Limiting Performance of Millimeter-Wave Communications in the Presence of a 3D Random Waypoint Mobility Model

This paper proposes a mathematical framework for evaluating the limiting capacity of a millimeter-wave (mmWave) communication involving a mobile user (MU) and a cellular base station. The investigation is realized considering a threedimensional (3D) space in which the random waypoint mobility model is used to probabilistically identify the location of the MUs. Besides, the analysis is developed accounting for path-loss attenuation, directional antenna gains, shadowing, and modulation scheme. Closed-form formulas for the received signal power, the Shannon capacity, and the bit error rate (BER) are obtained for both line-of-sight (LoS) and non-LoS scenarios in the presence of a noise-limited operating regime. The conceived theoretical model is firstly checked by Monte Carlo validations, and then employed to explore the influence of the antenna gain and of the cell radius on the capacity and on the BER of a fifth-generation (5G) link in a 3D environment, taking into account both the 28 and 73 GHz mmWave bands

Performance Evaluation of Mobility Effects on Various Transmission Modes in the LTE Network

Long Term Evolution (LTE) system uses Internet Protocol (IP) based network architecture and advanced multi-antenna techniques to provide higher system throughput and high user mobility, intern to support low delay multimedia services such as voice, real time video connections and effective internet connectivity without any disruption. Hence in this paper, an attempt has been made to analyze the impact of mobility on the Quality of Service (QoS) parameters such as average throughput, average jitter and average delay of a LTE network for various transmission modes such as Serial-Input Serial-Output (SISO), Transmit Diversity, Receive Diversity and Open Loop Spatial Multiplexing (OLSM)

IoT System Integrating Unmanned Aerial Vehicles and LoRa Technology: A Performance Evaluation Study

Nowadays, the popularity of the unmanned aerial vehicles (UAVs) is high, and it is expected that, in the next years, the implementation of UAVs in day-to-day service will be even greater. These new implementations make use of novel technologies encompassed under the term Internet of Things (IoT). One example of these technologies is Long-Range (LoRa), classified as a Low-Power Wide-Area Network (LPWAN) with low-cost, low-power consumption, large coverage area, and the possibility of a high number of connected devices. One fundamental part of a proper UAV-based IoT service deployment is performance evaluation. However, there is no standardized methodology for assessing the performance in these scenarios. This article presents a case study of an integrated UAV-LoRa system employed for air-quality monitoring. Each UAV is equipped with a set of sensors to measure several indicators of air pollution. In addition, each UAV also incorporates an embedded LoRa node for communication purposes. Given that mobility is key when evaluating the performance of these types of systems, we study eight different mobility models, focusing on the effect that the number of UAVs and their flying speed have on system performance. Through extensive simulations, performance is evaluated via multiple quality dimensions, encompassing the whole process from data acquisition to user experience. Results show that our performance evaluation methodology allows a complete understanding of the operation, and for this specific case study, the mobility model with the best performance is Pathway because the LoRa nodes are distributed and move orderly throughout the coverage area.This work was supported by the AEI/FEDER-UE Project grant (TEC2016-76465.C2-1-R) (AIM)

Modelling and performance analysis of mobile ad hoc networks

PhD ThesisMobile Ad hoc Networks (MANETs) are becoming very attractive and useful in many kinds of communication and networking applications. This is due to their efficiency, relatively low cost, and flexibility provided by their dynamic infrastructure. Performance evaluation of mobile ad hoc networks is needed to compare various architectures of the network for their performance, study the effect of varying certain network parameters and study the interaction between various parameters that characterise the network. It can help in the design and implementation of MANETs. It is to be noted that most of the research that studies the performance of MANETs were evaluated using discrete event simulation (DES) utilising a broad band of network simulators. The principle drawback of DES models is the time and resources needed to run such models for large realistic systems, especially when results with a high accuracy are desired. In addition, studying typical problems such as the deadlock and concurrency in MANETs using DES is hard because network simulators implement the network at a low abstraction level and cannot support specifications at higher levels. Due to the advantage of quick construction and numerical analysis, analytical modelling techniques, such as stochastic Petri nets and process algebra, have been used for performance analysis of communication systems. In addition, analytical modelling is a less costly and more efficient method. It generally provides the best insight into the effects of various parameters and their interactions. Hence, analytical modelling is the method of choice for a fast and cost effective evaluation of mobile ad hoc networks. To the best of our knowledge, there is no analytical study that analyses the performance of multi-hop ad hoc networks, where mobile nodes move according to a random mobility model, in terms of the end-to-end delay and throughput. This work ii presents a novel analytical framework developed using stochastic reward nets and mathematical modelling techniques for modelling and analysis of multi-hop ad hoc networks, based on the IEEE 802.11 DCF MAC protocol, where mobile nodes move according to the random waypoint mobility model. The proposed framework is used to analysis the performance of multi-hop ad hoc networks as a function of network parameters such as the transmission range, carrier sensing range, interference range, number of nodes, network area size, packet size, and packet generation rate. The proposed framework is organized into several models to break up the complexity of modelling the complete network and make it easier to analyse each model as required. This is based on the idea of decomposition and fixed point iteration of stochastic reward nets. The proposed framework consists of a mathematical model and four stochastic reward nets models; the path analysis model, data link layer model, network layer model and transport layer model. These models are arranged in a way similar to the layers of the OSI protocol stack model. The mathematical model is used to compute the expected number of hops between any source-destination pair; and the average number of carrier sensing, hidden, and interfering nodes. The path analysis model analyses the dynamic of paths in the network due to the node mobility in terms of the path connection availability and rate of failure and repair. The data link layer model describes the behaviour of the IEEE 802.11 DCF MAC protocol. The actions in the network layer are modelled by the network layer model. The transport layer model represents the behaviour of the transport layer protocols. The proposed models are validated using extensive simulations

A Novel Communications Protocol Using Geographic Routing for Swarming UAVs Performing a Search Mission

This research develops the UAV Search Mission Protocol (USMP) for swarming UAVs and determines the protocol\u27s effect on search mission performance. It is hypothesized that geographically routing USMP messages improves search performance by providing geography-dependent data to locations where it impacts search decisions. It is also proposed that the swarm can use data collected by the geographic routing protocol to accurately determine UAV locations and avoid sending explicit location updates. The hypothesis is tested by developing several USMP designs that are combined with the Greedy Perimeter Stateless Routing (GPSR) protocol and a search mission swarm logic into a single network simulation. The test designs use various transmission power levels, sensor types and swarm sizes. The simulation collects performance metrics for each scenario, including measures of distance traveled, UAV direction changes, number of searches and search concentration. USMP significantly improves mission performance over scenarios without inter-UAV communication. However, protocol designs that simply broadcast messages improve search performance by 83% in total searches and 20% in distance traveled compared to geographic routing candidates. Additionally, sending explicit location updates generates 3%-6% better performance per metric versus harvesting GPSR\u27s location information

Towards Viable Large Scale Heterogeneous Wireless Networks

We explore radio resource allocation and management issues related to a large-scale heterogeneous (hetnet) wireless system made up of several Radio Access Technologies (RATs) that collectively provide a unified wireless network to a diverse set of users through co-ordination managed by a centralized Global Resource Controller (GRC). We incorporate 3G cellular technologies HSPA and EVDO, 4G cellular technologies WiMAX and LTE, and WLAN technology Wi-Fi as the RATs in our hetnet wireless system. We assume that the user devices are either multi-modal or have one or more reconfigurable radios which makes it possible for each device to use any available RAT at any given time subject to resource-sharing agreements. For such a hetnet system where resource allocation is coordinated at a global level, characterizing the network performance in terms of various conflicting network efficiency objectives that takes costs associated with a network re-association operation into account largely remains an open problem. Also, all the studies to-date that try to characterize the network performance of a hetnet system do not account for RAT-specific implementation details and the management overhead associated with setting up a centralized control. We study the radio resource allocation problem and the implementation/management overhead issues associated with a hetnet system in two research phases. In the first phase, we develop cost models associated with network re-association in terms of increased power consumption and communication downtime taking into account various user device assumptions. Using these cost models in our problem formulations, the first phase focuses on resource allocation strategies where we use a high-level system modeling approach to study the achievable performance in terms of conflicting network efficiency measures of spectral efficiency, overall power consumption, and instantaneous and long-term fairness for each user in the hetnet system. Our main result from this phase of study suggests that the gain in spectral efficiency due to multi-access network diversity results in a tremendous increase in overall power consumption due to frequent re-associations required by user devices. We then develop a utility function-based optimization algorithm to characterize and achieve a desired tradeoff in terms of all four network efficiency measures of spectral efficiency, overall power consumption and instantaneous and long-term fairness. We show an increase in a multi-attribute system utility measure of up to 56.7% for our algorithm compared to other widely studied resource allocation algorithms including max-sum rate, proportional fairness, max-min fairness and min power. The second phase of our research study focuses on practical implementation issues including the overhead required to implement a centralized GRC solution in a hetnet system. Through detailed protocol level simulations performed in ns-2, we show an increase in spectral efficiency of up to 99% and an increase in instantaneous fairness of up to 28.5% for two sort-based user device-to-Access Point (AP)/Base Station (BS) association algorithms implemented at the GRC that aim to maximize system spectral efficiency and instantaneous fairness performance metrics respectively compared to a distributed solution where each user makes his/her own association decision. The efficiency increase for each respective attribute again results in a tremendous increase in power consumption of up to 650% and 794% for each respective algorithm implemented at the GRC compared to a distributed solution because of frequent re-associations