Impacts of Mobility Models on RPL-Based Mobile IoT Infrastructures: An Evaluative Comparison and Survey

With the widespread use of IoT applications and the increasing trend in the number of connected smart devices, the concept of routing has become very challenging. In this regard, the IPv6 Routing Protocol for Low-power and Lossy Networks (PRL) was standardized to be adopted in IoT networks. Nevertheless, while mobile IoT domains have gained significant popularity in recent years, since RPL was fundamentally designed for stationary IoT applications, it could not well adjust with the dynamic fluctuations in mobile applications. While there have been a number of studies on tuning RPL for mobile IoT applications, but still there is a high demand for more efforts to reach a standard version of this protocol for such applications. Accordingly, in this survey, we try to conduct a precise and comprehensive experimental study on the impact of various mobility models on the performance of a mobility-aware RPL to help this process. In this regard, a complete and scrutinized survey of the mobility models has been presented to be able to fairly justify and compare the outcome results. A significant set of evaluations has been conducted via precise IoT simulation tools to monitor and compare the performance of the network and its IoT devices in mobile RPL-based IoT applications under the presence of different mobility models from different perspectives including power consumption, reliability, latency, and control packet overhead. This will pave the way for researchers in both academia and industry to be able to compare the impact of various mobility models on the functionality of RPL, and consequently to design and implement application-specific and even a standard version of this protocol, which is capable of being employed in mobile IoT applications

Robotic Wireless Sensor Networks

In this chapter, we present a literature survey of an emerging, cutting-edge, and multi-disciplinary field of research at the intersection of Robotics and Wireless Sensor Networks (WSN) which we refer to as Robotic Wireless Sensor Networks (RWSN). We define a RWSN as an autonomous networked multi-robot system that aims to achieve certain sensing goals while meeting and maintaining certain communication performance requirements, through cooperative control, learning and adaptation. While both of the component areas, i.e., Robotics and WSN, are very well-known and well-explored, there exist a whole set of new opportunities and research directions at the intersection of these two fields which are relatively or even completely unexplored. One such example would be the use of a set of robotic routers to set up a temporary communication path between a sender and a receiver that uses the controlled mobility to the advantage of packet routing. We find that there exist only a limited number of articles to be directly categorized as RWSN related works whereas there exist a range of articles in the robotics and the WSN literature that are also relevant to this new field of research. To connect the dots, we first identify the core problems and research trends related to RWSN such as connectivity, localization, routing, and robust flow of information. Next, we classify the existing research on RWSN as well as the relevant state-of-the-arts from robotics and WSN community according to the problems and trends identified in the first step. Lastly, we analyze what is missing in the existing literature, and identify topics that require more research attention in the future

Recent Trends in Communication Networks

In recent years there has been many developments in communication technology. This has greatly enhanced the computing power of small handheld resource-constrained mobile devices. Different generations of communication technology have evolved. This had led to new research for communication of large volumes of data in different transmission media and the design of different communication protocols. Another direction of research concerns the secure and error-free communication between the sender and receiver despite the risk of the presence of an eavesdropper. For the communication requirement of a huge amount of multimedia streaming data, a lot of research has been carried out in the design of proper overlay networks. The book addresses new research techniques that have evolved to handle these challenges

Review on energy efficient opportunistic routing protocol for underwater wireless sensor networks

Currently, the Underwater Sensor Networks (UWSNs) is mainly an interesting area due to its ability to provide a technology to gather many valuable data from underwater environment such as tsunami monitoring sensor, military tactical application, environmental monitoring and many more. However, UWSNs is suffering from limited energy, high packet loss and the use of acoustic communication. In UWSNs most of the energy consumption is used during the forwarding of packet data from the source to the destination. Therefore, many researchers are eager to design energy efficient routing protocol to minimize energy consumption in UWSNs. As the opportunistic routing (OR) is the most promising method to be used in UWSNs, this paper focuses on the existing proposed energy efficient OR protocol in UWSNs. This paper reviews the existing proposed energy efficient OR protocol, classifying them into 3 categories namely sender-side-based, receiver-side-based and hybrid. Furthermore each of the protocols is reviewed in detail, and its advantages and disadvantages are discussed. Finally, we discuss potential future work research directions in UWSNs, especially for energy efficient OR protocol design

MAC/Routing design for under water sensor networks

The huge advances in communication technologies and Micro Electrical and Mechanical Systems (MEMS) have triggered a revolution in sensor networks. One major application of sensor networks is in the investigation of complex and uninhabited under water surfaces; such sensor networks are called the Underwater Wireless Sensor Networks (UWSN). UWSN comprises of a number of sensors which are submerged in water and one or several surface stations or a sinks at which the sensed data is collected. In some underwater sensor applications, autonomous underwater vehicles (AUVs) could be used. The underwater sensor nodes communicate with each other using acoustic signals. Applications for this type of networks include oceanographic data collection, pollution monitoring, offshore exploration and tactical surveillance applications. The novel networking paradigm of UWSN is facing a totally different operating environment than the ground based wireless sensor networks. This introduces new challenges such as huge propagation delays, and limited acoustic link capacity with high attenuation factors. These new challenges have their own impact on the design of most of the networking layers preventing researchers from using the same layers used for other networks. The most affected layers are the Physical, Medium Access Control (MAC), Routing and Transport layers. This work will introduce novel routing and MAC layers’ protocols for UWSNs. The routing protocol will adopt the minimum spanning tree algorithm and focus on maximizing the connectivity of the network, which means maximizing the total number of nodes connected to the root or the sink in this case. The protocol will try also to provide a minimum hop connection for all the nodes in the network taking into account the residual energy, location information and number of children at the next hop node. The other contribution of this work is a MAC Protocol which will incorporate the topology information provided by the routing protocol to minimize the collisions and energy wastage in data transmission. The MAC Protocol will also try to shorten the queuing delays at the intermediate nodes for a message traveling from source to the sink. A comparison will be conducted with other existing routing and MAC protocols. The routing protocol will be tested and compared with the E-Span spanning tree algorithm for data aggregation. The MAC protocol will be compared with Park\u27s protocol proposed in [2] in terms of performance metrics like end-to-end delay and the number of collisions. We will also explore the ability of the proposed protocols to enhance the life span of the network

Network tomography application in mobile ad-hoc networks.

The memorability of mobile ad-hoc network (MANET) is the precondition of its management, performance optimization and network resources re-allocations. The traditional network interior measurement technique performs measurement on the nodes or links directly, and obtains the node or link performance through analyzing the measurement sample, which usually is used in the wired networks measurement based on the solid infrastructure. However, MANET is an infrastructure-free, multihop, and self-organized temporary network, comprised of a group of mobile nodes with wireless communication devices. Not only does its topology structure vary with time, but also the communication protocol used in its network layer or data link layer is diverse and non-standard. Specially, with the limitation of node energy and wireless bandwidth, the traditional interior network measurement technique is not suited for the measurement requirement of MANET. In order to solve the problem of interior links performance (such as packet loss rate and delay) measurement in MANET, this dissertation has adopted an external measurement based on network tomography (NT). Being a new measurement technology, NT collects the sample of path performance based on end-to-end measurement to infer the probability distribution of the network logical links performance parameters by using mathematical statistics theory, which neither need any cooperation from internal network, nor dependence from communication protocols, and has the merit of being deployed exibly. Thus from our literature review it can be concluded that Network Tomography technique is adaptable for ad-hoc network measurement. We have the following contribution in the eld of ad-hoc network performance: PLE Algorithm: We developed the PLE algorithm based on EM model, which statistically infer the link performance. Stitching Algorithm: Stitching algorithm is based on the isomorphic properties of a directed graph. The proposed algorithm concatenates the links, which are common over various steady state period and carry forward the ones, which are not. Hence in the process it gives the network performance analysis of the entire network over the observation period. EM routing: EM routing is based on the statistical inference calculated by our PLE algorithm. EM routing provides multiple performance metric such as link delay and hops of all the possible path in various time period in a wireless mesh network

Performance Analysis and Comparison of Multiple Routing Protocols in a Large-Area, High Speed Mobile Node Ad Hoc Network

The U.S. Air Force is interested in developing a standard ad hoc framework using heavy aircraft to route data across large regions. The Zone Routing Protocol (ZRP) has the potential to provide seamless large-scale routing for DOD under the Joint Tactical Radio System program. The goal of this study is to determine if there is a difference between routing protocol performance when operating in a large-area MANET with high-speed mobile nodes. This study analyzes MANET performance when using reactive, proactive, and hybrid routing protocols, specifically AODV, DYMO, Fisheye, and ZRP. This analysis compares the performance of the four routing protocols under the same MANET conditions. Average end-to-end delay, number of packets received, and throughput are the performance metrics used. Reactive protocol performance is better than hybrid and proactive protocol performance in each metric. Average ETE delays are lower using AODV (1.17 secs) and DYMO (2.14 secs) than ZRP (201.9 secs) or Fisheye (169.7 secs). Number of packets received is higher using AODV (531.6) and DYMO (670.2) than ZRP (267.3) or Fisheye (186.3). Throughput is higher using AODV (66,500 bps) and DYMO (87,577 bps) than ZRP (33,659 bps) or Fisheye (23,630bps). The benefits of ZRP and Fisheye are not able to be taken advantage of in the MANET configurations modeled in this research using a heavy aircraft ad hoc framework

Mobile Ad Hoc Networks

Guiding readers through the basics of these rapidly emerging networks to more advanced concepts and future expectations, Mobile Ad hoc Networks: Current Status and Future Trends identifies and examines the most pressing research issues in Mobile Ad hoc Networks (MANETs). Containing the contributions of leading researchers, industry professionals, and academics, this forward-looking reference provides an authoritative perspective of the state of the art in MANETs. The book includes surveys of recent publications that investigate key areas of interest such as limited resources and the mobility of mobile nodes. It considers routing, multicast, energy, security, channel assignment, and ensuring quality of service. Also suitable as a text for graduate students, the book is organized into three sections: Fundamentals of MANET Modeling and Simulation—Describes how MANETs operate and perform through simulations and models Communication Protocols of MANETs—Presents cutting-edge research on key issues, including MAC layer issues and routing in high mobility Future Networks Inspired By MANETs—Tackles open research issues and emerging trends Illustrating the role MANETs are likely to play in future networks, this book supplies the foundation and insight you will need to make your own contributions to the field. It includes coverage of routing protocols, modeling and simulations tools, intelligent optimization techniques to multicriteria routing, security issues in FHAMIPv6, connecting moving smart objects to the Internet, underwater sensor networks, wireless mesh network architecture and protocols, adaptive routing provision using Bayesian inference, and adaptive flow control in transport layer using genetic algorithms

A cluster based communication architecture for distributed applications in mobile ad hoc networks

Thesis (Master)--Izmir Institute of Technology, Computer Engineering, Izmir, 2006Includes bibliographical references (leaves: 63-69)Text in English; Abstract: Turkish and Englishx, 85 leavesIn this thesis, we aim to design and implement three protocols on a hierarchical architecture to solve the balanced clustering, backbone formation and distributed mutual exclusion problems for mobile ad hoc network(MANET)s. Our ¯rst goal is to cluster the MANET into balanced partitions. Clustering is a widely used approach to ease implemen-tation of various problems such as routing and resource management in MANETs. We propose the Merging Clustering Algorithm(MCA) for clustering in MANETs that merges clusters to form higher level of clusters by increasing their levels. Secondly, we aim to con-struct a directed ring topology across clusterheads which were selected by MCA. Lastly, we implement the distributed mutual exclusion algorithm based on Ricart-Agrawala algo-rithm for MANETs(Mobile RA). Each cluster is represented by a coordinator node on the ring which implements distributed mutual exclusion algorithm on behalf of any member in the cluster it represents. We show the operations of the algorithms, analyze their time and message complexities and provide results in the simulation environment of ns2