A Review of the Energy Efficient and Secure Multicast Routing Protocols for Mobile Ad hoc Networks

This paper presents a thorough survey of recent work addressing energy efficient multicast routing protocols and secure multicast routing protocols in Mobile Ad hoc Networks (MANETs). There are so many issues and solutions which witness the need of energy management and security in ad hoc wireless networks. The objective of a multicast routing protocol for MANETs is to support the propagation of data from a sender to all the receivers of a multicast group while trying to use the available bandwidth efficiently in the presence of frequent topology changes. Multicasting can improve the efficiency of the wireless link when sending multiple copies of messages by exploiting the inherent broadcast property of wireless transmission. Secure multicast routing plays a significant role in MANETs. However, offering energy efficient and secure multicast routing is a difficult and challenging task. In recent years, various multicast routing protocols have been proposed for MANETs. These protocols have distinguishing features and use different mechanismsComment: 15 page

Coherent, automatic address resolution for vehicular ad hoc networks

Published in: Int. J. of Ad Hoc and Ubiquitous Computing, 2017 Vol.25, No.3, pp.163 - 179. DOI: 10.1504/IJAHUC.2017.10001935The interest in vehicular communications has increased notably. In this paper, the use of the address resolution (AR) procedures is studied for vehicular ad hoc networks (VANETs). We analyse the poor performance of AR transactions in such networks and we present a new proposal called coherent, automatic address resolution (CAAR). Our approach inhibits the use of AR transactions and instead increases the usefulness of routing signalling to automatically match the IP and MAC addresses. Through extensive simulations in realistic VANET scenarios using the Estinet simulator, we compare our proposal CAAR to classical AR and to another of our proposals that enhances AR for mobile wireless networks, called AR+. In addition, we present a performance evaluation of the behaviour of CAAR, AR and AR+ with unicast traffic of a reporting service for VANETs. Results show that CAAR outperforms the other two solutions in terms of packet losses and furthermore, it does not introduce additional overhead.Postprint (published version

Development of a Reliable Multicast Protocol in Mobile Ad Hoc Networks

Mobile ad hoc network is a collection of mobile nodes forming dynamic and temporary network. The mobile nodes work in collaborative nature to carry out a given task. It can receive and transmit data packets without the use of any existing network infrastructure or centralized administration. Multicasting is among the pertinent issues of communication in such networks. The reliable delivery of multicast data packets needs feedback from all multicast receivers to indicate whether a retransmission is necessary. The Feedback Implosion Problem (FIP) states that reliable multicast in ad hoc networks suffers from redundant feedback packets, loss, duplication, and out-of-order delivery of data packets. To carry out this task, several reliable multicast protocols have been proposed to reduce the number of feedback packets from the receiver nodes. This is achieved by placing the responsibility to detect packet loss and initiating loss recovery timer on the receiver nodes which is complemented by feedback suppression. The initiating loss recovery timer depends on the number of hops between the nodes. As the dynamic nature of the number of hops between the nodes in ad hoc networks is unstable the loss recovery timer become inaccurate. Thus, the inaccuracy of the loss recovery timer, in return, causes extra overhead and more delays. The main objectives of this research are to enhance the FIP and decrease the recovery delays in reliable multicast protocol for mobile ad hoc networks using suggested approaches. First, the Source Tree Reliable Multicast (STRM) protocol adopting a novel technique to select a subset of one-hop neighbors from the sender node as its Forward Servers (FS). The key idea behind selecting this subset one-hop neighbors is to forward the retransmitted lost data packets and to receive the feedback packets from the receiver nodes. Second, proposed two algorithms to improve the performance of the STRM protocol. The first algorithm is developed to avoid the buffer overflow in the FS nodes. This is achieved by managing the buffer of the FS nodes; by selecting the FS nodes depending on the empty buffer size it has and reducing the amount of feedback sent from the receiver nodes to their FS node. The second algorithm is developed to decrease the number of duplicated packets in the multicast members in the local group. This is achieved by sending the repair packets only to the member that has requested it. The FS in the local group should create a dynamic and temporary sub group whose members are only the members that requested the retransmission of the repair packet. The approaches were tested using detailed discrete-event simulation model which was developed encompassing messaging system that includes error, delay and mobility models to characterize the performance benefits of the proposed algorithms in comparison to ReMHoc protocol. Our approaches achieve up to 2.19% improvement on average packet delivery ratio, 3.3% on requested packets, and 46% on recovery latency time without incurring any additional communication or intense computation

Research on Quality of Service Based Routing Protocols for Mobile Ad Hoc Networks

Quality of service (QoS) based routing protocols play a significant role in MANETs to maintain proper flow of data with efficient power consumption and without data loss. However, several network resource based technical challenges or issues are encountered in the design and implementation of QoS routing protocols that perform their routing function by considering the shortest route or the lowest cost. Furthermore, a secondary route is not reserved and alternative routes are not searched unless the established route is broken. The current structures of the state-of-the-art protocols for MANETs are not appropriate for today's high bandwidth and mobility requirements. Therefore, research on new routing protocols is needed, considering energy level, coverage, location, speed, movement, and link stability instead of only shortest path and lowest cost. This paper summarizes the main characteristics of QoS-based routing protocols to facilitate researchers to design and select QoS-based routing protocols. In this study, a wide range of protocols with their characteristics were classified according to QoS routing strategy, routing information update mechanism, interaction between network and MAC layer, QoS constraints, QoS guarantee type and number of discovered routes. In addition, the protocols were compared in terms of properties, design features, challenges and QoS metrics

Hybrid Wireless Network Approach for QoS

Fast improvement of wireless networks has stimulated variety of wireless applications that have been used in number of areas such as commerce, emergency services, military, education, and entertainment. As wireless communication capture popularity, specific research has been devoted to supporting real-time transmission with Quality of Service (QoS) requirements for wireless network applications. At the same time, a wireless hybrid network that combines a mobile wireless ad hoc network (MANET) and a wireless infrastructure network has been considered to be a better option for the next generation wireless networks. By directly implementing resource reservation-based QoS routing for MANETs, hybrids networks inherit invalid reservation and race condition problems in MANETs

Performance Assessment of Routing Protocols for IoT/6LoWPAN Networks

The Internet of Things (IoT) proposes a disruptive communication paradigm that allows smart objects to exchange data among themselves to reach a common goal. IoT application scenarios are multiple and can range from a simple smart home lighting system to fully controlled automated manufacturing chains. In the majority of IoT deployments, things are equipped with small devices that can suffer from severe hardware and energy restrictions that are responsible for performing data processing and wireless communication tasks. Thus, due to their features, communication networks that are used by these devices are generally categorized as Low Power and Lossy Networks (LLNs). The considerable variation in IoT applications represents a critical issue to LLN networks, which should offer support to different requirements as well as keeping reasonable quality-of-service (QoS) levels. Based on this challenge, routing protocols represent a key issue in IoT scenarios deployment. Routing protocols are responsible for creating paths among devices and their interactions. Hence, network performance and features are highly dependent on protocol behavior. Also, based on the adopted protocol, the support for some specific requirements of IoT applications may or may not be provided. Thus, a routing protocol should be projected to attend the needs of the applications considering the limitations of the device that will execute them. Looking to attend the demand of routing protocols for LLNs and, consequently, for IoT networks, the Internet Engineering Task Force (IETF) has designed and standardized the IPv6 Routing Protocol for Low Power and Lossy Networks (RPL). This protocol, although being robust and offering features to fulfill the need of several applications, still presents several faults and weaknesses (mainly related to its high complexity and memory requirement), which limits its adoption in IoT scenarios. An alternative to RPL, the Lightweight On-demand Ad Hoc Distancevector Routing Protocol – Next Generation (LOADng) has emerged as a less complicated routing solution for LLNs. However, the cost of its simplicity is paid for with the absence of adequate support for a critical set of features required for many IoT environments. Thus, based on the challenging open issues related to routing in IoT networks, this thesis aims to study and propose contributions to better attend the network requirements of IoT scenarios. A comprehensive survey, reviewing state-of-the-art routing protocols adopted for IoT, identified the strengths and weaknesses of current solutions available in the literature. Based on the identified limitations, a set of improvements is designed to overcome these issues and enhance IoT network performance. The novel solutions are proposed to include reliable and efficient support to attend the needs of IoT applications, such as mobility, heterogeneity, and different traffic patterns. Moreover, mechanisms to improve the network performance in IoT scenarios, which integrate devices with different communication technologies, are introduced. The studies conducted to assess the performance of the proposed solutions showed the high potential of the proposed solutions. When the approaches presented in this thesis were compared with others available in the literature, they presented very promising results considering the metrics related to the Quality of Service (QoS), network and energy efficiency, and memory usage as well as adding new features to the base protocols. Hence, it is believed that the proposed improvements contribute to the state-of-the-art of routing solutions for IoT networks, increasing the performance and adoption of enhanced protocols.A Internet das Coisas, do inglês Internet of Things (IoT), propõe um paradigma de comunicação disruptivo para possibilitar que dispositivos, que podem ser dotados de comportamentos autónomos ou inteligentes, troquem dados entre eles buscando alcançar um objetivo comum. Os cenários de aplicação do IoT são muito variados e podem abranger desde um simples sistema de iluminação para casa até o controle total de uma linha de produção industrial. Na maioria das instalações IoT, as “coisas” são equipadas com um pequeno dispositivo, responsável por realizar as tarefas de comunicação e processamento de dados, que pode sofrer com severas restrições de hardware e energia. Assim, devido às suas características, a rede de comunicação criada por esses dispositivos é geralmente categorizada como uma Low Power and Lossy Network (LLN). A grande variedade de cenários IoT representam uma questão crucial para as LLNs, que devem oferecer suporte aos diferentes requisitos das aplicações, além de manter níveis de qualidade de serviço, do inglês Quality of Service (QoS), adequados. Baseado neste desafio, os protocolos de encaminhamento constituem um aspecto chave na implementação de cenários IoT. Os protocolos de encaminhamento são responsáveis por criar os caminhos entre os dispositivos e permitir suas interações. Assim, o desempenho e as características da rede são altamente dependentes do comportamento destes protocolos. Adicionalmente, com base no protocolo adotado, o suporte a alguns requisitos específicos das aplicações de IoT podem ou não ser fornecidos. Portanto, estes protocolos devem ser projetados para atender as necessidades das aplicações assim como considerando as limitações do hardware no qual serão executados. Procurando atender às necessidades dos protocolos de encaminhamento em LLNs e, consequentemente, das redes IoT, a Internet Engineering Task Force (IETF) desenvolveu e padronizou o IPv6 Routing Protocol for Low Power and Lossy Networks (RPL). O protocolo, embora seja robusto e ofereça recursos para atender às necessidades de diferentes aplicações, apresenta algumas falhas e fraquezas (principalmente relacionadas com a sua alta complexidade e necessidade de memória) que limitam sua adoção em cenários IoT. Em alternativa ao RPL, o Lightweight On-demand Ad hoc Distance-vector Routing Protocol – Next Generation (LOADng) emergiu como uma solução de encaminhamento menos complexa para as LLNs. Contudo, o preço da simplicidade é pago com a falta de suporte adequado para um conjunto de recursos essenciais necessários em muitos ambientes IoT. Assim, inspirado pelas desafiadoras questões ainda em aberto relacionadas com o encaminhamento em redes IoT, esta tese tem como objetivo estudar e propor contribuições para melhor atender os requisitos de rede em cenários IoT. Uma profunda e abrangente revisão do estado da arte sobre os protocolos de encaminhamento adotados em IoT identificou os pontos fortes e limitações das soluções atuais. Com base nas debilidades encontradas, um conjunto de soluções de melhoria é proposto para superar carências existentes e melhorar o desempenho das redes IoT. As novas soluções são propostas para incluir um suporte confiável e eficiente capaz atender às necessidades das aplicações IoT relacionadas com suporte à mobilidade, heterogeneidade dos dispositivos e diferentes padrões de tráfego. Além disso, são introduzidos mecanismos para melhorar o desempenho da rede em cenários IoT que integram dispositivos com diferentes tecnologias de comunicação. Os vários estudos realizados para mensurar o desempenho das soluções propostas mostraram o grande potencial do conjunto de melhorias introduzidas. Quando comparadas com outras abordagens existentes na literatura, as soluções propostas nesta tese demonstraram um aumento do desempenho consistente para métricas relacionadas a qualidade de serviço, uso de memória, eficiência energética e de rede, além de adicionar novas funcionalidades aos protocolos base. Portanto, acredita-se que as melhorias propostas contribuiem para o avanço do estado da arte em soluções de encaminhamento para redes IoT e aumentar a adoção e utilização dos protocolos estudados