1,702 research outputs found
Performance Evaluation of Impulse Radio UWB Systems with Pulse-Based Polarity Randomization
In this paper, the performance of a binary phase shift keyed random
time-hopping impulse radio system with pulse-based polarity randomization is
analyzed. Transmission over frequency-selective channels is considered and the
effects of inter-frame interference and multiple access interference on the
performance of a generic Rake receiver are investigated for both synchronous
and asynchronous systems. Closed form (approximate) expressions for the
probability of error that are valid for various Rake combining schemes are
derived. The asynchronous system is modelled as a chip-synchronous system with
uniformly distributed timing jitter for the transmitted pulses of interfering
users. This model allows the analytical technique developed for the synchronous
case to be extended to the asynchronous case. An approximate closed-form
expression for the probability of bit error, expressed in terms of the
autocorrelation function of the transmitted pulse, is derived for the
asynchronous case. Then, transmission over an additive white Gaussian noise
channel is studied as a special case, and the effects of multiple-access
interference is investigated for both synchronous and asynchronous systems. The
analysis shows that the chip-synchronous assumption can result in
over-estimating the error probability, and the degree of over-estimation mainly
depends on the autocorrelation function of the ultra-wideband pulse and the
signal-to-interference-plus-noise-ratio of the system. Simulations studies
support the approximate analysis.Comment: To appear in the IEEE Transactions on Signal Processin
Ultra Wideband Impulse Radio Systems with Multiple Pulse Types
In an ultra wideband (UWB) impulse radio (IR) system, a number of pulses,
each transmitted in an interval called a "frame", is employed to represent one
information symbol. Conventionally, a single type of UWB pulse is used in all
frames of all users. In this paper, IR systems with multiple types of UWB
pulses are considered, where different types of pulses can be used in different
frames by different users. Both stored-reference (SR) and transmitted-reference
(TR) systems are considered. First, the spectral properties of a multi-pulse IR
system with polarity randomization is investigated. It is shown that the
average power spectral density is the average of the spectral contents of
different pulse shapes. Then, approximate closed-form expressions for the bit
error probability of a multi-pulse SR-IR system are derived for RAKE receivers
in asynchronous multiuser environments. The effects of both inter-frame
interference (IFI) and multiple-access interference (MAI) are analyzed. The
theoretical and simulation results indicate that SR-IR systems that are more
robust against IFI and MAI than a "conventional" SR-IR system can be designed
with multiple types of ultra-wideband pulses. Finally, extensions to
multi-pulse TR-IR systems are briefly described.Comment: To appear in the IEEE Journal on Selected Areas in Communications -
Special Issue on Ultrawideband Wireless Communications: Theory and
Application
A low-cost time-hopping impulse radio system for high data rate transmission
We present an efficient, low-cost implementation of time-hopping impulse
radio that fulfills the spectral mask mandated by the FCC and is suitable for
high-data-rate, short-range communications. Key features are: (i) all-baseband
implementation that obviates the need for passband components, (ii) symbol-rate
(not chip rate) sampling, A/D conversion, and digital signal processing, (iii)
fast acquisition due to novel search algorithms, (iv) spectral shaping that can
be adapted to accommodate different spectrum regulations and interference
environments. Computer simulations show that this system can provide 110Mbit/s
at 7-10m distance, as well as higher data rates at shorter distances under FCC
emissions limits. Due to the spreading concept of time-hopping impulse radio,
the system can sustain multiple simultaneous users, and can suppress narrowband
interference effectively.Comment: To appear in EURASIP Journal on Applied Signal Processing (Special
Issue on UWB - State of the Art
Impulse Radio Systems with Multiple Types of Ultra-Wideband Pulses
Spectral properties and performance of multi-pulse impulse radio
ultra-wideband systems with pulse-based polarity randomization are analyzed.
Instead of a single type of pulse transmitted in each frame, multiple types of
pulses are considered, which is shown to reduce the effects of multiple-access
interference. First, the spectral properties of a multi-pulse impulse radio
system is investigated. It is shown that the power spectral density is the
average of spectral contents of different pulse shapes. Then, approximate
closed-form expressions for bit error probability of a multi-pulse impulse
radio system are derived for RAKE receivers in asynchronous multiuser
environments. The theoretical and simulation results indicate that impulse
radio systems that are more robust against multiple-access interference than a
"classical" impulse radio system can be designed with multiple types of
ultra-wideband pulses.Comment: To be presented at the 2005 Conference on Information Sciences and
System
The Trade-off between Processing Gains of an Impulse Radio UWB System in the Presence of Timing Jitter
In time hopping impulse radio, pulses of duration are transmitted
for each information symbol. This gives rise to two types of processing gain:
(i) pulse combining gain, which is a factor , and (ii) pulse spreading
gain, which is , where is the mean interval between two
subsequent pulses. This paper investigates the trade-off between these two
types of processing gain in the presence of timing jitter. First, an additive
white Gaussian noise (AWGN) channel is considered and approximate closed form
expressions for bit error probability are derived for impulse radio systems
with and without pulse-based polarity randomization. Both symbol-synchronous
and chip-synchronous scenarios are considered. The effects of multiple-access
interference and timing jitter on the selection of optimal system parameters
are explained through theoretical analysis. Finally, a multipath scenario is
considered and the trade-off between processing gains of a synchronous impulse
radio system with pulse-based polarity randomization is analyzed. The effects
of the timing jitter, multiple-access interference and inter-frame interference
are investigated. Simulation studies support the theoretical results.Comment: To appear in the IEEE Transactions on Communication
Performance Analysis and Enhancement of Multiband OFDM for UWB Communications
In this paper, we analyze the frequency-hopping orthogonal frequency-division
multiplexing (OFDM) system known as Multiband OFDM for high-rate wireless
personal area networks (WPANs) based on ultra-wideband (UWB) transmission.
Besides considering the standard, we also propose and study system performance
enhancements through the application of Turbo and Repeat-Accumulate (RA) codes,
as well as OFDM bit-loading. Our methodology consists of (a) a study of the
channel model developed under IEEE 802.15 for UWB from a frequency-domain
perspective suited for OFDM transmission, (b) development and quantification of
appropriate information-theoretic performance measures, (c) comparison of these
measures with simulation results for the Multiband OFDM standard proposal as
well as our proposed extensions, and (d) the consideration of the influence of
practical, imperfect channel estimation on the performance. We find that the
current Multiband OFDM standard sufficiently exploits the frequency selectivity
of the UWB channel, and that the system performs in the vicinity of the channel
cutoff rate. Turbo codes and a reduced-complexity clustered bit-loading
algorithm improve the system power efficiency by over 6 dB at a data rate of
480 Mbps.Comment: 32 pages, 10 figures, 1 table. Submitted to the IEEE Transactions on
Wireless Communications (Sep. 28, 2005). Minor revisions based on reviewers'
comments (June 23, 2006
Indoor wireless communications and applications
Chapter 3 addresses challenges in radio link and system design in indoor scenarios. Given the fact that most human activities take place in indoor environments, the need for supporting ubiquitous indoor data connectivity and location/tracking service becomes even more important than in the previous decades. Specific technical challenges addressed in this section are(i), modelling complex indoor radio channels for effective antenna deployment, (ii), potential of millimeter-wave (mm-wave) radios for supporting higher data rates, and (iii), feasible indoor localisation and tracking techniques, which are summarised in three dedicated sections of this chapter
- …