both forward and backward adaptive prediction were
examined. A number of algorithms were proposed and evaluated, including
several variants of the Stochastic Approximation Predictor (SAP). A
Backward Block Adaptive (BBA) predictor was also developed and found to
outperform the conventional stochastic methods, even though its complexity
in terms of signal processing requirements is lower. A simplified
Adaptive Predictive Coder (APC) employing a single tap pitch predictor
considered next provided a slight improvement in performance over ADPCM,
but with rather greater complexity.
The ultimate test of any speech coding system is the perceptual performance
of the received speech. Recent research has indicated that this
may be enhanced by suitable control of the noise spectrum according to
the theory of auditory masking. Various noise shaping ADPCM
configurations were examined, and it was demonstrated that a proposed
pre-/post-filtering arrangement which exploits advantageously the
predictor-quantizer interaction, leads to the best subjective
performance in both forward and backward prediction systems.
Adaptive quantization is instrumental to the performance of ADPCM systems.
Both the forward adaptive quantizer (AQF) and the backward oneword
memory adaptation (AQJ) were examined. In addition, a novel method
of decreasing quantization noise in ADPCM-AQJ coders, which involves the
application of correction to the decoded speech samples, provided
reduced output noise across the spectrum, with considerable high frequency
noise suppression.
More powerful (and inevitably more complex) frequency domain speech
coders such as the Adaptive Transform Coder (ATC) and the Sub-band Coder
(SBC) offer good quality speech at 16 Kbps. To reduce complexity and
coding delay, whilst retaining the advantage of sub-band coding, a novel
transform based split-band coder (TSBC) was developed and found to compare
closely in performance with the SBC.
To prevent the heavy side information requirement associated with a
large number of bands in split-band coding schemes from impairing coding
accuracy, without forgoing the efficiency provided by adaptive bit
allocation, a method employing AQJs to code the sub-band signals together
with vector quantization of the bit allocation patterns was also
proposed.
Finally, 'pipeline' methods of bit allocation and step size estimation
(using the Fast Fourier Transform (FFT) on the input signal) were examined.
Such methods, although less accurate, are nevertheless useful in
limiting coding delay associated with SRC schemes employing Quadrature
Mirror Filters (QMF)
Novel Pitch Detection Algorithm With Application to Speech Coding
This thesis introduces a novel method for accurate pitch detection and speech segmentation, named Multi-feature, Autocorrelation (ACR) and Wavelet Technique (MAWT). MAWT uses feature extraction, and ACR applied on Linear Predictive Coding (LPC) residuals, with a wavelet-based refinement step. MAWT opens the way for a unique approach to modeling: although speech is divided into segments, the success of voicing decisions is not crucial. Experiments demonstrate the superiority of MAWT in pitch period detection accuracy over existing methods, and illustrate its advantages for speech segmentation. These advantages are more pronounced for gain-varying and transitional speech, and under noisy conditions
Non-intrusive identification of speech codecs in digital audio signals
Speech compression has become an integral component in all modern telecommunications networks. Numerous codecs have been developed and deployed for efficiently transmitting voice signals while maintaining high perceptual quality. Because of the diversity of speech codecs used by different carriers and networks, the ability to distinguish between different codecs lends itself to a wide variety of practical applications, including determining call provenance, enhancing network diagnostic metrics, and improving automated speaker recognition. However, few research efforts have attempted to provide a methodology for identifying amongst speech codecs in an audio signal. In this research, we demonstrate a novel approach for accurately determining the presence of several contemporary speech codecs in a non-intrusive manner. The methodology developed in this research demonstrates techniques for analyzing an audio signal such that the subtle noise components introduced by the codec processing are accentuated while most of the original speech content is eliminated. Using these techniques, an audio signal may be profiled to gather a set of values that effectively characterize the codec present in the signal. This procedure is first applied to a large data set of audio signals from known codecs to develop a set of trained profiles. Thereafter, signals from unknown codecs may be similarly profiled, and the profiles compared to each of the known training profiles in order to decide which codec is the best match with the unknown signal. Overall, the proposed strategy generates extremely favorable results, with codecs being identified correctly in nearly 95% of all test signals. In addition, the profiling process is shown to require a very short analysis length of less than 4 seconds of audio to achieve these results. Both the identification rate and the small analysis window represent dramatic improvements over previous efforts in speech codec identification
Coding Strategies for Cochlear Implants Under Adverse Environments
Cochlear implants are electronic prosthetic devices that restores partial hearing in patients with severe to profound hearing loss. Although most coding strategies have significantly improved the perception of speech in quite listening conditions, there remains limitations on speech perception under adverse environments such as in background noise, reverberation and band-limited channels, and we propose strategies that improve the intelligibility of speech transmitted over the telephone networks, reverberated speech and speech in the presence of background noise. For telephone processed speech, we propose to examine the effects of adding low-frequency and high- frequency information to the band-limited telephone speech. Four listening conditions were designed to simulate the receiving frequency characteristics of telephone handsets. Results indicated improvement in cochlear implant and bimodal listening when telephone speech was augmented with high frequency information and therefore this study provides support for design of algorithms to extend the bandwidth towards higher frequencies. The results also indicated added benefit from hearing aids for bimodal listeners in all four types of listening conditions. Speech understanding in acoustically reverberant environments is always a difficult task for hearing impaired listeners. Reverberated sounds consists of direct sound, early reflections and late reflections. Late reflections are known to be detrimental to speech intelligibility. In this study, we propose a reverberation suppression strategy based on spectral subtraction to suppress the reverberant energies from late reflections. Results from listening tests for two reverberant conditions (RT60 = 0.3s and 1.0s) indicated significant improvement when stimuli was processed with SS strategy. The proposed strategy operates with little to no prior information on the signal and the room characteristics and therefore, can potentially be implemented in real-time CI speech processors. For speech in background noise, we propose a mechanism underlying the contribution of harmonics to the benefit of electroacoustic stimulations in cochlear implants. The proposed strategy is based on harmonic modeling and uses synthesis driven approach to synthesize the harmonics in voiced segments of speech. Based on objective measures, results indicated improvement in speech quality. This study warrants further work into development of algorithms to regenerate harmonics of voiced segments in the presence of noise
A Parametric Sound Object Model for Sound Texture Synthesis
This thesis deals with the analysis and synthesis of sound textures based on parametric sound objects. An overview is provided about the acoustic and perceptual principles of textural acoustic scenes, and technical challenges for analysis and synthesis are considered. Four essential processing steps for sound texture analysis are identifi ed, and existing sound texture systems are reviewed, using the four-step model as a guideline. A theoretical framework for analysis and synthesis is proposed. A parametric sound object synthesis (PSOS) model is introduced, which is able to describe individual recorded sounds through a fi xed set of parameters. The model, which applies to harmonic and noisy sounds, is an extension of spectral modeling and uses spline curves to approximate spectral envelopes, as well as the evolution of parameters over time. In contrast to standard spectral modeling techniques, this representation uses the concept of objects instead of concatenated frames, and it provides a direct mapping between sounds of diff erent length. Methods for automatic and manual conversion are shown. An evaluation is presented in which the ability of the model to encode a wide range of di fferent sounds has been examined. Although there are aspects of sounds that the model cannot accurately capture, such as polyphony and certain types of fast modulation, the results indicate that high quality synthesis can be achieved for many different acoustic phenomena, including instruments and animal vocalizations. In contrast to many other forms of sound encoding, the parametric model facilitates various techniques of machine learning and intelligent processing, including sound clustering and principal component analysis. Strengths and weaknesses of the proposed method are reviewed, and possibilities for future development are discussed
Graph Spectral Image Processing
Recent advent of graph signal processing (GSP) has spurred intensive studies
of signals that live naturally on irregular data kernels described by graphs
(e.g., social networks, wireless sensor networks). Though a digital image
contains pixels that reside on a regularly sampled 2D grid, if one can design
an appropriate underlying graph connecting pixels with weights that reflect the
image structure, then one can interpret the image (or image patch) as a signal
on a graph, and apply GSP tools for processing and analysis of the signal in
graph spectral domain. In this article, we overview recent graph spectral
techniques in GSP specifically for image / video processing. The topics covered
include image compression, image restoration, image filtering and image
segmentation
- …