Novel localised quality of service routing algorithms. Performance evaluation of some new localised quality of service routing algorithms based on bandwidth and delay as the metrics for candidate path selection.

The growing demand on the variety of internet applications requires management of large scale networks by efficient Quality of Service (QoS) routing, which considerably contributes to the QoS architecture. The biggest contemporary drawback in the maintenance and distribution of the global state is the increase in communication overheads. Unbalancing in the network, due to the frequent use of the links assigned to the shortest path retaining most of the network loads is regarded as a major problem for best effort service. Localised QoS routing, where the source nodes use statistics collected locally, is already described in contemporary sources as more advantageous. Scalability, however, is still one of the main concerns of existing localised QoS routing algorithms. The main aim of this thesis is to present and validate new localised algorithms in order to develop the scalability of QoS routing. Existing localised routing, Credit Based Routing (CBR) and Proportional Sticky Routing (PSR), use the blocking probability as a factor in selecting the routing paths and work with either credit or flow proportion respectively, which makes impossible having up-to-date information. Therefore our proposed Highest Minimum Bandwidth (HMB) and Highest Average Bottleneck Bandwidth History (HABBH) algorithms utilise bandwidth as the direct QoS criterion to select routing paths. We introduce an Integrated Delay Based Routing and Admission Control mechanism. Using this technique Minimum Total Delay (MTD), Low Fraction Failure (LFF) and Low Path Failure (LPF) were compared against the global QoS routing scheme, Dijkstra, and localised High Path Credit (HPC) scheme and showed superior performance. The simulation with the non-uniformly distributed traffic reduced blocking probability of the proposed algorithms. Therefore, we advocate the algorithms presented in the thesis, as a scalable approach to control large networks. We strongly suggest that bandwidth and mean delay are feasible QoS constraints to select optimal paths by locally collected information. We have demonstrated that a few good candidate paths can be selected to balance the load in the network and minimise communication overhead by applying the disjoint paths method, recalculation of candidate paths set and dynamic paths selection method. Thus, localised QoS routing can be used as a load balancing tool in order to improve the network resource utilization. A delay and bandwidth combination is one of the future prospects of our work, and the positive results presented in the thesis suggest that further development of a distributed approach in candidate paths selection may enhance the proposed localised algorithms.Umm AlQura University in Mecc

Localised Routing Algorithms with Quality of Service Constraints. Development and performance evaluation by simulation of new localised Quality of Service routing algorithms for communication networks using residual bandwidth and mean end-to-end delay as metrics.

School of Computing, Informatics and MediaLocalised QoS routing is a relatively new, alternative and viable approach to solve the problems of traditional QoS routing algorithms which use global state information resulting in the imposition of a large communication overhead and route flapping. They make use of a localised view of the network QoS state in source nodes to select paths and route flows to destination nodes. Proportional Sticky Routing (PSR) and Credit Based Routing (CBR) have been proposed as localised QoS routing schemes and these can offer comparable performances. However, since network state information for a specific path is only updated when the path is used, PSR and CBR operate with decision criteria that are often stale for paths that are used infrequently. The aim of this thesis is to focus on localised QoS routing and contribute to enhancing the scalability of QoS routing algorithms. In this thesis we have developed three new localised QoS routing schemes which are called Score Based QoS Routing (SBR), Bandwidth Based QoS Routing (BBR) and Delay Based Routing (DBR). In some of these schemes, the path setup procedure is distributed and uses the current network state to make decisions thus avoiding problems of staleness. The methods also avoid any complicated calculations. Both SBR and BBR use bandwidth as the QoS metric and mean delay is used as the QoS metric in DBR. Extensive simulations are applied to compare the performance of our proposed algorithms with CBR and the global Dijkstra¿s algorithm for different update intervals of link state, different network topologies and using different flow arrival distributions under a wide range of traffic loads. It is demonstrated by simulation that the three proposed algorithms offer a superior performance under comparable conditions to the other localised and global algorithms

Localized Quality of Service Routing Algorithms for Communication Networks. The Development and Performance Evaluation of Some New Localized Approaches to Providing Quality of Service Routing in Flat and Hierarchical Topologies for Computer Networks.

Quality of Service (QoS) routing considered as one of the major components of the QoS framework in communication networks. The concept of QoS routing has emerged from the fact that routers direct traffic from source to destination, depending on data types, network constraints and requirements to achieve network performance efficiency. It has been introduced to administer, monitor and improve the performance of computer networks. Many QoS routing algorithms are used to maximize network performance by balancing traffic distributed over multiple paths. Its major components include bandwidth, delay, jitter, cost, and loss probability in order to measure the end users¿ requirements, optimize network resource usage and balance traffic load. The majority of existing QoS algorithms require the maintenance of the global network state information and use it to make routing decisions. The global QoS network state needs to be exchanged periodically among routers since the efficiency of a routing algorithm depends on the accuracy of link-state information. However, most of QoS routing algorithms suffer from scalability problems, because of the high communication overhead and the high computation effort associated with marinating and distributing the global state information to each node in the network.The goal of this thesis is to contribute to enhancing the scalability of QoS routing algorithms. Motivated by this, the thesis is focused on localized QoS routing that is proposed to achieve QoS guarantees and overcome the problems of using global network state information such as high communication overhead caused by frequent state information updates, inaccuracy of link-state information for large QoS state update intervals and the route oscillating due to the view of state information. Using such an approach, the source node makes its own routing decisions based on the information that is local to each node in the path. Localized QoS routing does not need the global network state to be exchanged among network nodes because it infers the network state and avoids all the problems associated with it, like high communication and processing overheads and oscillating behaviour. In localized QoS routing each source node is required to first determine a set of candidate paths to each possible destination. In this thesis we have developed localized QoS routing algorithms that select a path based on its quality to satisfy the connection requirements. In the first part of the thesis a localized routing algorithm has been developed that relies on the average residual bandwidth that each path can support to make routing decisions. In the second part of the thesis, we have developed a localized delay-based QoS routing (DBR) algorithm which relies on a delay constraint that each path satisfies to make routing decisions. We also modify credit-based routing (CBR) so that this uses delay instead of bandwidth. Finally, we have developed a localized QoS routing algorithm for routing in two levels of a hierarchal network and this relies on residual bandwidth to make routing decisions in a hierarchical network like the internet. We have compared the performance of the proposed localized routing algorithms with other localized and global QoS routing algorithms under different ranges of workloads, system parameters and network topologies. Simulation results have indicated that the proposed algorithms indeed outperform algorithms that use the basics of schemes that currently operate on the internet, even for a small update interval of link state. The proposed algorithms have also reduced the routing overhead significantly and utilize network resources efficiently

Cross-Layer Design for QoS Routing in Multi-Hop Wireless Networks

Mobile Ad Hoc Networks (MANETs) are gaining increasing popularity in recent years because of their ease of deployment. They are distributed, dynamic, and self-configurable without infrastructure support. Routing in ad hoc networks is a challenging task because of the MANET dynamic nature. Hence, researchers were focused in designing best-effort distributed and dynamic routing protocols to ensure optimum network operations in an unpredictable wireless environment. Nowadays, there is an increased demand on multimedia applications (stringent delay and reliability requirements), which makes a shift from best-effort services to Quality of Services. Actually, the challenge in wireless ad hoc networks is that neighbor nodes share the same channel and they take part in forwarding packets. Therefore, the total effective channel capacity is not only limited by the raw channel capacity but is also limited by the interactions and interferences among neighboring nodes. Thus, such factors should be taken in consideration in order to offer QoS routing. While, some of the distributed QoS route selection algorithms assume the availability of such information, others propose mechanisms to estimate them. The goals of this thesis are: (i) to analyze the performance of IEEE 802.11 MAC mechanism in non-saturation conditions, (ii) to use the analysis in the context of multi-hop ad hoc networks, (iii) to derive theoretical limits for nodes performance in multi-hop ad hoc networks, (iv) to use the multi-hop analysis in QoS route selection. We start the thesis by proposing a discrete-time 3D Markov chain model to analyze the saturation performance of the RTS/CTS access mode. This model integrates the backoff countdown process, retransmission retry limits, and transmission errors into one model. The impact of system parameters (e.g., number of nodes, packet size, retry limits, and BERs) are analyzed. Next, we extend the 3D model to analyze the performance under non-saturation conditions and finite buffer capacity using two different approaches. First, we extend the 3D model into a 4D model to integrate the transmission buffer behavior. Second, we replace the 4D model by an M/G/1/K queueing system model with independent samples from the saturation analysis. The latter model gives similar results as the former but with a reduction in the analysis complexity. Next and by means of the non-saturation analysis, we proposed an approximate mathematical model for multi-hop ad hoc networks. Furthermore, we proposed an iterative mechanism to estimate the throughput in the presence of multiple flows. Finally, we used the multi-hop analysis to propose a QoS route selection algorithm. In this algorithm, we concentrate on the throughput as a QoS parameter. However, the proposed algorithm is valid to be used with other QoS parameters, such as packet delay, packet loss probability, and fairness. Analytical and simulation results show the deficiency of the current route selection algorithm in AODV and at the same time verifies the need for QoS route selection algorithms

Energy-efficient routing protocols in heterogeneous wireless sensor networks

Sensor networks feature low-cost sensor devices with wireless network capability, limited transmit power, resource constraints and limited battery energy. The usage of cheap and tiny wireless sensors will allow very large networks to be deployed at a feasible cost to provide a bridge between information systems and the physical world. Such large-scale deployments will require routing protocols that scale to large network sizes in an energy-efficient way. This thesis addresses the design of such network routing methods. A classification of existing routing protocols and the key factors in their design (i.e., hardware, topology, applications) provides the motivation for the new three-tier architecture for heterogeneous networks built upon a generic software framework (GSF). A range of new routing algorithms have hence been developed with the design goals of scalability and energy-efficient performance of network protocols. They are respectively TinyReg - a routing algorithm based on regular-graph theory, TSEP - topological stable election protocol, and GAAC - an evolutionary algorithm based on genetic algorithms and ant colony algorithms. The design principle of our routing algorithms is that shortening the distance between the cluster-heads and the sink in the network, will minimise energy consumption in order to extend the network lifetime, will achieve energy efficiency. Their performance has been evaluated by simulation in an extensive range of scenarios, and compared to existing algorithms. It is shown that the newly proposed algorithms allow long-term continuous data collection in large networks, offering greater network longevity than existing solutions. These results confirm the validity of the GSF as an architectural approach to the deployment of large wireless sensor networks

Mobile Ad-Hoc Networks

Being infrastructure-less and without central administration control, wireless ad-hoc networking is playing a more and more important role in extending the coverage of traditional wireless infrastructure (cellular networks, wireless LAN, etc). This book includes state-of-the-art techniques and solutions for wireless ad-hoc networks. It focuses on the following topics in ad-hoc networks: quality-of-service and video communication, routing protocol and cross-layer design. A few interesting problems about security and delay-tolerant networks are also discussed. This book is targeted to provide network engineers and researchers with design guidelines for large scale wireless ad hoc networks

Quality of service support for multimedia applications in mobile ad hoc networks

EThOS - Electronic Theses Online ServiceGBUnited Kingdo

Telecommunications Networks

This book guides readers through the basics of rapidly emerging networks to more advanced concepts and future expectations of Telecommunications Networks. It identifies and examines the most pressing research issues in Telecommunications and it contains chapters written by leading researchers, academics and industry professionals. Telecommunications Networks - Current Status and Future Trends covers surveys of recent publications that investigate key areas of interest such as: IMS, eTOM, 3G/4G, optimization problems, modeling, simulation, quality of service, etc. This book, that is suitable for both PhD and master students, is organized into six sections: New Generation Networks, Quality of Services, Sensor Networks, Telecommunications, Traffic Engineering and Routing