52 research outputs found

    A Survey of Blind Modulation Classification Techniques for OFDM Signals

    Get PDF
    Blind modulation classification (MC) is an integral part of designing an adaptive or intelligent transceiver for future wireless communications. Blind MC has several applications in the adaptive and automated systems of sixth generation (6G) communications to improve spectral efficiency and power efficiency, and reduce latency. It will become a integral part of intelligent software-defined radios (SDR) for future communication. In this paper, we provide various MC techniques for orthogonal frequency division multiplexing (OFDM) signals in a systematic way. We focus on the most widely used statistical and machine learning (ML) models and emphasize their advantages and limitations. The statistical-based blind MC includes likelihood-based (LB), maximum a posteriori (MAP) and feature-based methods (FB). The ML-based automated MC includes k-nearest neighbors (KNN), support vector machine (SVM), decision trees (DTs), convolutional neural networks (CNNs), recurrent neural networks (RNNs), and long short-term memory (LSTM) based MC methods. This survey will help the reader to understand the main characteristics of each technique, their advantages and disadvantages. We have also simulated some primary methods, i.e., statistical- and ML-based algorithms, under various constraints, which allows a fair comparison among different methodologies. The overall system performance in terms bit error rate (BER) in the presence of MC is also provided. We also provide a survey of some practical experiment works carried out through National Instrument hardware over an indoor propagation environment. In the end, open problems and possible directions for blind MC research are briefly discussed

    Design and implementation of an uplink connection for a light-based IoT node

    Get PDF
    Abstract. In the wake of soaring demand for shrinking radio frequency (RF) spectrum, light-fidelity (LiFi) has been heralded as a solution to accommodate resources for future communication networks. Infrared (IR) and visible light communication (VLC) are meant to be used within LiFi because of numerous advantages. By combining the paradigm of internet of things (IoT) along with LiFi, light-based IoT (LIoT) emerges as a potential enabler of future 6G networks. With tremendous number of interconnected devices, LIoT nodes need to be able to receive and transmit data while being energy autonomous. One of the most promising clean energy sources comes from both natural and artificial light. In addition to providing illumination and energy, light can also be utilized as a robust information carrier. In order to provide bidirectional connectivity to LIoT node, both downlink and uplink have to be taken into consideration. Whereas downlink relies on visible light as a carrier, uplink approach can be engineered freely within specific requirements. With this in mind, this master’s thesis explores possible solutions for providing uplink connectivity. After analysis of possible solutions, the LIoT proof-of-concept was designed, implemented and validated. By incorporating printed solar cell, dedicated energy harvesting unit, power-optimised microcontroller unit (MCU) and light intensity sensor the LIoT node is able to autonomously transmit data using IR

    Review of Recent Trends

    Get PDF
    This work was partially supported by the European Regional Development Fund (FEDER), through the Regional Operational Programme of Centre (CENTRO 2020) of the Portugal 2020 framework, through projects SOCA (CENTRO-01-0145-FEDER-000010) and ORCIP (CENTRO-01-0145-FEDER-022141). Fernando P. Guiomar acknowledges a fellowship from “la Caixa” Foundation (ID100010434), code LCF/BQ/PR20/11770015. Houda Harkat acknowledges the financial support of the Programmatic Financing of the CTS R&D Unit (UIDP/00066/2020).MIMO-OFDM is a key technology and a strong candidate for 5G telecommunication systems. In the literature, there is no convenient survey study that rounds up all the necessary points to be investigated concerning such systems. The current deeper review paper inspects and interprets the state of the art and addresses several research axes related to MIMO-OFDM systems. Two topics have received special attention: MIMO waveforms and MIMO-OFDM channel estimation. The existing MIMO hardware and software innovations, in addition to the MIMO-OFDM equalization techniques, are discussed concisely. In the literature, only a few authors have discussed the MIMO channel estimation and modeling problems for a variety of MIMO systems. However, to the best of our knowledge, there has been until now no review paper specifically discussing the recent works concerning channel estimation and the equalization process for MIMO-OFDM systems. Hence, the current work focuses on analyzing the recently used algorithms in the field, which could be a rich reference for researchers. Moreover, some research perspectives are identified.publishersversionpublishe

    6G Wireless Systems: Vision, Requirements, Challenges, Insights, and Opportunities

    Full text link
    Mobile communications have been undergoing a generational change every ten years or so. However, the time difference between the so-called "G's" is also decreasing. While fifth-generation (5G) systems are becoming a commercial reality, there is already significant interest in systems beyond 5G, which we refer to as the sixth-generation (6G) of wireless systems. In contrast to the already published papers on the topic, we take a top-down approach to 6G. We present a holistic discussion of 6G systems beginning with lifestyle and societal changes driving the need for next generation networks. This is followed by a discussion into the technical requirements needed to enable 6G applications, based on which we dissect key challenges, as well as possibilities for practically realizable system solutions across all layers of the Open Systems Interconnection stack. Since many of the 6G applications will need access to an order-of-magnitude more spectrum, utilization of frequencies between 100 GHz and 1 THz becomes of paramount importance. As such, the 6G eco-system will feature a diverse range of frequency bands, ranging from below 6 GHz up to 1 THz. We comprehensively characterize the limitations that must be overcome to realize working systems in these bands; and provide a unique perspective on the physical, as well as higher layer challenges relating to the design of next generation core networks, new modulation and coding methods, novel multiple access techniques, antenna arrays, wave propagation, radio-frequency transceiver design, as well as real-time signal processing. We rigorously discuss the fundamental changes required in the core networks of the future that serves as a major source of latency for time-sensitive applications. While evaluating the strengths and weaknesses of key 6G technologies, we differentiate what may be achievable over the next decade, relative to what is possible.Comment: Accepted for Publication into the Proceedings of the IEEE; 32 pages, 10 figures, 5 table

    Iterative decoding scheme for cooperative communications

    Get PDF

    Mixed-numerology for radio access network slicing

    Get PDF
    Network slicing is a sustainable solution to support the various service types in future networks. In general, network slicing is composed of core network slicing and radio access network (RAN) slicing. The former can be realized by allocating dedicated virtualized core network functionalities to specific slices. Similarly, RAN slicing includes the virtualization and allocation of the limited RAN resources. From the physical layer perspective, supporting RAN slicing implies the need of unique radio-frequency (RF) and baseband (BB) configurations, i.e., numerology, for each slice to fulfil its quality of service requirements. To support such a heterogeneous mixed-numerology (MN) system, the transceiver architecture and widely used signal processing algorithms in the traditional single-service system need to be significantly changed. A clear understanding of mixed-numerology signals multiplexing and isolation is of importance to enable spectrum and computation efficient RAN slicing. Meanwhile, an effective channel estimation is the guarantee of performing almost all receiver signal processing. Fundamental channel estimation investigations also constitute a crucial piece of MN study. This thesis aims to systematically investigate the OFDM-based MN wireless communication systems in terms of system modeling, channel equalization/ estimation, and power allocation. First, a comprehensive mixed-numerology framework with two numerologies is proposed and characterized by physical layer parameters. According to the BB and RF configurations imparities among numerologies, four scenarios are categorized and elaborated on the configuration relationships of different numerologies. System models considering the most generic scenario are established for both uplink and downlink transmissions. Two theorems are proposed as the basis of MN algorithms design, which generalize the original circular convolution property of the discrete Fourier transform. The proposed theorems verifies the feasibility of the one-tap channel equalization in MN systems. However, they also indicate that both BB and RF configuration differences result in inter-numerology-interference (INI). Besides, severe signal distortion may occur when the transmitter and receiver numerologies are different. Therefore, a pre-coding algorithm is designed by utilizing the theorems to compensate the system degradation resulting from the signal distortion. INI cancellation algorithms are proposed based on collaboration detection scheme and joint numerologies signal models for downlink and uplink, respectively. Numerical results shows that the proposed algorithms are able to significantly improve the system performance. Another objective of this thesis is to verify the effectiveness of the existing channel estimation algorithms and to develop new ones in the presence of MN. To achieve these goals, three channel estimation methods, i.e., least-square linear interpolation, least-square ‘sinc’ interpolation, and minimum mean square error ‘sinc’ interpolation are implemented and theoretically analyzed in both single-user and multi-user scenarios. The analysis reveals that the pilot signal to noise ratio, pilot distance, and position of pilot signals jointly affect the channel estimation. In particular, a signal distortion factor caused by the RF configuration difference is spotted to seriously affect the channel estimation performance, whose values are mainly decided by the degree of configuration mismatch. On the other hand, INI also degrades the channel estimation in the MN system. The existence of interference-free subcarriers is demonstrated based on the derived closed-form expression of the INI. Pilot design principles in terms of pilot signal placement are developed according to the analyses. Numerical results shows that minimum mean square error based channel estimation has the best performance and robustness to the configuration mismatch. In addition, the proposed pilot design principles could produce comparable channel estimation results with the legacy OFDM systems where no INI and signal distortion exist. The two problems associated with the MN system, i.e., signal distortion and INI, could negatively affect the power distribution of the received MN signals, and the system performance in terms of spectrum efficiency may be seriously degraded. Consequently, it becomes outstandingly important to introduce an efficient subcarrier-level power allocation scheme in such kinds of systems to counter the performance degradation caused by the configuration mismatch. As such, this thesis makes the attempt to extend the two-numerology model to contain ‘M’ different numerologies. Based on the model, closed-form expressions of desired signal, interference, and noise are derived. The derivation shows that interference generated from different numeroloies are linearly superimposed in the frequency domain. The distribution of signal-to-interference-plus-noiseratio (SINR) is analyzed theoretically. An iterative convex approximation power allocation algorithm is proposed by applying the derived SINR. Results show that the power allocation algorithm contributes to remarkable spectrum efficiency improvement compare to the other schemes, and an extra subband filtering process could bring about even higher performance. The work presented in this thesis provides guidance for multi-numerology system design in terms of parameter selection, and the frame structure and algorithms design. Moreover, it presents a solution as to how the radio access network slicing can be underpinned in the physical layer in a spectrum efficient way
    corecore