3,222 research outputs found
A Novel Millimeter-Wave Channel Simulator and Applications for 5G Wireless Communications
This paper presents details and applications of a novel channel simulation
software named NYUSIM, which can be used to generate realistic temporal and
spatial channel responses to support realistic physical- and link-layer
simulations and design for fifth-generation (5G) cellular communications.
NYUSIM is built upon the statistical spatial channel model for broadband
millimeter-wave (mmWave) wireless communication systems developed by
researchers at New York University (NYU). The simulator is applicable for a
wide range of carrier frequencies (500 MHz to 100 GHz), radio frequency (RF)
bandwidths (0 to 800 MHz), antenna beamwidths (7 to 360 degrees for azimuth and
7 to 45 degrees for elevation), and operating scenarios (urban microcell, urban
macrocell, and rural macrocell), and also incorporates multiple-input
multiple-output (MIMO) antenna arrays at the transmitter and receiver. This
paper also provides examples to demonstrate how to use NYUSIM for analyzing
MIMO channel conditions and spectral efficiencies, which show that NYUSIM is an
alternative and more realistic channel model compared to the 3rd Generation
Partnership Project (3GPP) and other channel models for mmWave bands.Comment: 7 pages, 8 figures, in 2017 IEEE International Conference on
Communications (ICC), Paris, May 201
Frame Structure Design and Analysis for Millimeter Wave Cellular Systems
The millimeter-wave (mmWave) frequencies have attracted considerable
attention for fifth generation (5G) cellular communication as they offer orders
of magnitude greater bandwidth than current cellular systems. However, the
medium access control (MAC) layer may need to be significantly redesigned to
support the highly directional transmissions, ultra-low latencies and high peak
rates expected in mmWave communication. To address these challenges, we present
a novel mmWave MAC layer frame structure with a number of enhancements
including flexible, highly granular transmission times, dynamic control signal
locations, extended messaging and ability to efficiently multiplex directional
control signals. Analytic formulae are derived for the utilization and control
overhead as a function of control periodicity, number of users, traffic
statistics, signal-to-noise ratio and antenna gains. Importantly, the analysis
can incorporate various front-end MIMO capability assumptions -- a critical
feature of mmWave. Under realistic system and traffic assumptions, the analysis
reveals that the proposed flexible frame structure design offers significant
benefits over designs with fixed frame structures similar to current 4G
long-term evolution (LTE). It is also shown that fully digital beamforming
architectures offer significantly lower overhead compared to analog and hybrid
beamforming under equivalent power budgets.Comment: Submitted to IEEE Transactions for Wireless Communication
Experimental study of MIMO-OFDM transmissions at 94 GHz in indoor environments
Millimeter wave (mm-wave) frequencies have been proposed to achieve high capacity in 5G communications. Although meaningful research on the channel characteristics has been performed in the 28, 38and 60 GHz bands ─in both indoor and short-range scenarios─,only a small number of trials (experiments) have been carried out in other mm-wave bands. The objective of this work is to study the viability and evaluate the performance of the 94 GHz frequency band for MIMO-OFDM transmission in an indoor environment. Starting from a measurement campaign, the performance of MIMO algorithms is studied in terms of throughput for four different antenna configurations.This work was supported in part by the Ministerio de EconomĂa y Competitividad MINECO, Spain under Grant TEC2016-78028-C3-2-P, and in part by the European FEDER funds
End-to-End Simulation of 5G mmWave Networks
Due to its potential for multi-gigabit and low latency wireless links,
millimeter wave (mmWave) technology is expected to play a central role in 5th
generation cellular systems. While there has been considerable progress in
understanding the mmWave physical layer, innovations will be required at all
layers of the protocol stack, in both the access and the core network.
Discrete-event network simulation is essential for end-to-end, cross-layer
research and development. This paper provides a tutorial on a recently
developed full-stack mmWave module integrated into the widely used open-source
ns--3 simulator. The module includes a number of detailed statistical channel
models as well as the ability to incorporate real measurements or ray-tracing
data. The Physical (PHY) and Medium Access Control (MAC) layers are modular and
highly customizable, making it easy to integrate algorithms or compare
Orthogonal Frequency Division Multiplexing (OFDM) numerologies, for example.
The module is interfaced with the core network of the ns--3 Long Term Evolution
(LTE) module for full-stack simulations of end-to-end connectivity, and
advanced architectural features, such as dual-connectivity, are also available.
To facilitate the understanding of the module, and verify its correct
functioning, we provide several examples that show the performance of the
custom mmWave stack as well as custom congestion control algorithms designed
specifically for efficient utilization of the mmWave channel.Comment: 25 pages, 16 figures, submitted to IEEE Communications Surveys and
Tutorials (revised Jan. 2018
Resource allocation for transmit hybrid beamforming in decoupled millimeter wave multiuser-MIMO downlink
This paper presents a study on joint radio resource allocation and hybrid precoding in multicarrier massive multiple-input multiple-output communications for 5G cellular networks. In this paper, we present the resource allocation algorithm to maximize the proportional fairness (PF) spectral efficiency under the per subchannel power and the beamforming rank constraints. Two heuristic algorithms are designed. The proportional fairness hybrid beamforming algorithm provides the transmit precoder with a proportional fair spectral efficiency among users for the desired number of radio-frequency (RF) chains. Then, we transform the number of RF chains or rank constrained optimization problem into convex semidefinite programming (SDP) problem, which can be solved by standard techniques. Inspired by the formulated convex SDP problem, a low-complexity, two-step, PF-relaxed optimization algorithm has been provided for the formulated convex optimization problem. Simulation results show that the proposed suboptimal solution to the relaxed optimization problem is near-optimal for the signal-to-noise ratio SNR <= 10 dB and has a performance gap not greater than 2.33 b/s/Hz within the SNR range 0-25 dB. It also outperforms the maximum throughput and PF-based hybrid beamforming schemes for sum spectral efficiency, individual spectral efficiency, and fairness index
Millimeter-wave Evolution for 5G Cellular Networks
Triggered by the explosion of mobile traffic, 5G (5th Generation) cellular
network requires evolution to increase the system rate 1000 times higher than
the current systems in 10 years. Motivated by this common problem, there are
several studies to integrate mm-wave access into current cellular networks as
multi-band heterogeneous networks to exploit the ultra-wideband aspect of the
mm-wave band. The authors of this paper have proposed comprehensive
architecture of cellular networks with mm-wave access, where mm-wave small cell
basestations and a conventional macro basestation are connected to
Centralized-RAN (C-RAN) to effectively operate the system by enabling power
efficient seamless handover as well as centralized resource control including
dynamic cell structuring to match the limited coverage of mm-wave access with
high traffic user locations via user-plane/control-plane splitting. In this
paper, to prove the effectiveness of the proposed 5G cellular networks with
mm-wave access, system level simulation is conducted by introducing an expected
future traffic model, a measurement based mm-wave propagation model, and a
centralized cell association algorithm by exploiting the C-RAN architecture.
The numerical results show the effectiveness of the proposed network to realize
1000 times higher system rate than the current network in 10 years which is not
achieved by the small cells using commonly considered 3.5 GHz band.
Furthermore, the paper also gives latest status of mm-wave devices and
regulations to show the feasibility of using mm-wave in the 5G systems.Comment: 17 pages, 12 figures, accepted to be published in IEICE Transactions
on Communications. (Mar. 2015
- …