Adoption of vehicular ad hoc networking protocols by networked robots

This paper focuses on the utilization of wireless networking in the robotics domain. Many researchers have already equipped their robots with wireless communication capabilities, stimulated by the observation that multi-robot systems tend to have several advantages over their single-robot counterparts. Typically, this integration of wireless communication is tackled in a quite pragmatic manner, only a few authors presented novel Robotic Ad Hoc Network (RANET) protocols that were designed specifically with robotic use cases in mind. This is in sharp contrast with the domain of vehicular ad hoc networks (VANET). This observation is the starting point of this paper. If the results of previous efforts focusing on VANET protocols could be reused in the RANET domain, this could lead to rapid progress in the field of networked robots. To investigate this possibility, this paper provides a thorough overview of the related work in the domain of robotic and vehicular ad hoc networks. Based on this information, an exhaustive list of requirements is defined for both types. It is concluded that the most significant difference lies in the fact that VANET protocols are oriented towards low throughput messaging, while RANET protocols have to support high throughput media streaming as well. Although not always with equal importance, all other defined requirements are valid for both protocols. This leads to the conclusion that cross-fertilization between them is an appealing approach for future RANET research. To support such developments, this paper concludes with the definition of an appropriate working plan

Robotic Wireless Sensor Networks

In this chapter, we present a literature survey of an emerging, cutting-edge, and multi-disciplinary field of research at the intersection of Robotics and Wireless Sensor Networks (WSN) which we refer to as Robotic Wireless Sensor Networks (RWSN). We define a RWSN as an autonomous networked multi-robot system that aims to achieve certain sensing goals while meeting and maintaining certain communication performance requirements, through cooperative control, learning and adaptation. While both of the component areas, i.e., Robotics and WSN, are very well-known and well-explored, there exist a whole set of new opportunities and research directions at the intersection of these two fields which are relatively or even completely unexplored. One such example would be the use of a set of robotic routers to set up a temporary communication path between a sender and a receiver that uses the controlled mobility to the advantage of packet routing. We find that there exist only a limited number of articles to be directly categorized as RWSN related works whereas there exist a range of articles in the robotics and the WSN literature that are also relevant to this new field of research. To connect the dots, we first identify the core problems and research trends related to RWSN such as connectivity, localization, routing, and robust flow of information. Next, we classify the existing research on RWSN as well as the relevant state-of-the-arts from robotics and WSN community according to the problems and trends identified in the first step. Lastly, we analyze what is missing in the existing literature, and identify topics that require more research attention in the future

AWARE: Platform for Autonomous self-deploying and operation of Wireless sensor-actuator networks cooperating with unmanned AeRial vehiclEs

This paper presents the AWARE platform that seeks to enable the cooperation of autonomous aerial vehicles with ground wireless sensor-actuator networks comprising both static and mobile nodes carried by vehicles or people. Particularly, the paper presents the middleware, the wireless sensor network, the node deployment by means of an autonomous helicopter, and the surveillance and tracking functionalities of the platform. Furthermore, the paper presents the first general experiments of the AWARE project that took place in March 2007 with the assistance of the Seville fire brigades

Routing schemes in FANETs: a survey

Flying ad hoc network (FANET) is a self-organizing wireless network that enables inexpensive, flexible, and easy-to-deploy flying nodes, such as unmanned aerial vehicles (UAVs), to communicate among themselves in the absence of fixed network infrastructure. FANET is one of the emerging networks that has an extensive range of next-generation applications. Hence, FANET plays a significant role in achieving application-based goals. Routing enables the flying nodes to collaborate and coordinate among themselves and to establish routes to radio access infrastructure, particularly FANET base station (BS). With a longer route lifetime, the effects of link disconnections and network partitions reduce. Routing must cater to two main characteristics of FANETs that reduce the route lifetime. Firstly, the collaboration nature requires the flying nodes to exchange messages and to coordinate among themselves, causing high energy consumption. Secondly, the mobility pattern of the flying nodes is highly dynamic in a three-dimensional space and they may be spaced far apart, causing link disconnection. In this paper, we present a comprehensive survey of the limited research work of routing schemes in FANETs. Different aspects, including objectives, challenges, routing metrics, characteristics, and performance measures, are covered. Furthermore, we present open issues

Analysis, evaluation and improvement of RT-WMP for real-time and QoS wireless communication: Applications in confined environments

En los ultimos años, la innovación tecnológica, la característica de flexibilidad y el rápido despligue de las redes inalámbricas, han favorecido la difusión de la redes móviles ad-hoc (MANETs), capaces de ofrecer servicios para tareas específicas entre nodos móviles. Los aspectos relacionados al dinamismo de la topología móvil y el acceso a un medio compartido por naturaleza hacen que sea preciso enfrentarse a clases de problemas distintos de los relacionados con la redes cableadas, atrayendo de este modo el interés de la comunidad científica. Las redes ad-hoc suelen soportar tráfico con garantía de servicio mínimo y la mayor parte de las propuestas presentes en literatura tratan de dar garantías de ancho de banda o minimizar el retardo de los mensajes. Sin embargo hay situaciones en las que estas garantías no son suficientes. Este es el caso de los sistemas que requieren garantías mas fuertes en la entrega de los mensajes, como es el caso de los sistemas de tiempo real donde la pérdida o el retraso de un sólo mensaje puede provocar problemas graves. Otras aplicaciones como la videoconferencia, cada vez más extendidas, implican un tráfico de datos con requisitos diferentes, como la calidad de servicio (QoS). Los requisitos de tiempo real y de QoS añaden nuevos retos al ya exigente servicio de comunicación inalámbrica entre estaciones móviles de una MANET. Además, hay aplicaciones en las que hay que tener en cuenta algo más que el simple encaminamiento de los mensajes. Este es el caso de aplicaciones en entornos subterráneos, donde el conocimiento de la evolución de propagación de la señal entre los diferentes nodos puede ser útil para mejorar la calidad de servicio y mantener la conectividad en cada momento. A pesar de ésto, dentro del amplio abanicos de propuestas presente en la literatura, existen un conjunto de limitaciones que van de el mero uso de protocolos simulados a propuestas que no tienen en cuenta entornos no convencionales o que resultan aisladas desde el punto de vista de la integración en sistemas complejos. En esta tesis doctoral, se propone un estudio completo sobre un plataforma inalámbrica de tiempo real, utilizando el protocolo RT-WMP capaz de gestionar trafíco multimedia al mismo tiempo y adaptado al entorno de trabajo. Se propone una extensión para el soporte a los datos con calidad de servicio sin limitar las caractaristícas temporales del protocolo básico. Y con el fin de tener en cuenta el efecto de la propagación de la señal, se caracteriza el entorno por medio de un conjunto de restricciones de conectividad. La solución ha sido desarrollada y su validez ha sido demostrada extensamente en aplicaciones reales en entornos subterráneos, en redes malladas y aplicaciones robóticas

Wireless Sensor Networks for Building Robotic Paths - A Survey of Problems and Restrictions

The conjugation of small nodes with sensing, communication and processing capabilities allows for the creation of wireless sensor networks (WSNs). These networks can be deployed to measure a very wide range of environmental phenomena and send data from remote locations back to users. They offer new and exciting possibilities for applications and research. This paper presents the background of WSNs by firstly exploring the different fields applications, with examples for each of these fields, then the challenges faced by these networks in areas such as energy-efficiency, node localization, node deployment, limited storage and routing. It aims at explaining each issue and giving solutions that have been proposed in the research literature. Finally, the paper proposes a practical scenario of deploying a WSN by autonomous robot path construction. The requirements for such a scenario and the open issues that can be tackled by it are exposed, namely the issues of associated with measuring RSSI, the degree of autonomy of the robot and connectivity restoration.The authors would like to acknowledge the company Inspiring Sci, Lda for the interest and valuable contribution to the successful development of this work.info:eu-repo/semantics/publishedVersio